Subversion Repositories or1k

//////////////////////////////////////////////////////////////////////
////                                                              ////
////  Generic Single-Port Synchronous RAM                         ////
////                                                              ////
////  This file is part of memory library available from          ////
////  http://www.opencores.org/cvsweb.shtml/generic_memories/     ////
////                                                              ////
////  Description                                                 ////
////  This block is a wrapper with common single-port             ////
////  synchronous memory interface for different                  ////
////  types of ASIC and FPGA RAMs. Beside universal memory        ////
////  interface it also provides behavioral model of generic      ////
////  single-port synchronous RAM.                                ////
////  It should be used in all OPENCORES designs that want to be  ////
////  portable accross different target technologies and          ////
////  independent of target memory.                               ////
////                                                              ////
////  Supported ASIC RAMs are:                                    ////
////  - Artisan Single-Port Sync RAM                              ////
////  - Avant! Two-Port Sync RAM (*)                              ////
////  - Virage Single-Port Sync RAM                               ////
////  - Virtual Silicon Single-Port Sync RAM                      ////
////                                                              ////
////  Supported FPGA RAMs are:                                    ////
////  - Xilinx Virtex RAMB4_S16                                   ////
////  - Altera LPM                                                ////
////                                                              ////
////  To Do:                                                      ////
////   - xilinx rams need external tri-state logic                ////
////   - fix avant! two-port ram                                  ////
////   - add additional RAMs                                      ////
////                                                              ////
////  Author(s):                                                  ////
////      - Damjan Lampret, lampret@opencores.org                 ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
// Revision 1.3  2003/04/07 01:19:07  lampret
// Added Altera LPM RAMs. Changed generic RAM output when OE inactive.
//
// Revision 1.2  2002/10/17 20:04:40  lampret
// Added BIST scan. Special VS RAMs need to be used to implement BIST.
//
// Revision 1.1  2002/01/03 08:16:15  lampret
// New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs.
//
// Revision 1.10  2001/11/27 21:24:04  lampret
// Changed instantiation name of VS RAMs.
//
// Revision 1.9  2001/11/27 19:45:04  lampret
// Fixed VS RAM instantiation - again.
//
// Revision 1.8  2001/11/23 21:42:31  simons
// Program counter divided to PPC and NPC.
//
// Revision 1.6  2001/10/21 17:57:16  lampret
// Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF.
//
// Revision 1.5  2001/10/14 13:12:09  lampret
// MP3 version.
//
// Revision 1.1.1.1  2001/10/06 10:18:36  igorm
// no message
//
// Revision 1.1  2001/08/09 13:39:33  lampret
// Major clean-up.
//
// Revision 1.2  2001/07/30 05:38:02  lampret
// Adding empty directories required by HDL coding guidelines
//
//
 
// synopsys translate_off
`include "timescale.v"
// synopsys translate_on
`include "or1200_defines.v"
 
module or1200_spram_256x21(
`ifdef OR1200_BIST
	// RAM BIST
	scanb_rst, scanb_si, scanb_so, scanb_en, scanb_clk,
`endif
	// Generic synchronous single-port RAM interface
	clk, rst, ce, we, oe, addr, di, do
);
 
//
// Default address and data buses width
//
parameter aw = 8;
parameter dw = 21;
 
`ifdef OR1200_BIST
//
// RAM BIST
//
input			scanb_rst,
			scanb_si,
			scanb_en,
			scanb_clk;
output			scanb_so;
`endif
 
//
// Generic synchronous single-port RAM interface
//
input			clk;	// Clock
input			rst;	// Reset
input			ce;	// Chip enable input
input			we;	// Write enable input
input			oe;	// Output enable input
input 	[aw-1:0]	addr;	// address bus inputs
input	[dw-1:0]	di;	// input data bus
output	[dw-1:0]	do;	// output data bus
 
//
// Internal wires and registers
//
wire	[10:0]		unconnected;
 
`ifdef OR1200_BIST
assign scanb_so = scanb_si;
`endif
 
`ifdef OR1200_ARTISAN_SSP
 
//
// Instantiation of ASIC memory:
//
// Artisan Synchronous Single-Port RAM (ra1sh)
//
`ifdef UNUSED
art_hssp_256x21 #(dw, 1<<aw, aw) artisan_ssp(
`else
`ifdef OR1200_BIST
art_hssp_256x21_bist artisan_ssp(
`else
art_hssp_256x21 artisan_ssp(
`endif
`endif
`ifdef OR1200_BIST
	// RAM BIST
	.scanb_rst(scanb_rst),
	.scanb_si(scanb_si),
	.scanb_so(scanb_so),
	.scanb_en(scanb_en),
	.scanb_clk(scanb_clk),
`endif
	.CLK(clk),
	.CEN(~ce),
	.WEN(~we),
	.A(addr),
	.D(di),
	.OEN(~oe),
	.Q(do)
);
 
