Subversion Repositories or1k

// This model is the property of Cypress Semiconductor Corp and is protected 
 
// by the US copyright laws, any unauthorized copying and distribution is prohibited.
 
// Cypress reserves the right to change any of the functional specifications without
 
// any prior notice.
 
// Cypress is not liable for any damages which may result from the use of this 
 
// functional model.
 
//This model checks for all the timimg violations and if any timing specifications are violated,the output might be undefined or go to a high impedance state while reading.Please note that the variable "tsim" in this model has to be changed as per your convenience for the simulation time.
 
//      Model:       256Kx16 model 
 
//      Contact:     mpd_apps@cypress.com  
 
//******************************************************************************
`timescale 1 ns/1 ps
 
 
module A256Kx16(Address,dataIO ,OE_bar,CE_bar,WE_bar,BLE_bar, BHE_bar);
 
`define tsim  30000
 
 
 
input [17:0] Address;
inout [15:0]  dataIO ;
input OE_bar,CE_bar,WE_bar, BLE_bar, BHE_bar;
reg   [7:0] temp_array0 [262143:0];
reg   [15:8] temp_array1 [262143:0];
reg   [7:0] mem_array0 [262143:0];
reg   [15:8] mem_array1 [262143:0];
reg   [15:0] data_temp;
reg   [17:0] Address1,Address2,Address3,Address4 ;
reg   [15:0] dataIO1;
reg   ini_cebar,ini_webar,ini_wecebar;
reg   initiate_write1,initiate_write2,initiate_write3;
reg   initiate_read1,initiate_read2; 
reg   delayed_WE;
 
time twc ;
time tpwe;
time tsce;
time tsd ;
time trc;
time thzwe;
time tdoe;
 
 
time write_address1,write_data1,write_CE_bar_start1,write_WE_bar_start1; 
time write_CE_bar_start,write_WE_bar_start,write_address,write_data;
time read_address,read_CE_bar_start,read_WE_bar_start;
 
initial
  begin
    initiate_write1 = 1'b0;
    initiate_write2 = 1'b0;
    initiate_write3 = 1'b0;
    initiate_read1 =1'b0;
    initiate_read2 =1'b0;
    read_address =0;  
    twc =10 ;
    tpwe =7;
    tsce =7 ;
    tsd = 5 ;
    trc =10 ;
    thzwe = 5;
    tdoe = 5;   
  end
 
// Added thzwe for WE_bar going low
 
wire [15:0] dataIO =  (!OE_bar && delayed_WE) ?  data_temp[15:0] : 16'bz ;
 
always@(CE_bar or WE_bar or OE_bar or Address or dataIO )
 begin
 
	if ((CE_bar==1'b0) && (WE_bar ==1'b0))
           begin
              Address1 <= Address;
              Address2 <= Address1;
              dataIO1  <= dataIO;  
 	      temp_array0[Address1] <=  dataIO1[7:0] ;
              temp_array1[Address1] <=  dataIO1[15:8] ;
           end
 end
 
always@(negedge CE_bar)
   begin
     write_CE_bar_start <= $time;
     read_CE_bar_start <=$time;
     ini_cebar <= 1'b0;
     ini_wecebar<=1'b0;
   end
 
//*******************Write_cycle**********************
 
always@(posedge CE_bar)
   begin
      if (($time - write_CE_bar_start) >= tsce)
         begin
            if ( (WE_bar == 1'b0) && ( ($time - write_WE_bar_start) >=tpwe) )
              begin
               Address2 <= Address1;
               temp_array0[Address1] <= dataIO1[7:0];  
               temp_array1[Address1] <= dataIO1[15:8] ;  
               ini_cebar <= 1'b1;
              end
            else
               ini_cebar <= 1'b0;
         end            
      else
         begin 
           ini_cebar <= 1'b0;
         end
   end
 
always@(negedge WE_bar)
   begin
      write_WE_bar_start <= $time;
      ini_webar <= 1'b0;
      ini_wecebar<=1'b0;
#thzwe delayed_WE <= WE_bar;
 
   end
 
always@(posedge WE_bar  )
   begin
      delayed_WE <= WE_bar;
      read_WE_bar_start <=$time;
      if (($time - write_WE_bar_start) >=tpwe)
         begin
            if ( (CE_bar == 1'b0) && ( ($time - write_CE_bar_start) >= tsce) )
              begin
               Address2 <= Address1;   
               temp_array0[Address1] <= dataIO1[7:0]; 
               temp_array1[Address1] <= dataIO1[15:8] ;
               ini_webar <= 1'b1;
              end 
            else 
               ini_webar <= 1'b0;
         end       
      else
         begin
           ini_webar <= 1'b0;
         end 
end    
 
always@(CE_bar && WE_bar)
   begin
     if ( (CE_bar ==1'b1) && (WE_bar ==1'b1) )
        begin 
           if ( ( ($time - write_WE_bar_start) >=tpwe) && (($time-write_CE_bar_start) >=tsce))
             ini_wecebar <=1'b1;
           else
             ini_wecebar <= 1'b0 ;    
        end 
     else
        ini_wecebar <=1'b0;
   end
 
always@(dataIO)
  begin
     write_data <= $time;
     write_data1 <=write_data;
     write_WE_bar_start1 <=$time;
     write_CE_bar_start1 <=$time;
     if ( ($time - write_data) >= tsd)
       begin
         if ( (WE_bar == 1'b0) && (CE_bar == 1'b0))
           begin
             if ( ( ($time - write_CE_bar_start) >=tsce) && ( ($time - write_WE_bar_start) >=tpwe) && (($time - write_address) >=twc) )
                initiate_write2 <= 1'b1;
             else
                initiate_write2 <= 1'b0;
           end
       end
  end
 
