OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [mp3/] [lib/] [xilinx/] [coregen/] [fifo_4095_16.veo] - Rev 1765

Compare with Previous | Blame | View Log

/*******************************************************************
* This file was created by the Xilinx CORE Generator tool, and     *
* is (c) Xilinx, Inc. 1998, 1999. No part of this file may be      *
* transmitted to any third party (other than intended by Xilinx)   *
* or used without a Xilinx programmable or hardwire device without *
* Xilinx's prior written permission.                               *
*******************************************************************/ 

// The following line must appear at the top of the file in which
// the core instantiation will be made. Ensure that the translate_off/_on
// compiler directives are correct for your synthesis tool(s)

// Your Verilog compiler/interpreter might require the following
// option or it's equivalent to help locate the Xilinx Core Library
// +incdir+${XILINX}/verilog/src
// Here ${XILINX} refers to the XILINX software installation directory.

//----------- Begin Cut here for LIBRARY inclusion --------// LIB_TAG

// synopsys translate_off

`include "XilinxCoreLib/async_fifo_v3_0.v"

// synopsys translate_on

// LIB_TAG_END ------- End LIBRARY inclusion --------------

// The following code must appear after the module in which it
// is to be instantiated. Ensure that the translate_off/_on compiler
// directives are correct for your synthesis tool(s).

//----------- Begin Cut here for MODULE Declaration -------// MOD_TAG
module fifo_4095_16 (
        DIN,
        WR_EN,
        WR_CLK,
        RD_EN,
        RD_CLK,
        AINIT,
        DOUT,
        FULL,
        EMPTY,
        ALMOST_FULL,
        ALMOST_EMPTY);

input [15 : 0] DIN;
input WR_EN;
input WR_CLK;
input RD_EN;
input RD_CLK;
input AINIT;
output [15 : 0] DOUT;
output FULL;
output EMPTY;
output ALMOST_FULL;
output ALMOST_EMPTY;

// synopsys translate_off

        ASYNC_FIFO_V3_0 #(
                16,
                0,
                4095,
                1,
                1,
                0,
                0,
                0,
                0,
                0,
                0,
                0,
                2,
                0,
                1,
                0,
                2,
                0)
        inst (
                .DIN(DIN),
                .WR_EN(WR_EN),
                .WR_CLK(WR_CLK),
                .RD_EN(RD_EN),
                .RD_CLK(RD_CLK),
                .AINIT(AINIT),
                .DOUT(DOUT),
                .FULL(FULL),
                .EMPTY(EMPTY),
                .ALMOST_FULL(ALMOST_FULL),
                .ALMOST_EMPTY(ALMOST_EMPTY));

// synopsys translate_on

endmodule

// MOD_TAG_END ------- End MODULE Declaration -------------

// The following must be inserted into your Verilog file for this
// core to be instantiated. Change the instance name and port connections
// (in parentheses) to your own signal names.

//----------- Begin Cut here for INSTANTIATION Template ---// INST_TAG
fifo_4095_16 YourInstanceName (
        .DIN(DIN),
        .WR_EN(WR_EN),
        .WR_CLK(WR_CLK),
        .RD_EN(RD_EN),
        .RD_CLK(RD_CLK),
        .AINIT(AINIT),
        .DOUT(DOUT),
        .FULL(FULL),
        .EMPTY(EMPTY),
        .ALMOST_FULL(ALMOST_FULL),
        .ALMOST_EMPTY(ALMOST_EMPTY));

// INST_TAG_END ------ End INSTANTIATION Template ---------

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.