`else
 
`ifdef OR1200_AVANT_ATP
 
//
// Instantiation of ASIC memory:
//
// Avant! Asynchronous Two-Port RAM
//
avant_atp avant_atp(
	.web(~we),
	.reb(),
	.oeb(~oe),
	.rcsb(),
	.wcsb(),
	.ra(addr),
	.wa(addr),
	.di(di),
	.do(do)
);
 
`else
 
`ifdef OR1200_VIRAGE_SSP
 
//
// Instantiation of ASIC memory:
//
// Virage Synchronous 1-port R/W RAM
//
virage_ssp virage_ssp(
	.clk(clk),
	.adr(addr),
	.d(di),
	.we(we),
	.oe(oe),
	.me(ce),
	.q(do)
);
 
`else
 
`ifdef OR1200_VIRTUALSILICON_SSP
 
//
// Instantiation of ASIC memory:
//
// Virtual Silicon Single-Port Synchronous SRAM
//
`ifdef UNUSED
vs_hdsp_256x21 #(1<<aw, aw-1, dw-1) vs_ssp(
`else
`ifdef OR1200_BIST
vs_hdsp_256x21_bist vs_ssp(
`else
vs_hdsp_256x21 vs_ssp(
`endif
`endif
`ifdef OR1200_BIST
	// RAM BIST
	.scanb_rst(scanb_rst),
	.scanb_si(scanb_si),
	.scanb_so(scanb_so),
	.scanb_en(scanb_en),
	.scanb_clk(scanb_clk),
`endif
	.CK(clk),
	.ADR(addr),
	.DI(di),
	.WEN(~we),
	.CEN(~ce),
	.OEN(~oe),
	.DOUT(do)
);
 
`else
 
`ifdef OR1200_XILINX_RAMB4
 
//
// Instantiation of FPGA memory:
//
// Virtex/Spartan2
//
 
//
// Block 0
//
RAMB4_S16 ramb4_s16_0(
	.CLK(clk),
	.RST(rst),
	.ADDR(addr),
	.DI(di[15:0]),
	.EN(ce),
	.WE(we),
	.DO(do[15:0])
);
 
//
// Block 1
//
RAMB4_S16 ramb4_s16_1(
	.CLK(clk),
	.RST(rst),
	.ADDR(addr),
	.DI({11'b00000000000, di[20:16]}),
	.EN(ce),
	.WE(we),
	.DO({unconnected, do[20:16]})
);
 
`else
 
`ifdef OR1200_ALTERA_LPM
 
//
// Instantiation of FPGA memory:
//
// Altera LPM
//
// Added By Jamil Khatib
//
 
wire    wr;
 
assign  wr = ce & we;
 
initial $display("Using Altera LPM.");
 
lpm_ram_dq lpm_ram_dq_component (
        .address(addr),
        .inclock(clk),
        .outclock(clk),
        .data(di),
        .we(wr),
        .q(do)
);
 
defparam lpm_ram_dq_component.lpm_width = dw,
        lpm_ram_dq_component.lpm_widthad = aw,
        lpm_ram_dq_component.lpm_indata = "REGISTERED",
        lpm_ram_dq_component.lpm_address_control = "REGISTERED",
        lpm_ram_dq_component.lpm_outdata = "UNREGISTERED",
        lpm_ram_dq_component.lpm_hint = "USE_EAB=ON";
        // examplar attribute lpm_ram_dq_component NOOPT TRUE
 
`else
 
//
// Generic single-port synchronous RAM model
//
 
//
// Generic RAM's registers and wires
//
reg	[dw-1:0]	mem [(1<<aw)-1:0];	// RAM content
reg	[dw-1:0]	do_reg;			// RAM data output register
 
//
// Data output drivers
//
assign do = (oe) ? do_reg : {dw{1'b0}};
 
//
// RAM read and write
//
always @(posedge clk)
	if (ce && !we)
		do_reg <= #1 mem[addr];
	else if (ce && we)
		mem[addr] <= #1 di;
 
`endif	// !OR1200_ALTERA_LPM
`endif	// !OR1200_XILINX_RAMB4_S16
`endif	// !OR1200_VIRTUALSILICON_SSP
`endif	// !OR1200_VIRAGE_SSP
`endif  // !OR1200_AVANT_ATP
`endif	// !OR1200_ARTISAN_SSP
 
endmodule