always@(Address)
  begin
     write_address <= $time;
     write_address1 <= write_address;
     write_WE_bar_start1 <=$time;
     write_CE_bar_start1 <=$time;
     if ( ($time - write_address) >= twc)
       begin
         if ( (WE_bar == 1'b0) &&  (CE_bar ==1'b0))
           begin
             if ( ( ($time - write_CE_bar_start) >=tsce) && ( ($time - write_WE_bar_start) >=tpwe) && (($time - write_data) >=tsd) )
                initiate_write3 <= 1'b1;
             else
                initiate_write3 <= 1'b0;
           end
         else
            initiate_write3 <= 1'b0;
       end
     else
        initiate_write3 <= 1'b0;
  end
 
always@(ini_cebar or ini_webar or ini_wecebar) 
  begin
     if ( (ini_cebar == 1'b1) || (ini_webar == 1'b1) || (ini_wecebar == 1'b1) ) 
       begin
         if ( ( ($time - write_data1) >= tsd) && ( ($time - write_address1) >= twc) )
            initiate_write1 <= 1'b1;
         else
            initiate_write1 <= 1'b0;
       end
     else
       initiate_write1 <= 1'b0;
  end 
 
//Removed address change completing a write
// removed initiate_write3
 
//always@(initiate_write2 or initiate_write3)   
 always @(initiate_write2)  
begin
     if ( (initiate_write2==1'b1) || (initiate_write3==1'b1)) 
         begin         
            if ( ( ($time - write_WE_bar_start) >=tpwe) && ( ($time - write_CE_bar_start) >=tsce))
	      begin		
		 if (BLE_bar == 1'b0) 
                  mem_array0[Address2] <= temp_array0[Address2];
                 if(BHE_bar == 1'b0)
                  mem_array1[Address2] <= temp_array1[Address2];
              end
         end
      initiate_write2 <=1'b0;
      initiate_write3 <=1'b0;
  end  
 
always@( initiate_write1 )   
  begin
     if (initiate_write1==1'b1)   
         begin         
            if ( ( ($time - write_WE_bar_start) >=tpwe) && ( ($time - write_CE_bar_start) >=tsce) && (($time - write_WE_bar_start1) >=tpwe) && (($time - write_CE_bar_start1) >=tsce))     
              begin
  		 if (BLE_bar == 1'b0) 
                  mem_array0[Address2] <= temp_array0[Address2];
 
		if(BHE_bar == 1'b0)
                  mem_array1[Address2] <= temp_array1[Address2];
              end
         end
      initiate_write1 <=1'b0;
   end    
 
//*********************Read_cycle******************
 
always@(Address)
   begin 
     read_address <=$time;
     Address3 <=Address;
     Address4 <=Address3;
     if ( ($time - read_address) == trc) 
       begin
         if ( (CE_bar == 1'b0) && (WE_bar == 1'b1) )
           initiate_read1 <= 1'b1;
         else
           initiate_read1 <= 1'b0;
       end  
     else
       initiate_read1 <= 1'b0;
   end
 
always
  #1
  begin 
     if ( ($time - read_address) >= trc)
       begin
         if ( (CE_bar == 1'b0) && (WE_bar == 1'b1) )
           begin
             Address4 <=Address3;
             initiate_read2 <= 1'b1;
           end
         else
             initiate_read2 <= 1'b0;
       end
     else
       initiate_read2 <= 1'b0;
   end
initial # `tsim $finish;    
 
always@(initiate_read1 or initiate_read2)
   begin
     if ( (initiate_read1 == 1'b1) || (initiate_read2 == 1'b1) )
       begin
         if ( (CE_bar == 1'b0) && (WE_bar ==1'b1) )
           begin
             if ( ( ($time - read_WE_bar_start) >=trc) && ( ($time -read_CE_bar_start) >=trc) )
               begin
		if(BLE_bar == 1'b0)             
         	  data_temp[7:0] <= mem_array0[Address4];
		else
		  data_temp[7:0] <= 8'bzz;
 
		if(BHE_bar == 1'b0)
         	  data_temp[15:8] <= mem_array1[Address4];
		else
          	  data_temp[15:8] <= 8'bzz;
               end
             else 
               #thzwe data_temp <= 8'bzz;
           end
         else
           #thzwe data_temp <=8'bzz;
       end
        initiate_read1 <=1'b0;
        initiate_read2 <=1'b0;
   end
 
always @(Address)
 begin
   if (CE_bar == 1'b0 && WE_bar == 1'b1 && OE_bar == 1'b0)
     begin
      if (BLE_bar == 1'b0)
        #tdoe data_temp[7:0] <= mem_array0[Address];
      else
        data_temp[7:0] <= 8'bzz;
 
      if (BHE_bar == 1'b0)
        #tdoe data_temp[15:8] <= mem_array1[Address];  
      else
        data_temp[15:8] <= 8'bzz;
     end
 end
 
always @(WE_bar or OE_bar or  CE_bar)
 begin
   if (CE_bar == 1'b0 && WE_bar == 1'b1 && OE_bar == 1'b0)
     begin
       if (BLE_bar == 1'b0)
         #tdoe data_temp[7:0] <= mem_array0[Address3];
       if (BHE_bar == 1'b0)
         #tdoe data_temp[15:8] <= mem_array1[Address3];
     end 
 end
 
 
endmodule