URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [newlib-1.10.0/] [newlib/] [aclocal.m4] - Rev 1775
Go to most recent revision | Compare with Previous | Blame | View Log
dnl aclocal.m4 generated automatically by aclocal 1.4 dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation dnl gives unlimited permission to copy and/or distribute it, dnl with or without modifications, as long as this notice is preserved. dnl This program is distributed in the hope that it will be useful, dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A dnl PARTICULAR PURPOSE. dnl This provides configure definitions used by all the newlib dnl configure.in files. dnl Basic newlib configury. This calls basic introductory stuff, dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST. It also runs dnl configure.host. The only argument is the relative path to the top dnl newlib directory. AC_DEFUN(NEWLIB_CONFIGURE, [ dnl Default to --enable-multilib AC_ARG_ENABLE(multilib, [ --enable-multilib build many library versions (default)], [case "${enableval}" in yes) multilib=yes ;; no) multilib=no ;; *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;; esac], [multilib=yes])dnl dnl Support --enable-target-optspace AC_ARG_ENABLE(target-optspace, [ --enable-target-optspace optimize for space], [case "${enableval}" in yes) target_optspace=yes ;; no) target_optspace=no ;; *) AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;; esac], [target_optspace=])dnl dnl Support --enable-malloc-debugging - currently only supported for Cygwin AC_ARG_ENABLE(malloc-debugging, [ --enable-malloc-debugging indicate malloc debugging requested], [case "${enableval}" in yes) malloc_debugging=yes ;; no) malloc_debugging=no ;; *) AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;; esac], [malloc_debugging=])dnl dnl Support --enable-newlib-mb AC_ARG_ENABLE(newlib-mb, [ --enable-newlib-mb enable multibyte support], [case "${enableval}" in yes) newlib_mb=yes ;; no) newlib_mb=no ;; *) AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;; esac], [newlib_mb=no])dnl dnl We may get other options which we don't document: dnl --with-target-subdir, --with-multisrctop, --with-multisubdir test -z "[$]{with_target_subdir}" && with_target_subdir=. if test "[$]{srcdir}" = "."; then if test "[$]{with_target_subdir}" != "."; then newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1" else newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1" fi else newlib_basedir="[$]{srcdir}/$1" fi AC_SUBST(newlib_basedir) AC_CANONICAL_HOST AM_INIT_AUTOMAKE(newlib, 1.10.0) # FIXME: We temporarily define our own version of AC_PROG_CC. This is # copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We # are probably using a cross compiler, which will not be able to fully # link an executable. This should really be fixed in autoconf # itself. AC_DEFUN(LIB_AC_PROG_CC, [AC_BEFORE([$0], [AC_PROG_CPP])dnl AC_CHECK_PROG(CC, gcc, gcc) if test -z "$CC"; then AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc) test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH]) fi AC_PROG_CC_GNU if test $ac_cv_prog_gcc = yes; then GCC=yes dnl Check whether -g works, even if CFLAGS is set, in case the package dnl plays around with CFLAGS (such as to build both debugging and dnl normal versions of a library), tasteless as that idea is. ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= AC_PROG_CC_G if test "$ac_test_CFLAGS" = set; then CFLAGS="$ac_save_CFLAGS" elif test $ac_cv_prog_cc_g = yes; then CFLAGS="-g -O2" else CFLAGS="-O2" fi else GCC= test "${CFLAGS+set}" = set || CFLAGS="-g" fi ]) LIB_AC_PROG_CC # AC_CHECK_TOOL does AC_REQUIRE (AC_CANONICAL_BUILD). If we don't # run it explicitly here, it will be run implicitly before # NEWLIB_CONFIGURE, which doesn't work because that means that it will # be run before AC_CANONICAL_HOST. AC_CANONICAL_BUILD AC_CHECK_TOOL(AS, as) AC_CHECK_TOOL(AR, ar) AC_CHECK_TOOL(RANLIB, ranlib, :) AC_PROG_INSTALL AM_MAINTAINER_MODE # We need AC_EXEEXT to keep automake happy in cygnus mode. However, # at least currently, we never actually build a program, so we never # need to use $(EXEEXT). Moreover, the test for EXEEXT normally # fails, because we are probably configuring with a cross compiler # which can't create executables. So we include AC_EXEEXT to keep # automake happy, but we don't execute it, since we don't care about # the result. if false; then AC_EXEEXT fi . [$]{newlib_basedir}/configure.host case [$]{newlib_basedir} in /* | [A-Za-z]:[/\\]*) newlib_flagbasedir=[$]{newlib_basedir} ;; *) newlib_flagbasedir='[$](top_builddir)/'[$]{newlib_basedir} ;; esac newlib_cflags="[$]{newlib_cflags} -I"'[$](top_builddir)'"/$1/targ-include -I[$]{newlib_flagbasedir}/libc/include" case "${host}" in *-*-cygwin*) newlib_cflags="[$]{newlib_cflags} -I[$]{newlib_flagbasedir}/../winsup/cygwin/include -I[$]{newlib_flagbasedir}/../winsup/w32api/include" ;; esac newlib_cflags="[$]{newlib_cflags} -fno-builtin" NEWLIB_CFLAGS=${newlib_cflags} AC_SUBST(NEWLIB_CFLAGS) LDFLAGS=${ldflags} AC_SUBST(LDFLAGS) AM_CONDITIONAL(USE_LIBTOOL, test