Subversion Repositories or1k

/*
 * Code common to all APECS chips.
 *
 * Rewritten for Apecs from the lca.c from:
 *
 * Written by David Mosberger (davidm@cs.arizona.edu) with some code
 * taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit
 * bios code.
 */
#include <linux/kernel.h>
#include <linux/config.h>
#include <linux/types.h>
#include <linux/bios32.h>
#include <linux/pci.h>
 
#include <asm/system.h>
#include <asm/io.h>
#include <asm/hwrpb.h>
#include <asm/ptrace.h>
 
extern struct hwrpb_struct *hwrpb;
extern asmlinkage void wrmces(unsigned long mces);
 
/*
 * BIOS32-style PCI interface:
 */
 
#ifdef CONFIG_ALPHA_APECS
 
#ifdef DEBUG
# define DBG(args)	printk args
#else
# define DBG(args)
#endif
 
#define vuip	volatile unsigned int  *
 
static volatile unsigned int apecs_mcheck_expected = 0;
static volatile unsigned int apecs_mcheck_taken = 0;
static unsigned int apecs_jd, apecs_jd1, apecs_jd2;
 
#ifdef CONFIG_ALPHA_SRM_SETUP
unsigned int APECS_DMA_WIN_BASE = APECS_DMA_WIN_BASE_DEFAULT;
unsigned int APECS_DMA_WIN_SIZE = APECS_DMA_WIN_SIZE_DEFAULT;
#endif /* SRM_SETUP */
 
/*
 * Given a bus, device, and function number, compute resulting
 * configuration space address and setup the APECS_HAXR2 register
 * accordingly.  It is therefore not safe to have concurrent
 * invocations to configuration space access routines, but there
 * really shouldn't be any need for this.
 *
 * Type 0:
 *
 *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
 *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0|
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 *
 *	31:11	Device select bit.
 * 	10:8	Function number
 * 	 7:2	Register number
 *
 * Type 1:
 *
 *  3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 
 *  3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1|
 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 *
 *	31:24	reserved
 *	23:16	bus number (8 bits = 128 possible buses)
 *	15:11	Device number (5 bits)
 *	10:8	function number
 *	 7:2	register number
 *  
 * Notes:
 *	The function number selects which function of a multi-function device 
 *	(e.g., scsi and ethernet).
 * 
 *	The register selects a DWORD (32 bit) register offset.  Hence it
 *	doesn't get shifted by 2 bits as we want to "drop" the bottom two
 *	bits.
 */
static int mk_conf_addr(unsigned char bus, unsigned char device_fn,
			unsigned char where, unsigned long *pci_addr,
			unsigned char *type1)
{
	unsigned long addr;
 
	DBG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, pci_addr=0x%p, type1=0x%p)\n",
	     bus, device_fn, where, pci_addr, type1));
 
	if (bus == 0) {
		int device = device_fn >> 3;
 
		/* type 0 configuration cycle: */
 
		if (device > 20) {
			DBG(("mk_conf_addr: device (%d) > 20, returning -1\n", device));
			return -1;
		}
 
		*type1 = 0;
		addr = (device_fn << 8) | (where);
	} else {
		/* type 1 configuration cycle: */
		*type1 = 1;
		addr = (bus << 16) | (device_fn << 8) | (where);
	}
	*pci_addr = addr;
	DBG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr));
	return 0;
}
 
 
static unsigned int conf_read(unsigned long addr, unsigned char type1)
{
	unsigned long flags;
	unsigned int stat0, value;
	unsigned int haxr2 = 0; /* to keep gcc quiet */
 
#ifdef CONFIG_ALPHA_SRM
	/* some SRMs step on these registers during a machine check: */
	register long s0 asm ("9");
	register long s1 asm ("10");
	register long s2 asm ("11");
	register long s3 asm ("12");
	register long s4 asm ("13");
	register long s5 asm ("14");
	asm volatile ("# %0" : "r="(s0));
	asm volatile ("# %0" : "r="(s1));
	asm volatile ("# %0" : "r="(s2));
	asm volatile ("# %0" : "r="(s3));
	asm volatile ("# %0" : "r="(s4));
	asm volatile ("# %0" : "r="(s5));
#endif
 
	save_flags(flags);	/* avoid getting hit by machine check */
	cli();
 
	DBG(("conf_read(addr=0x%lx, type1=%d)\n", addr, type1));
 
