URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [newlib/] [newlib/] [libc/] [Makefile.in] - Rev 1775
Go to most recent revision | Compare with Previous | Blame | View Log
# Makefile.in generated automatically by automake 1.4 from Makefile.am
# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
SHELL = @SHELL@
srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@
bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
DESTDIR =
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
AR = @AR@
AS = @AS@
CC = @CC@
CPP = @CPP@
CRT0 = @CRT0@
EXEEXT = @EXEEXT@
LIBC_MACHINE_LIB = @LIBC_MACHINE_LIB@
LIBC_POSIX_LIB = @LIBC_POSIX_LIB@
LIBC_SIGNAL_DEF = @LIBC_SIGNAL_DEF@
LIBC_SIGNAL_LIB = @LIBC_SIGNAL_LIB@
LIBC_SYSCALL_LIB = @LIBC_SYSCALL_LIB@
LIBC_SYS_LIB = @LIBC_SYS_LIB@
LIBC_UNIX_LIB = @LIBC_UNIX_LIB@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
PACKAGE = @PACKAGE@
RANLIB = @RANLIB@
VERSION = 1.8.2
machine_dir = @machine_dir@
newlib_basedir = @newlib_basedir@
sys_dir = @sys_dir@
AUTOMAKE_OPTIONS = cygnus
@HAVE_POSIX_DIR_TRUE@POSIX_SUBDIR = \
@HAVE_POSIX_DIR_TRUE@posix
@HAVE_SIGNAL_DIR_TRUE@SIGNAL_SUBDIR = \
@HAVE_SIGNAL_DIR_TRUE@signal
@HAVE_SYSCALL_DIR_TRUE@SYSCALLS_SUBDIR = \
@HAVE_SYSCALL_DIR_TRUE@syscalls
@HAVE_UNIX_DIR_TRUE@UNIX_SUBDIR = \
@HAVE_UNIX_DIR_TRUE@unix
# The order of SUBDIRS is important for the integrated documentation.
# Do not change the order without considering the doc impact.
SUBDIRS = stdlib ctype stdio string $(SIGNAL_SUBDIR) time locale sys reent \
errno misc machine $(UNIX_SUBDIR) $(POSIX_SUBDIR) $(SYSCALLS_SUBDIR) .
noinst_LIBRARIES = libc.a
noinst_DATA = $(CRT0)
SUBLIBS = \
stdlib/lib.a \
ctype/lib.a \
stdio/lib.a \
string/lib.a \
$(LIBC_SIGNAL_LIB) \
time/lib.a \
locale/lib.a \
$(LIBC_SYS_LIB) \
reent/lib.a \
errno/lib.a \
misc/lib.a \
$(LIBC_MACHINE_LIB) \
$(LIBC_UNIX_LIB) \
$(LIBC_POSIX_LIB) \
$(LIBC_SYSCALL_LIB)
info_TEXINFOS = libc.texinfo
# This is a list of the stmp-def files in each subdirectory which
# builds .def files. We don't list subdirectories which don't build
# .def files; if the list of subdirectories changes, we must change
# this as well.
SUBDEFS = \
stdlib/stmp-def \
ctype/stmp-def \
stdio/stmp-def \
string/stmp-def \
$(LIBC_SIGNAL_DEF) \
time/stmp-def \
locale/stmp-def \
reent/stmp-def \
misc/stmp-def
CLEANFILES = crt0.o \
sigset.texi stmp-sigset tmp.texi targetdep.tex stmp-targetdep
ACLOCAL_AMFLAGS = -I ..
CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/../../mkinstalldirs
CONFIG_CLEAN_FILES =
LIBRARIES = $(noinst_LIBRARIES)
DEFS = @DEFS@ -I. -I$(srcdir)
CPPFLAGS = @CPPFLAGS@
LDFLAGS = @LDFLAGS@
LIBS = @LIBS@
libc_a_LIBADD =
libc_a_SOURCES = libc.a.c
libc_a_OBJECTS = libc.a.o
CFLAGS = @CFLAGS@
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then echo $(top_srcdir)/../texinfo/util/texi2dvi; else echo texi2dvi; fi`
TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
INFO_DEPS = libc.info
DVIS = libc.dvi
TEXINFOS = libc.texinfo
DATA = $(noinst_DATA)
DIST_COMMON = Makefile.am Makefile.in aclocal.m4 configure configure.in
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = tar
GZIP_ENV = --best
DIST_SUBDIRS = stdlib ctype stdio string signal time locale sys reent \
errno misc machine unix posix syscalls .
