URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [arch/] [alpha/] [kernel/] [pyxis.c] - Rev 1765
Compare with Previous | Blame | View Log
/* * Code common to all PYXIS chips. * * Based on code written by David A Rusling (david.rusling@reo.mts.dec.com). * */ #include <linux/kernel.h> #include <linux/config.h> #include <linux/types.h> #include <linux/bios32.h> #include <linux/pci.h> #include <linux/sched.h> #include <asm/system.h> #include <asm/io.h> #include <asm/hwrpb.h> #include <asm/ptrace.h> #include <asm/mmu_context.h> extern struct hwrpb_struct *hwrpb; extern asmlinkage void wrmces(unsigned long mces); /* * BIOS32-style PCI interface: */ #ifdef CONFIG_ALPHA_PYXIS #ifdef DEBUG # define DBG(args) printk args #else # define DBG(args) #endif #define DEBUG_MCHECK #ifdef DEBUG_MCHECK # define DBG_MCK(args) printk args /* #define DEBUG_MCHECK_DUMP */ #else # define DBG_MCK(args) #endif #define vuip volatile unsigned int * #define vulp volatile unsigned long * static volatile unsigned int PYXIS_mcheck_expected = 0; static volatile unsigned int PYXIS_mcheck_taken = 0; static unsigned int PYXIS_jd; #ifdef CONFIG_ALPHA_SRM_SETUP unsigned int PYXIS_DMA_WIN_BASE = PYXIS_DMA_WIN_BASE_DEFAULT; unsigned int PYXIS_DMA_WIN_SIZE = PYXIS_DMA_WIN_SIZE_DEFAULT; unsigned long pyxis_sm_base_r1, pyxis_sm_base_r2, pyxis_sm_base_r3; #endif /* SRM_SETUP */ /* * Given a bus, device, and function number, compute resulting * configuration space address and setup the PYXIS_HAXR2 register * accordingly. It is therefore not safe to have concurrent * invocations to configuration space access routines, but there * really shouldn't be any need for this. * * Type 0: * * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0| * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * * 31:11 Device select bit. * 10:8 Function number * 7:2 Register number * * Type 1: * * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1| * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * * 31:24 reserved * 23:16 bus number (8 bits = 128 possible buses) * 15:11 Device number (5 bits) * 10:8 function number * 7:2 register number * * Notes: * The function number selects which function of a multi-function device * (e.g., scsi and ethernet). * * The register selects a DWORD (32 bit) register offset. Hence it * doesn't get shifted by 2 bits as we want to "drop" the bottom two * bits. */ static int mk_conf_addr(unsigned char bus, unsigned char device_fn, unsigned char where, unsigned long *pci_addr, unsigned char *type1) { unsigned long addr; DBG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, pci_addr=0x%p, type1=0x%p)\n", bus, device_fn, where, pci_addr, type1)); if (bus == 0) { int device; device = device_fn >> 3; /* type 0 configuration cycle: */ #if NOT_NOW if (device > 20) { DBG(("mk_conf_addr: device (%d) > 20, returning -1\n", device)); return -1; } #endif *type1 = 0; addr = (device_fn << 8) | (where); } else { /* type 1 configuration cycle: */ *type1 = 1; addr = (bus << 16) | (device_fn << 8) | (where); } *pci_addr = addr; DBG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr)); return 0; } static unsigned int conf_read(unsigned long addr, unsigned char type1) { unsigned long flags; unsigned int stat0, value, temp; unsigned int pyxis_cfg = 0; /* to keep gcc