	/* reset status register to avoid losing errors: */
	stat0 = *((vuip)APECS_IOC_DCSR);
	*((vuip)APECS_IOC_DCSR) = stat0;
	mb();
	DBG(("conf_read: APECS DCSR was 0x%x\n", stat0));
	/* if Type1 access, must set HAE #2 */
	if (type1) {
		haxr2 = *((vuip)APECS_IOC_HAXR2);
		mb();
		*((vuip)APECS_IOC_HAXR2) = haxr2 | 1;
		DBG(("conf_read: TYPE1 access\n"));
	}
 
	draina();
	apecs_mcheck_expected = 1;
	apecs_mcheck_taken = 0;
	mb();
	/* access configuration space: */
	value = *((vuip)addr);
	mb();
	mb();
	if (apecs_mcheck_taken) {
		apecs_mcheck_taken = 0;
		value = 0xffffffffU;
		mb();
	}
	apecs_mcheck_expected = 0;
	mb();
	/*
	 * david.rusling@reo.mts.dec.com.  This code is needed for the
	 * EB64+ as it does not generate a machine check (why I don't
	 * know).  When we build kernels for one particular platform
	 * then we can make this conditional on the type.
	 */
#if 1
	draina();
 
	/* now look for any errors */
	stat0 = *((vuip)APECS_IOC_DCSR);
	DBG(("conf_read: APECS DCSR after read 0x%x\n", stat0));
	if (stat0 & 0xffe0U) { /* is any error bit set? */
		/* if not NDEV, print status */
		if (!(stat0 & 0x0800)) {
			printk("apecs.c:conf_read: got stat0=%x\n", stat0);
		}
 
		/* reset error status: */
		*((vuip)APECS_IOC_DCSR) = stat0;
		mb();
		wrmces(0x7);			/* reset machine check */
		value = 0xffffffff;
	}
#endif
 
	/* if Type1 access, must reset HAE #2 so normal IO space ops work */
	if (type1) {
		*((vuip)APECS_IOC_HAXR2) = haxr2 & ~1;
		mb();
	}
	restore_flags(flags);
#ifdef CONFIG_ALPHA_SRM
	/* some SRMs step on these registers during a machine check: */
	asm volatile ("# %0" :: "r"(s0));
	asm volatile ("# %0" :: "r"(s1));
	asm volatile ("# %0" :: "r"(s2));
	asm volatile ("# %0" :: "r"(s3));
	asm volatile ("# %0" :: "r"(s4));
	asm volatile ("# %0" :: "r"(s5));
#endif
	return value;
}
 
 
static void conf_write(unsigned long addr, unsigned int value, unsigned char type1)
{
	unsigned long flags;
	unsigned int stat0;
	unsigned int haxr2 = 0; /* to keep gcc quiet */
 
	save_flags(flags);	/* avoid getting hit by machine check */
	cli();
 
	/* reset status register to avoid losing errors: */
	stat0 = *((vuip)APECS_IOC_DCSR);
	*((vuip)APECS_IOC_DCSR) = stat0;
	mb();
 
	/* if Type1 access, must set HAE #2 */
	if (type1) {
		haxr2 = *((vuip)APECS_IOC_HAXR2);
		mb();
		*((vuip)APECS_IOC_HAXR2) = haxr2 | 1;
	}
 
	draina();
	apecs_mcheck_expected = 1;
	mb();
	/* access configuration space: */
	*((vuip)addr) = value;
	mb();
	mb();
	apecs_mcheck_expected = 0;
	mb();
	/*
	 * david.rusling@reo.mts.dec.com.  This code is needed for the
	 * EB64+ as it does not generate a machine check (why I don't
	 * know).  When we build kernels for one particular platform
	 * then we can make this conditional on the type.
	 */
#if 1
	draina();
 
	/* now look for any errors */
	stat0 = *((vuip)APECS_IOC_DCSR);
	if (stat0 & 0xffe0U) { /* is any error bit set? */
		/* if not NDEV, print status */
		if (!(stat0 & 0x0800)) {
			printk("apecs.c:conf_write: got stat0=%x\n", stat0);
		}
 
		/* reset error status: */
		*((vuip)APECS_IOC_DCSR) = stat0;
		mb();
		wrmces(0x7);			/* reset machine check */
	}
#endif
 
	/* if Type1 access, must reset HAE #2 so normal IO space ops work */
	if (type1) {
		*((vuip)APECS_IOC_HAXR2) = haxr2 & ~1;
		mb();
	}
	restore_flags(flags);
}
 
 
int pcibios_read_config_byte (unsigned char bus, unsigned char device_fn,
			      unsigned char where, unsigned char *value)
{
	unsigned long addr = APECS_CONF;
	unsigned long pci_addr;
	unsigned char type1;
 