SOURCES = libc.a.c
OBJECTS = libc.a.o
all: all-redirect
.SUFFIXES:
.SUFFIXES: .S .c .dvi .info .o .ps .s .texi .texinfo .txi
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
cd $(top_builddir) \
&& CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in ../acinclude.m4 \
../aclocal.m4
cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
$(SHELL) ./config.status --recheck
$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
cd $(srcdir) && $(AUTOCONF)
mostlyclean-noinstLIBRARIES:
clean-noinstLIBRARIES:
-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
distclean-noinstLIBRARIES:
maintainer-clean-noinstLIBRARIES:
.c.o:
$(COMPILE) -c $<
.s.o:
$(COMPILE) -c $<
.S.o:
$(COMPILE) -c $<
mostlyclean-compile:
-rm -f *.o core *.core
clean-compile:
distclean-compile:
-rm -f *.tab.c
maintainer-clean-compile:
libc.info: libc.texinfo
libc.dvi: libc.texinfo
DVIPS = dvips
.texi.info:
@rm -f $@ $@-[0-9] $@-[0-9][0-9]
$(MAKEINFO) -I $(srcdir) $<
.texi.dvi:
TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
.texi:
@rm -f $@ $@-[0-9] $@-[0-9][0-9]
$(MAKEINFO) -I $(srcdir) $<
.texinfo.info:
@rm -f $@ $@-[0-9] $@-[0-9][0-9]
$(MAKEINFO) -I $(srcdir) $<
.texinfo:
@rm -f $@ $@-[0-9] $@-[0-9][0-9]
$(MAKEINFO) -I $(srcdir) $<
.texinfo.dvi:
TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
.txi.info:
@rm -f $@ $@-[0-9] $@-[0-9][0-9]
$(MAKEINFO) -I $(srcdir) $<
.txi.dvi:
TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<
.txi:
@rm -f $@ $@-[0-9] $@-[0-9][0-9]
$(MAKEINFO) -I $(srcdir) $<
.dvi.ps:
$(DVIPS) $< -o $@
install-info-am: $(INFO_DEPS)
@$(NORMAL_INSTALL)
$(mkinstalldirs) $(DESTDIR)$(infodir)
@list='$(INFO_DEPS)'; \
for file in $$list; do \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
if test -f $$d/$$ifile; then \
echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
$(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
else : ; fi; \
done; \
done
@$(POST_INSTALL)
@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
list='$(INFO_DEPS)'; \
for file in $$list; do \
echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
done; \
else : ; fi
uninstall-info:
$(PRE_UNINSTALL)
@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
ii=yes; \
else ii=; fi; \
list='$(INFO_DEPS)'; \
for file in $$list; do \
test -z "$ii" \
|| install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
done
@$(NORMAL_UNINSTALL)
list='$(INFO_DEPS)'; \
for file in $$list; do \
(cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
done
dist-info: $(INFO_DEPS)
list='$(INFO_DEPS)'; \
for base in $$list; do \
if test -f $$base; then d=.; else d=$(srcdir); fi; \
for file in `cd $$d && eval echo $$base*`; do \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file; \
done; \
done
mostlyclean-aminfo:
-rm -f libc.aux libc.cp libc.cps libc.dvi libc.fn libc.fns libc.ky \
libc.kys libc.ps libc.log libc.pg libc.toc libc.tp libc.tps \
libc.vr libc.vrs libc.op libc.tr libc.cv libc.cn
clean-aminfo:
distclean-aminfo:
maintainer-clean-aminfo:
for i in $(INFO_DEPS); do \
rm -f $$i; \
if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
rm -f $$i-[0-9]*; \
fi; \
done
clean-info: mostlyclean-aminfo
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
@SET_MAKE@
all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
@set fnord $(MAKEFLAGS); amf=$$2; \
dot_seen=no; \
rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
rev="$$subdir $$rev"; \
test "$$subdir" = "." && dot_seen=yes; \
done; \
test "$$dot_seen" = "no" && rev=". $$rev"; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP)
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
here=`pwd` && cd $(srcdir) \
&& mkid -f$$here/ID $$unique $(LISP)
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
tags=; \
here=`pwd`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
END { for (i in files) print i; }'`; \
test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
|| (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
mostlyclean-tags:
clean-tags:
distclean-tags:
-rm -f TAGS ID
maintainer-clean-tags:
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
# This target untars the dist file and tries a VPATH configuration. Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
-rm -rf $(distdir)
GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
mkdir $(distdir)/=build
mkdir $(distdir)/=inst
dc_install_base=`cd $(distdir)/=inst && pwd`; \
cd $(distdir)/=build \
&& ../configure --srcdir=.. --prefix=$$dc_install_base \
&& $(MAKE) $(AM_MAKEFLAGS) \
