OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [Documentation/] [filesystems/] [affs.txt] - Rev 1777

Go to most recent revision | Compare with Previous | Blame | View Log

Amiga filesystems Overview
==========================

Not all varieties of the Amiga filesystems are supported for reading and
writing. The Amiga currently knows 6 different filesystems:

DOS\0           The old or original filesystem, not really suited for
                hard disks and normally not used on them, either.
                Supported read/write.

DOS\1           The original Fast File System. Supported read/write.

DOS\2           The old "international" filesystem. International means that
                a bug has been fixed so that accented ("international") letters
                in file names are case-insensitive, as they ought to be.
                Supported read/write.

DOS\3           The "international" Fast File System.  Supported read/write.

DOS\4           The original filesystem with directory cache. The directory
                cache speeds up directory accesses on floppies considerably,
                but slows down file creation/deletion. Doesn't make much
                sense on hard disks. Supported read only.

DOS\5           The Fast File System with directory cache. Supported read only.

All of the above filesystems allow block sizes from 512 to 32K bytes.
Supported block sizes are: 512, 1024, 2048 and 4096 bytes. Larger blocks
speed up almost everything with the expense of wasted disk space. The speed
gain above 4K seems not really worth the price, so you don't lose too
much here, either.

The muFS (multi user File System) equivalents of the above file systems
are supported, too.

Mount options for the AFFS
==========================

protect         If this option is set, the protection bits cannot be altered.

uid[=uid]       This sets the uid of the root directory (i. e. the mount point
                to uid or to the uid of the current user, if the =uid is
                omitted.

gid[=gid]       Same as above, but for gid.

setuid[=uid]    This sets the owner of all files and directories in the file
                system to uid or the uid of the current user, respectively.

setgid[=gid]    Same as above, but for gid.

mode=mode       Sets the mode flags to the given (octal) value, regardless
                of the original permissions. Directories will get an x
                permission, if the corresponding r bit is set.
                This is useful since most of the plain AmigaOS files
                will map to 600.

reserved=num    Sets the number of reserved blocks at the start of the
                partition to num. Default is 2.

root=block      Sets the block number of the root block. This should never
                be necessary.

bs=blksize      Sets the blocksize to blksize. Valid block sizes are 512,
                1024, 2048 and 4096. Like the root option, this should
                never be necessary, as the affs can figure it out itself.

quiet           The file system will not return an error for disallowed
                mode changes.

verbose         The volume name, file system type and block size will
                be written to the syslog.

prefix=path     Path will be prefixed to every absolute path name of
                symbolic links on an AFFS partition. Default = /

volume=name     When symbolic links with an absolute path are created
                on an AFFS partition, volume will be prepended as the
                volume name. Default = "" (empty string).

Handling of the Users/Groups and protection flags
=================================================

Amiga -> Linux:

The Amiga protection flags RWEDRWEDHSPARWED are handled as follows:

  - R maps to r for user, group and others. On directories, R implies x.

  - If both W and D are allowed, w will be set.

  - If both R and S are set, x will be set.

  - H, P and E are always retained and ignored under Linux.

  - A is always reset when written.

User id and group id will be used unless set[gu]id are given as mount
options. Since most of the Amiga file systems are single user systems
they will be owned by root.

Linux -> Amiga:

The Linux rwxrwxrwx file mode is handled as follows:

  - r permission will set R for user, group and others.

  - w permission will set W and D for user, group and others.

  - x permission of the user will set S for plain files.

  - All other flags (suid, sgid, ...) are ignored and will
    not be retained.
    
Newly created files and directories will get the user and group id
of the current user and a mode according to the umask.

Symbolic links
==============

Although the Amiga and Linux file systems resemble each other, there
are some, not always subtle, differences. One of them becomes apparent
with symbolic links. While Linux has a file system with exactly one
root directory, the Amiga has a separate root directory for each
file system (i. e. partition, floppy disk, ...). With the Amiga,
these entities are called "volumes". They have symbolic names which
can be used to access them. Thus, symbolic links can point to a
different volume. AFFS turns the volume name into a directory name
and prepends the prefix path (see prefix option) to it.

Example:
You mount all your Amiga partitions under /amiga/<volume> (where
<volume> is the name of the volume), and you give the option
"prefix=/amiga/" when mounting all your AFFS partitions. (They
might be "User", "WB" and "Graphics", the mount points /amiga/User,
/amiga/WB and /amiga/Graphics). A symbolic link referring to
"User:sc/include/dos/dos.h" will be followed to
"/amiga/User/sc/include/dos/dos.h".

Examples
========

Command line
    mount  Archive/Amiga/Workbench3.1.adf /mnt -t affs -o loop,reserved=4
    mount  /dev/sda3 /Amiga -t affs

/etc/fstab example
    /dev/sdb5   /d/f    affs    ro

Bugs, Restrictions, Caveats
===========================

Quite a few things may not work as advertised. Not everything is
tested, though several hundred MB have been read and written using
this fs.

Filenames are truncated to 30 characters without warning.

Currently there are no checks against invalid characters (':')
in filenames.

Case is ignored by the affs in filename matching, but Linux shells
do care about the case. Example (with /mnt being an affs mounted fs):
    rm /mnt/WRONGCASE
will remove /mnt/wrongcase, but
    rm /mnt/WR*
will not since the names are matched by the shell.

The block allocation is designed for hard disk partitions. If more
than 1 process writes to a (small) diskette, the blocks are allocated
in an ugly way (but the real AFFS doesn't do much better). This
is also true when space gets tight.

The bitmap valid flag in the root block may not be accurate when the
system crashes while an affs partition is mounted. There's currently
no way to fix this without an Amiga (disk validator) or manually
(who would do this?). Maybe later.

A fsck.affs and mkfs.affs will probably be available in the future.
Until then, you should do
    ln -s /bin/true /etc/fs/mkfs.affs

It's not possible to read floppy disks with a normal PC or workstation
due to an incompatibility with the Amiga floppy controller.

If you are interested in an Amiga Emulator for Linux, look at

http://www-users.informatik.rwth-aachen.de/~crux/uae.html

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.