	*value = 0xff;
 
	if (mk_conf_addr(bus, device_fn, where, &pci_addr, &type1) < 0) {
		return PCIBIOS_SUCCESSFUL;
	}
 
	addr |= (pci_addr << 5) + 0x00;
 
	*value = conf_read(addr, type1) >> ((where & 3) * 8);
 
	return PCIBIOS_SUCCESSFUL;
}
 
 
int pcibios_read_config_word (unsigned char bus, unsigned char device_fn,
			      unsigned char where, unsigned short *value)
{
	unsigned long addr = APECS_CONF;
	unsigned long pci_addr;
	unsigned char type1;
 
	*value = 0xffff;
 
	if (where & 0x1) {
		return PCIBIOS_BAD_REGISTER_NUMBER;
	}
 
	if (mk_conf_addr(bus, device_fn, where, &pci_addr, &type1)) {
		return PCIBIOS_SUCCESSFUL;
	}
 
	addr |= (pci_addr << 5) + 0x08;
 
	*value = conf_read(addr, type1) >> ((where & 3) * 8);
	return PCIBIOS_SUCCESSFUL;
}
 
 
int pcibios_read_config_dword (unsigned char bus, unsigned char device_fn,
			       unsigned char where, unsigned int *value)
{
	unsigned long addr = APECS_CONF;
	unsigned long pci_addr;
	unsigned char type1;
 
	*value = 0xffffffff;
	if (where & 0x3) {
		return PCIBIOS_BAD_REGISTER_NUMBER;
	}
 
	if (mk_conf_addr(bus, device_fn, where, &pci_addr, &type1)) {
		return PCIBIOS_SUCCESSFUL;
	}
	addr |= (pci_addr << 5) + 0x18;
	*value = conf_read(addr, type1);
	return PCIBIOS_SUCCESSFUL;
}
 
 
int pcibios_write_config_byte (unsigned char bus, unsigned char device_fn,
			       unsigned char where, unsigned char value)
{
	unsigned long addr = APECS_CONF;
	unsigned long pci_addr;
	unsigned char type1;
 
	if (mk_conf_addr(bus, device_fn, where, &pci_addr, &type1) < 0) {
		return PCIBIOS_SUCCESSFUL;
	}
	addr |= (pci_addr << 5) + 0x00;
	conf_write(addr, value << ((where & 3) * 8), type1);
	return PCIBIOS_SUCCESSFUL;
}
 
 
int pcibios_write_config_word (unsigned char bus, unsigned char device_fn,
			       unsigned char where, unsigned short value)
{
	unsigned long addr = APECS_CONF;
	unsigned long pci_addr;
	unsigned char type1;
 
	if (mk_conf_addr(bus, device_fn, where, &pci_addr, &type1) < 0) {
		return PCIBIOS_SUCCESSFUL;
	}
	addr |= (pci_addr << 5) + 0x08;
	conf_write(addr, value << ((where & 3) * 8), type1);
	return PCIBIOS_SUCCESSFUL;
}
 
 
int pcibios_write_config_dword (unsigned char bus, unsigned char device_fn,
				unsigned char where, unsigned int value)
{
	unsigned long addr = APECS_CONF;
	unsigned long pci_addr;
	unsigned char type1;
 
	if (mk_conf_addr(bus, device_fn, where, &pci_addr, &type1) < 0) {
		return PCIBIOS_SUCCESSFUL;
	}
	addr |= (pci_addr << 5) + 0x18;
	conf_write(addr, value << ((where & 3) * 8), type1);
	return PCIBIOS_SUCCESSFUL;
}
 
 
unsigned long apecs_init(unsigned long mem_start, unsigned long mem_end)
{
 
#ifdef CONFIG_ALPHA_XL
	/*
	 * Set up the PCI->physical memory translation windows.
	 * For the XL we *must* use both windows, in order to
	 * maximize the amount of physical memory that can be used
	 * to DMA from the ISA bus, and still allow PCI bus devices
	 * access to all of host memory.
	 *
	 * see <asm/apecs.h> for window bases and sizes.
	 *
	 * this restriction due to the true XL motherboards' 82379AB SIO
	 * PCI<->ISA bridge chip which passes only 27 bits of address...
	 */
 
	*(vuip)APECS_IOC_PB1R = 1U<<19 | (APECS_XL_DMA_WIN1_BASE & 0xfff00000U);
	*(vuip)APECS_IOC_PM1R = (APECS_XL_DMA_WIN1_SIZE - 1) & 0xfff00000U;
	*(vuip)APECS_IOC_TB1R = 0;
 