quiet */ save_flags(flags); /* avoid getting hit by machine check */ cli(); DBG(("conf_read(addr=0x%lx, type1=%d)\n", addr, type1)); /* reset status register to avoid losing errors: */ stat0 = *((vuip)PYXIS_ERR); *((vuip)PYXIS_ERR) = stat0; mb(); temp = *((vuip)PYXIS_ERR); DBG(("conf_read: PYXIS ERR was 0x%x\n", stat0)); /* if Type1 access, must set PYXIS CFG */ if (type1) { pyxis_cfg = *((vuip)PYXIS_CFG); *((vuip)PYXIS_CFG) = pyxis_cfg | 1; mb(); temp = *((vuip)PYXIS_CFG); DBG(("conf_read: TYPE1 access\n")); } mb(); draina(); PYXIS_mcheck_expected = 1; PYXIS_mcheck_taken = 0; mb(); /* access configuration space: */ value = *((vuip)addr); mb(); mb(); if (PYXIS_mcheck_taken) { PYXIS_mcheck_taken = 0; value = 0xffffffffU; mb(); } PYXIS_mcheck_expected = 0; mb(); /* if Type1 access, must reset IOC CFG so normal IO space ops work */ if (type1) { *((vuip)PYXIS_CFG) = pyxis_cfg & ~1; mb(); temp = *((vuip)PYXIS_CFG); } DBG(("conf_read(): finished\n")); restore_flags(flags); return value; } static void conf_write(unsigned long addr, unsigned int value, unsigned char type1) { unsigned long flags; unsigned int stat0, temp; unsigned int pyxis_cfg = 0; /* to keep gcc quiet */ save_flags(flags); /* avoid getting hit by machine check */ cli(); /* reset status register to avoid losing errors: */ stat0 = *((vuip)PYXIS_ERR); *((vuip)PYXIS_ERR) = stat0; mb(); temp = *((vuip)PYXIS_ERR); DBG(("conf_write: PYXIS ERR was 0x%x\n", stat0)); /* if Type1 access, must set PYXIS CFG */ if (type1) { pyxis_cfg = *((vuip)PYXIS_CFG); *((vuip)PYXIS_CFG) = pyxis_cfg | 1; mb(); temp = *((vuip)PYXIS_CFG); DBG(("conf_read: TYPE1 access\n")); } draina(); PYXIS_mcheck_expected = 1; mb(); /* access configuration space: */ *((vuip)addr) = value; mb(); mb(); temp = *((vuip)PYXIS_ERR); /* do a PYXIS read to force the write */ PYXIS_mcheck_expected = 0; mb(); /* if Type1 access, must reset IOC CFG so normal IO space ops work */ if (type1) { *((vuip)PYXIS_CFG) = pyxis_cfg & ~1; mb(); temp = *((vuip)PYXIS_CFG); } DBG(("conf_write(): finished\n")); restore_flags(flags); } int pcibios_read_config_byte (unsigned char bus, unsigned char device_fn, unsigned char where, unsigned char *value) { unsigned long addr = PYXIS_CONF; unsigned long pci_addr; unsigned char type1; *value = 0xff; if (mk_conf_addr(bus, device_fn, where, &pci_addr, &type1) < 0) { return PCIBIOS_SUCCESSFUL; } addr |= (pci_addr << 5) + 0x00; *value = conf_read(addr, type1) >> ((where & 3) * 8); return PCIBIOS_SUCCESSFUL; } int pcibios_read_config_word (unsigned char bus, unsigned char device_fn, unsigned char where, unsigned short *value) { unsigned long addr = PYXIS_CONF; unsigned long pci_addr; unsigned char type1; *value = 0xffff; if (where & 0x1) { return PCIBIOS_BAD_REGISTER_NUMBER; } if (mk_conf_addr(bus, device_fn, where, &pci_addr, &type1)) { return PCIBIOS_SUCCESSFUL; } addr |= (pci_addr << 5) + 0x08; *value = conf_read(addr, type1) >> ((where & 3) * 8); return PCIBIOS_SUCCESSFUL; } int pcibios_read_config_dword (unsigned char bus, unsigned char device_fn, unsigned char where, unsigned int *value) { unsigned long addr = PYXIS_CONF; unsigned long pci_addr; unsigned char type1; *value = 0xffffffff; if (where & 0x3) { return PCIBIOS_BAD_REGISTER_NUMBER; } if (mk_conf_addr(bus, device_fn, where, &pci_addr, &type1)) { return