&& $(MAKE) $(AM_MAKEFLAGS) dvi \
&& $(MAKE) $(AM_MAKEFLAGS) check \
&& $(MAKE) $(AM_MAKEFLAGS) install \
&& $(MAKE) $(AM_MAKEFLAGS) installcheck \
&& $(MAKE) $(AM_MAKEFLAGS) dist
-rm -rf $(distdir)
@banner="$(distdir).tar.gz is ready for distribution"; \
dashes=`echo "$$banner" | sed s/./=/g`; \
echo "$$dashes"; \
echo "$$banner"; \
echo "$$dashes"
dist: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
dist-all: distdir
-chmod -R a+r $(distdir)
GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
-rm -rf $(distdir)
distdir: $(DISTFILES)
-rm -rf $(distdir)
mkdir $(distdir)
-chmod 777 $(distdir)
@for file in $(DISTFILES); do \
if test -f $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
cp -pr $$/$$file $(distdir)/$$file; \
else \
test -f $(distdir)/$$file \
|| ln $$d/$$file $(distdir)/$$file 2> /dev/null \
|| cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
for subdir in $(DIST_SUBDIRS); do \
if test "$$subdir" = .; then :; else \
test -d $(distdir)/$$subdir \
|| mkdir $(distdir)/$$subdir \
|| exit 1; \
chmod 777 $(distdir)/$$subdir; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info
info-am: $(INFO_DEPS)
info: info-recursive
dvi-am: $(DVIS)
dvi: dvi-recursive
check-am:
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-info-am:
install-info: install-info-recursive
install-exec-am:
install-exec: install-exec-recursive
install-data-am:
install-data: install-data-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am:
uninstall: uninstall-recursive
all-am: Makefile $(LIBRARIES) $(DATA)
all-redirect: all-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
mostlyclean-generic:
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-rm -f Makefile $(CONFIG_CLEAN_FILES)
-rm -f config.cache config.log stamp-h stamp-h[0-9]*
maintainer-clean-generic:
mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \
mostlyclean-aminfo mostlyclean-tags mostlyclean-generic
mostlyclean: mostlyclean-recursive
clean-am: clean-noinstLIBRARIES clean-compile clean-aminfo clean-tags \
clean-generic mostlyclean-am
clean: clean-recursive
distclean-am: distclean-noinstLIBRARIES distclean-compile \
distclean-aminfo distclean-tags distclean-generic \
clean-am
distclean: distclean-recursive
-rm -f config.status
maintainer-clean-am: maintainer-clean-noinstLIBRARIES \
maintainer-clean-compile maintainer-clean-aminfo \
maintainer-clean-tags maintainer-clean-generic \
distclean-am
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
maintainer-clean: maintainer-clean-recursive
-rm -f config.status
.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
mostlyclean-compile distclean-compile clean-compile \
maintainer-clean-compile install-info-am uninstall-info \
mostlyclean-aminfo distclean-aminfo clean-aminfo \
maintainer-clean-aminfo install-data-recursive uninstall-data-recursive \
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
uninstalldirs-recursive all-recursive check-recursive \
installcheck-recursive info-recursive dvi-recursive \
mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-info-am \
install-info install-exec-am install-exec install-data-am install-data \
install-am install uninstall-am uninstall all-redirect all-am all \
installdirs-am installdirs mostlyclean-generic distclean-generic \
clean-generic maintainer-clean-generic clean mostlyclean distclean \
maintainer-clean
libc.a: $(SUBLIBS)
rm -f $@
rm -rf tmp
mkdir tmp
cd tmp; \
for i in $(SUBLIBS); do \
$(AR) x ../$$i; \
done; \
$(AR) $(AR_FLAGS) ../$@ *.o
$(RANLIB) $@
rm -rf tmp
$(SUBLIBS): ; @true
crt0.o: sys/crt0.o
rm -f $@
ln sys/crt0.o $@ >/dev/null 2>/dev/null || cp sys/crt0.o $@
sys/crt0.o: ; @true
libc.info: sigset.texi targetdep.tex $(SUBDEFS)
stmp-sigset: config.status
if test -n "$(LIBC_SIGNAL_LIB)"; then \
echo "@set SIGNALS" >tmp.texi; \
else \
echo "@clear SIGNALS" >tmp.texi; \
fi
$(SHELL) $(newlib_basedir)/../move-if-change tmp.texi sigset.texi
touch $@
sigset.texi: stmp-sigset ; @true
stmp-targetdep: force
rm -f tmp.texi
targetdoc=`pwd`/tmp.texi; \
for d in $(SUBDIRS); do \
if test "$$d" != "."; then \
(cd $$d && $(MAKE) TARGETDOC=$${targetdoc} doc) || exit 1; \
fi; \
done
cat $(srcdir)/sys.tex >>tmp.texi
$(SHELL) $(newlib_basedir)/../move-if-change tmp.texi targetdep.tex
touch $@
targetdep.tex: stmp-targetdep ; @true
$(SUBDEFS): stmp-targetdep ; @true
.PHONY: force
force:
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
Go to most recent revision | Compare with Previous | Blame | View Log