	*(vuip)APECS_IOC_PB2R = 1U<<19 | (APECS_XL_DMA_WIN2_BASE & 0xfff00000U);
	*(vuip)APECS_IOC_PM2R = (APECS_XL_DMA_WIN2_SIZE - 1) & 0xfff00000U;
	*(vuip)APECS_IOC_TB2R = 0;
 
#else  /* CONFIG_ALPHA_XL */
#ifdef CONFIG_ALPHA_SRM_SETUP
	/* check window 1 for enabled and mapped to 0 */
	if ((*(vuip)APECS_IOC_PB1R & (1U<<19)) && (*(vuip)APECS_IOC_TB1R == 0))
	{
	  APECS_DMA_WIN_BASE = *(vuip)APECS_IOC_PB1R & 0xfff00000U;
	  APECS_DMA_WIN_SIZE = *(vuip)APECS_IOC_PM1R & 0xfff00000U;
	  APECS_DMA_WIN_SIZE += 0x00100000U;
#if 0
	  printk("apecs_init: using Window 1 settings\n");
	  printk("apecs_init: PB1R 0x%x PM1R 0x%x TB1R 0x%x\n",
     		 *(vuip)APECS_IOC_PB1R,
		 *(vuip)APECS_IOC_PM1R,
		 *(vuip)APECS_IOC_TB1R);
#endif
     	}
	else	/* check window 2 for enabled and mapped to 0 */
	if ((*(vuip)APECS_IOC_PB2R & (1U<<19)) && (*(vuip)APECS_IOC_TB2R == 0))
	{
	  APECS_DMA_WIN_BASE = *(vuip)APECS_IOC_PB2R & 0xfff00000U;
	  APECS_DMA_WIN_SIZE = *(vuip)APECS_IOC_PM2R & 0xfff00000U;
	  APECS_DMA_WIN_SIZE += 0x00100000U;
#if 0
     	  printk("apecs_init: using Window 2 settings\n");
	  printk("apecs_init: PB2R 0x%x PM2R 0x%x TB2R 0x%x\n",
		 *(vuip)APECS_IOC_PB2R,
		 *(vuip)APECS_IOC_PM2R,
		 *(vuip)APECS_IOC_TB2R);
#endif
     	}
	else /* we must use our defaults... */
#endif /* SRM_SETUP */
	{
	/*
	 * Set up the PCI->physical memory translation windows.
	 * For now, window 2 is disabled.  In the future, we may
	 * want to use it to do scatter/gather DMA.  Window 1
	 * goes at 1 GB and is 1 GB large.
	 */
	*(vuip)APECS_IOC_PB2R  = 0U; /* disable window 2 */
 
	*(vuip)APECS_IOC_PB1R  = 1U<<19 | (APECS_DMA_WIN_BASE & 0xfff00000U);
	*(vuip)APECS_IOC_PM1R  = (APECS_DMA_WIN_SIZE - 1) & 0xfff00000U;
	*(vuip)APECS_IOC_TB1R  = 0;
	}
#endif /* CONFIG_ALPHA_XL */
 
#ifdef CONFIG_ALPHA_CABRIOLET
#if 0
	/*
	 * JAE: HACK!!! for now, hardwire if configured...
	 * davidm: Older miniloader versions don't set the clockfrequency
	 * right, so hardcode it for now.
	 */
	if (hwrpb->sys_type == ST_DEC_EB64P) {
		hwrpb->sys_type = ST_DEC_EBPC64;
	}
	if (hwrpb->cycle_freq == 0) {
	    hwrpb->cycle_freq = 275000000;
	}
 
	/* update checksum: */
	{
	    unsigned long *l, sum;
 
	    sum = 0;
	    for (l = (unsigned long *) hwrpb;
		 l < (unsigned long *) &hwrpb->chksum;
		 ++l)
	      sum += *l;
	    hwrpb->chksum = sum;
	}
#endif
#endif /* CONFIG_ALPHA_CABRIOLET */
 
