Subversion Repositories or1k

//////////////////////////////////////////////////////////////////////
////                                                              ////
////  OR1200's Top level multiplier and MAC                       ////
////                                                              ////
////  This file is part of the OpenRISC 1200 project              ////
////  http://www.opencores.org/cores/or1k/                        ////
////                                                              ////
////  Description                                                 ////
////  Multiplier is 32x32 however multiply instructions only      ////
////  use lower 32 bits of the result. MAC is 32x32=64+64.        ////
////                                                              ////
////  To Do:                                                      ////
////   - make it smaller and faster                               ////
////                                                              ////
////  Author(s):                                                  ////
////      - Damjan Lampret, lampret@opencores.org                 ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
// Revision 1.1  2002/01/03 08:16:15  lampret
// New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs.
//
// Revision 1.3  2001/10/21 17:57:16  lampret
// Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF.
//
// Revision 1.2  2001/10/14 13:12:09  lampret
// MP3 version.
//
// Revision 1.1.1.1  2001/10/06 10:18:38  igorm
// no message
//
//
 
// synopsys translate_off
`include "timescale.v"
// synopsys translate_on
`include "or1200_defines.v"
 
module or1200_mult_mac(
	// Clock and reset
	clk, rst,
 
	// Multiplier/MAC interface
	ex_freeze, id_macrc_op, macrc_op, a, b, mac_op, alu_op, result, mac_stall_r,
 
	// SPR interface
	spr_cs, spr_write, spr_addr, spr_dat_i, spr_dat_o
);
 
parameter width = `OR1200_OPERAND_WIDTH;
 
//
// I/O
//
 
//
// Clock and reset
//
input				clk;
input				rst;
 
//
// Multiplier/MAC interface
//
input				ex_freeze;
input				id_macrc_op;
input				macrc_op;
input	[width-1:0]		a;
input	[width-1:0]		b;
input	[`OR1200_MACOP_WIDTH-1:0]	mac_op;
input	[`OR1200_ALUOP_WIDTH-1:0]	alu_op;
output	[width-1:0]		result;
output				mac_stall_r;
 
//
// SPR interface
//
input				spr_cs;
input				spr_write;
input	[31:0]			spr_addr;
input	[31:0]			spr_dat_i;
output	[31:0]			spr_dat_o;
 
//
// Internal wires and regs
//
wire	[width-1:0]		result;
reg	[2*width-1:0]		mul_prod_r;
reg	[2*width-1:0]		mac_r;
wire	[2*width-1:0]		mul_prod;
wire	[`OR1200_MACOP_WIDTH-1:0]	mac_op;
reg	[`OR1200_MACOP_WIDTH-1:0]	mac_op_r1;
reg	[`OR1200_MACOP_WIDTH-1:0]	mac_op_r2;
reg	[`OR1200_MACOP_WIDTH-1:0]	mac_op_r3;
reg				mac_stall_r;
wire	[width-1:0]		x;
wire	[width-1:0]		y;
wire				spr_maclo_we;
wire				spr_machi_we;
 
//
// Combinatorial logic
//
assign result = (alu_op == `OR1200_ALUOP_MUL) ? mul_prod_r[31:0] : mac_r[59:28];
assign spr_maclo_we = spr_cs & spr_write & spr_addr[`OR1200_MAC_ADDR];
assign spr_machi_we = spr_cs & spr_write & !spr_addr[`OR1200_MAC_ADDR];
assign spr_dat_o = spr_addr[`OR1200_MAC_ADDR] ? mac_r[31:0] : mac_r[63:32];
`ifdef OR1200_LOWPWR_MULT
assign x = (alu_op == `OR1200_ALUOP_MUL) | (|mac_op) ? a : 32'h0000_0000;
assign y = (alu_op == `OR1200_ALUOP_MUL) | (|mac_op) ? b : 32'h0000_0000;
`else
assign x = a;
assign y = b;
`endif
 
//
// Instantiation of the multiplier
//
`ifdef OR1200_ASIC_MULTP2_32X32
or1200_amultp2_32x32 or1200_amultp2_32x32(
	.X(x),
	.Y(y),
	.RST(rst),
	.CLK(clk),
	.P(mul_prod)
);
`else
or1200_gmultp2_32x32 or1200_gmultp2_32x32(
	.X(x),
	.Y(y),
	.RST(rst),
	.CLK(clk),
	.P(mul_prod)
);
`endif
 
//
// Registered output from the multiplier
//
always @(posedge rst or posedge clk)
	if (rst)
		mul_prod_r <= #1 64'h0000_0000_0000_0000;
	else
		mul_prod_r <= #1 mul_prod[63:0];
 
//
// Propagation of l.mac opcode
//
always @(posedge clk or posedge rst)
	if (rst)
		mac_op_r1 <= #1 `OR1200_MACOP_WIDTH'b0;
	else
		mac_op_r1 <= #1 mac_op;
 
//
// Propagation of l.mac opcode
//
always @(posedge clk or posedge rst)
	if (rst)
		mac_op_r2 <= #1 `OR1200_MACOP_WIDTH'b0;
	else
		mac_op_r2 <= #1 mac_op_r1;
 
//
// Propagation of l.mac opcode
//
always @(posedge clk or posedge rst)
	if (rst)
		mac_op_r3 <= #1 `OR1200_MACOP_WIDTH'b0;
	else
		mac_op_r3 <= #1 mac_op_r2;
 
//
// Implementation of MAC
//
always @(posedge rst or posedge clk)
	if (rst)
		mac_r <= #1 64'h0000_0000_0000_0000;
`ifdef OR1200_MAC_SPR_WE
	else if (spr_maclo_we)
		mac_r[31:0] <= #1 spr_dat_i;
	else if (spr_machi_we)
		mac_r[63:32] <= #1 spr_dat_i;
`endif
	else if (mac_op_r3 == `OR1200_MACOP_MAC)
		mac_r <= #1 mac_r + mul_prod_r;
	else if (mac_op_r3 == `OR1200_MACOP_MSB)
		mac_r <= #1 mac_r - mul_prod_r;
	else if (macrc_op & !ex_freeze)
		mac_r <= #1 64'h0000_0000_0000_0000;
 
//
// Stall CPU if l.macrc is in ID and MAC still has to process l.mac instructions
// in EX stage (e.g. inside multiplier)
//
always @(posedge rst or posedge clk)
	if (rst)
		mac_stall_r <= #1 1'b0;
	else
		mac_stall_r <= #1 (|mac_op | (|mac_op_r1) | (|mac_op_r2)) & id_macrc_op;
 
endmodule