x[$]{use_libtool} = xyes) AC_SUBST(oext) AC_SUBST(aext) AC_SUBST(libm_machine_dir) AC_SUBST(machine_dir) AC_SUBST(sys_dir) ]) # Do all the work for Automake. This macro actually does too much -- # some checks are only needed if your package does certain things. # But this isn't really a big deal. # serial 1 dnl Usage: dnl AM_INIT_AUTOMAKE(package,version, [no-define]) AC_DEFUN(AM_INIT_AUTOMAKE, [AC_REQUIRE([AC_PROG_INSTALL]) PACKAGE=[$1] AC_SUBST(PACKAGE) VERSION=[$2] AC_SUBST(VERSION) dnl test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi ifelse([$3],, AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) AC_REQUIRE([AM_SANITY_CHECK]) AC_REQUIRE([AC_ARG_PROGRAM]) dnl FIXME This is truly gross. missing_dir=`cd $ac_aux_dir && pwd` AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) AC_REQUIRE([AC_PROG_MAKE_SET])]) # # Check to make sure that the build environment is sane. # AC_DEFUN(AM_SANITY_CHECK, [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftestfile # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` if test "[$]*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftestfile` fi if test "[$]*" != "X $srcdir/configure conftestfile" \ && test "[$]*" != "X conftestfile $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "[$]2" = conftestfile ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi rm -f conftest* AC_MSG_RESULT(yes)]) dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) dnl The program must properly implement --version. AC_DEFUN(AM_MISSING_PROG, [AC_MSG_CHECKING(for working $2) # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. if ($2 --version) < /dev/null > /dev/null 2>&1; then $1=$2 AC_MSG_RESULT(found) else $1="$3/missing $2" AC_MSG_RESULT(missing) fi AC_SUBST($1)]) # Add --enable-maintainer-mode option to configure. # From Jim Meyering # serial 1 AC_DEFUN(AM_MAINTAINER_MODE, [AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) dnl maintainer-mode is disabled by default AC_ARG_ENABLE(maintainer-mode, [ --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer], USE_MAINTAINER_MODE=$enableval, USE_MAINTAINER_MODE=no) AC_MSG_RESULT($USE_MAINTAINER_MODE) AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) MAINT=$MAINTAINER_MODE_TRUE AC_SUBST(MAINT)dnl ] ) # Define a conditional. AC_DEFUN(AM_CONDITIONAL, [AC_SUBST($1_TRUE) AC_SUBST($1_FALSE) if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi]) # serial 40 AC_PROG_LIBTOOL AC_DEFUN(AC_PROG_LIBTOOL, [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl # Save cache, so that ltconfig can load it AC_CACHE_SAVE # Actually configure libtool. ac_aux_dir is where install-sh is found. CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ ${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ || AC_MSG_ERROR([libtool configure failed]) # Reload cache, that may have been modified by ltconfig AC_CACHE_LOAD # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl # Redirect the config.log output again, so that the ltconfig log is not # clobbered by the next message. exec 5>>./config.log ]) AC_DEFUN(AC_LIBTOOL_SETUP, [AC_PREREQ(2.13)dnl AC_REQUIRE([AC_ENABLE_SHARED])dnl AC_REQUIRE([AC_ENABLE_STATIC])dnl AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_LD])dnl AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl dnl # Check for any special flags to pass to ltconfig. libtool_flags="--cache-file=$cache_file" test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], [libtool_flags="$libtool_flags --enable-dlopen"]) ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], [libtool_flags="$libtool_flags --enable-win32-dll"]) AC_ARG_ENABLE(libtool-lock, [ --disable-libtool-lock avoid locking (might break parallel builds)]) test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" # Some flags need to be propagated to the compiler or linker for good # libtool support. case "$host" in *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case "`/usr/bin/file conftest.o`" in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], [*-*-cygwin* | *-*-mingw*) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) ;; ]) esac ]) # AC_LIBTOOL_DLOPEN - enable checks for dlopen support AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) # AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) # AC_ENABLE_SHARED - implement the --enable-shared flag # Usage: AC_ENABLE_SHARED[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN(AC_ENABLE_SHARED, [dnl define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(shared, changequote(<<, >>)dnl << --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case "$enableval" in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$ac_save_ifs" ;; esac], enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl ]) # AC_DISABLE_SHARED - set the default shared flag to --disable-shared AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_SHARED(no)]) # AC_ENABLE_STATIC - implement the --enable-static flag # Usage: AC_ENABLE_STATIC[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN(AC_ENABLE_STATIC, [dnl define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(static, changequote(<<, >>)dnl << --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case "$enableval" in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$ac_save_ifs" ;; esac], enable_static=AC_ENABLE_STATIC_DEFAULT)dnl ]) # AC_DISABLE_STATIC - set the default static flag to --disable-static AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_STATIC(no)]) # AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag # Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] # Where DEFAULT is either `yes' or `no'. If omitted, it defaults to # `yes'. AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE(fast-install, changequote(<<, >>)dnl << --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], changequote([, ])dnl [p=${PACKAGE-default} case "$enableval" in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," for pkg in $enableval; do if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$ac_save_ifs" ;; esac], enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl ]) # AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_FAST_INSTALL(no)]) # AC_PROG_LD - find the path to the GNU or non-GNU linker AC_DEFUN(AC_PROG_LD, [AC_ARG_WITH(gnu-ld, [ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl ac_prog=ld if test "$ac_cv_prog_gcc" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by GCC]) ac_prog=`($CC -print-prog-name=ld) 2>&5` case "$ac_prog" in # Accept absolute paths. changequote(,)dnl [\\/]* | [A-Za-z]:[\\/]*) re_direlt='/[^/][^/]*/\.\./' changequote([,])dnl # Canonicalize the path of ld ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(ac_cv_path_LD, [if test -z "$LD"; then IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ac_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else test "$with_gnu_ld" != yes && break fi fi done IFS="$ac_save_ifs" else ac_cv_path_LD="$LD" # Let the user override the test with a path. fi]) LD="$ac_cv_path_LD" if test -n "$LD"; then AC_MSG_RESULT($LD) else AC_MSG_RESULT(no) fi test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) AC_PROG_LD_GNU ]) AC_DEFUN(AC_PROG_LD_GNU, [AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, [# I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then ac_cv_prog_gnu_ld=yes else ac_cv_prog_gnu_ld=no fi]) ]) # AC_PROG_NM - find the path to a BSD-compatible name lister AC_DEFUN(AC_PROG_NM, [AC_MSG_CHECKING([for BSD-compatible nm]) AC_CACHE_VAL(ac_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. ac_cv_path_NM="$NM" else IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then ac_cv_path_NM="$ac_dir/nm -B" break elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then ac_cv_path_NM="$ac_dir/nm -p" break else ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags fi fi done IFS="$ac_save_ifs" test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm fi]) NM="$ac_cv_path_NM" AC_MSG_RESULT([$NM]) ]) # AC_CHECK_LIBM - check for math library AC_DEFUN(AC_CHECK_LIBM, [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case "$host" in *-*-beos* | *-*-cygwin*) # These system don't have libm ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, main, LIBM="-lm") ;; esac ]) # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for # the libltdl convenience library, adds --enable-ltdl-convenience to # the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor # is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed # to be `${top_builddir}/libltdl'. Make sure you start DIR with # '${top_builddir}/' (note the single quotes!) if your package is not # flat, and, if you're not using automake, define top_builddir as # appropriate in the Makefiles. AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl case "$enable_ltdl_convenience" in no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; "") enable_ltdl_convenience=yes ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl']) ]) # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for # the libltdl installable library, and adds --enable-ltdl-install to # the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor # is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed # to be `${top_builddir}/libltdl'. Make sure you start DIR with # '${top_builddir}/' (note the single quotes!) if your package is not # flat, and, if you're not using automake, define top_builddir as # appropriate in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_CHECK_LIB(ltdl, main, [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], [if test x"$enable_ltdl_install" = xno; then AC_MSG_WARN([libltdl not installed, but installation disabled]) else enable_ltdl_install=yes fi ]) if test x"$enable_ltdl_install" = x"yes"; then ac_configure_args="$ac_configure_args --enable-ltdl-install" LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl']) else ac_configure_args="$ac_configure_args --enable-ltdl-install=no" LIBLTDL="-lltdl" INCLTDL= fi ]) dnl old names AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl dnl This is just to silence aclocal about the macro not being used ifelse([AC_DISABLE_FAST_INSTALL])dnl
Go to most recent revision | Compare with Previous | Blame | View Log