       /*
        * Finally, clear the HAXR2 register, which gets used
        *  for PCI Config Space accesses. That is the way
        *  we want to use it, and we do not want to depend on
        *  what ARC or SRM might have left behind...
        */
       {
#if 0
         unsigned int haxr2 = *((vuip)APECS_IOC_HAXR2); mb();
         if (haxr2) printk("apecs_init: HAXR2 was 0x%x\n", haxr2);
#endif
         *((vuip)APECS_IOC_HAXR2) = 0; mb();
       }
 
 
	return mem_start;
}
 
int apecs_pci_clr_err(void)
{
	apecs_jd = *((vuip)APECS_IOC_DCSR);
	if (apecs_jd & 0xffe0L) {
		apecs_jd1 = *((vuip)APECS_IOC_SEAR);
		*((vuip)APECS_IOC_DCSR) = apecs_jd | 0xffe1L;
		apecs_jd = *((vuip)APECS_IOC_DCSR);
		mb();
	}
	*((vuip)APECS_IOC_TBIA) = APECS_IOC_TBIA;
	apecs_jd2 = *((vuip)APECS_IOC_TBIA);
	mb();
	return 0;
}
 
void apecs_machine_check(unsigned long vector, unsigned long la_ptr,
			 struct pt_regs * regs)
{
	struct el_common *mchk_header;
	struct el_procdata *mchk_procdata;
	struct el_apecs_sysdata_mcheck *mchk_sysdata;
	unsigned long *ptr;
	int i;
 
 
	mchk_header = (struct el_common *)la_ptr;
	mchk_procdata = (struct el_procdata *)
	  (la_ptr + mchk_header->proc_offset - sizeof(mchk_procdata->paltemp));
	mchk_sysdata = 
	  (struct el_apecs_sysdata_mcheck *)(la_ptr + mchk_header->sys_offset);
 
#ifdef DEBUG
	printk("apecs_machine_check: vector=0x%lx la_ptr=0x%lx\n",
	       vector, la_ptr);
	printk("        pc=0x%lx size=0x%x procoffset=0x%x sysoffset 0x%x\n",
	       regs->pc, mchk_header->size, mchk_header->proc_offset,
	       mchk_header->sys_offset);
	printk("apecs_machine_check: expected %d DCSR 0x%lx PEAR 0x%lx\n",
	       apecs_mcheck_expected, mchk_sysdata->epic_dcsr,
	       mchk_sysdata->epic_pear);
	ptr = (unsigned long *)la_ptr;
	for (i = 0; i < mchk_header->size / sizeof(long); i += 2) {
		printk(" +%lx %lx %lx\n", i*sizeof(long), ptr[i], ptr[i+1]);
	}
#endif /* DEBUG */
 
	/*
	 * Check if machine check is due to a badaddr() and if so,
	 * ignore the machine check.
	 */
#ifdef CONFIG_ALPHA_MIKASA
#define MCHK_NO_DEVSEL 0x205L
#define MCHK_NO_TABT 0x204L
	if (apecs_mcheck_expected &&
	    (((unsigned int)mchk_header->code == MCHK_NO_DEVSEL) ||
	     ((unsigned int)mchk_header->code == MCHK_NO_TABT))
	    )
	{
#else
	if (apecs_mcheck_expected && (mchk_sysdata->epic_dcsr && 0x0c00UL)) {
#endif
		apecs_mcheck_expected = 0;
		apecs_mcheck_taken = 1;
		mb();
		mb();
		apecs_pci_clr_err();
		wrmces(0x7);
		mb();
		draina();
		DBG(("apecs_machine_check: EXPECTED\n"));
	}
	else if (vector == 0x620 || vector == 0x630) {
		wrmces(0x1f); /* disable correctable from now on */
		mb();
		draina();
		printk("apecs_machine_check: HW correctable (0x%lx)\n", vector);
	}
	else {
		printk(KERN_CRIT "APECS machine check:\n");
		printk(KERN_CRIT "  vector=0x%lx la_ptr=0x%lx\n",
		       vector, la_ptr);
		printk(KERN_CRIT
		       "  pc=0x%lx size=0x%x procoffset=0x%x sysoffset 0x%x\n",
		       regs->pc, mchk_header->size, mchk_header->proc_offset,
		       mchk_header->sys_offset);
		printk(KERN_CRIT "  expected %d DCSR 0x%lx PEAR 0x%lx\n",
		       apecs_mcheck_expected, mchk_sysdata->epic_dcsr,
		       mchk_sysdata->epic_pear);
 
		ptr = (unsigned long *)la_ptr;
		for (i = 0; i < mchk_header->size / sizeof(long); i += 2) {
		    printk(KERN_CRIT " +%lx %lx %lx\n",
			   i*sizeof(long), ptr[i], ptr[i+1]);
		}
#if 0
		/* doesn't work with MILO */
		show_regs(regs);
#endif
	}
}
#endif /* CONFIG_ALPHA_APECS */