PCIBIOS_SUCCESSFUL; } addr |= (pci_addr << 5) + 0x18; *value = conf_read(addr, type1); return PCIBIOS_SUCCESSFUL; } int pcibios_write_config_byte (unsigned char bus, unsigned char device_fn, unsigned char where, unsigned char value) { unsigned long addr = PYXIS_CONF; unsigned long pci_addr; unsigned char type1; if (mk_conf_addr(bus, device_fn, where, &pci_addr, &type1) < 0) { return PCIBIOS_SUCCESSFUL; } addr |= (pci_addr << 5) + 0x00; conf_write(addr, value << ((where & 3) * 8), type1); return PCIBIOS_SUCCESSFUL; } int pcibios_write_config_word (unsigned char bus, unsigned char device_fn, unsigned char where, unsigned short value) { unsigned long addr = PYXIS_CONF; unsigned long pci_addr; unsigned char type1; if (mk_conf_addr(bus, device_fn, where, &pci_addr, &type1) < 0) { return PCIBIOS_SUCCESSFUL; } addr |= (pci_addr << 5) + 0x08; conf_write(addr, value << ((where & 3) * 8), type1); return PCIBIOS_SUCCESSFUL; } int pcibios_write_config_dword (unsigned char bus, unsigned char device_fn, unsigned char where, unsigned int value) { unsigned long addr = PYXIS_CONF; unsigned long pci_addr; unsigned char type1; if (mk_conf_addr(bus, device_fn, where, &pci_addr, &type1) < 0) { return PCIBIOS_SUCCESSFUL; } addr |= (pci_addr << 5) + 0x18; conf_write(addr, value << ((where & 3) * 8), type1); return PCIBIOS_SUCCESSFUL; } unsigned long pyxis_init(unsigned long mem_start, unsigned long mem_end) { unsigned int pyxis_err; #if 0 printk("pyxis_init: PYXIS_ERR_MASK 0x%x\n", *(vuip)PYXIS_ERR_MASK); printk("pyxis_init: PYXIS_ERR 0x%x\n", *(vuip)PYXIS_ERR); printk("pyxis_init: PYXIS_INT_REQ 0x%lx\n", *(vulp)PYXIS_INT_REQ); printk("pyxis_init: PYXIS_INT_MASK 0x%lx\n", *(vulp)PYXIS_INT_MASK); printk("pyxis_init: PYXIS_INT_ROUTE 0x%lx\n", *(vulp)PYXIS_INT_ROUTE); printk("pyxis_init: PYXIS_INT_HILO 0x%lx\n", *(vulp)PYXIS_INT_HILO); printk("pyxis_init: PYXIS_INT_CNFG 0x%x\n", *(vuip)PYXIS_INT_CNFG); printk("pyxis_init: PYXIS_RT_COUNT 0x%lx\n", *(vulp)PYXIS_RT_COUNT); #endif #if 0 printk("pyxis_init: W0 BASE 0x%x MASK 0x%x TRANS 0x%x\n", *(vuip)PYXIS_W0_BASE, *(vuip)PYXIS_W0_MASK, *(vuip)PYXIS_T0_BASE); printk("pyxis_init: W1 BASE 0x%x MASK 0x%x TRANS 0x%x\n", *(vuip)PYXIS_W1_BASE, *(vuip)PYXIS_W1_MASK, *(vuip)PYXIS_T1_BASE); printk("pyxis_init: W2 BASE 0x%x MASK 0x%x TRANS 0x%x\n", *(vuip)PYXIS_W2_BASE, *(vuip)PYXIS_W2_MASK, *(vuip)PYXIS_T2_BASE); printk("pyxis_init: W3 BASE 0x%x MASK 0x%x TRANS 0x%x\n", *(vuip)PYXIS_W3_BASE, *(vuip)PYXIS_W3_MASK, *(vuip)PYXIS_T3_BASE); #endif /* * Set up error reporting. Make sure CPU_PE is OFF in the mask. */ pyxis_err = *(vuip)PYXIS_ERR_MASK; pyxis_err &= ~4; *(vuip)PYXIS_ERR_MASK = pyxis_err; mb(); pyxis_err = *(vuip)PYXIS_ERR_MASK; pyxis_err = *(vuip)PYXIS_ERR ; pyxis_err |= 0x180; /* master/target abort */ *(vuip)PYXIS_ERR = pyxis_err ; mb() ; pyxis_err = *(vuip)PYXIS_ERR ; #ifdef CONFIG_ALPHA_SRM_SETUP /* check window 0 for enabled and mapped to 0 */ if (((*(vuip)PYXIS_W0_BASE & 3) == 1) && (*(vuip)PYXIS_T0_BASE == 0) && ((*(vuip)PYXIS_W0_MASK & 0xfff00000U) > 0x0ff00000U)) { PYXIS_DMA_WIN_BASE = *(vuip)PYXIS_W0_BASE & 0xfff00000U; PYXIS_DMA_WIN_SIZE = *(vuip)PYXIS_W0_MASK & 0xfff00000U; PYXIS_DMA_WIN_SIZE += 0x00100000U; #if 1 printk("pyxis_init: using Window 0 settings\n"); printk("pyxis_init: BASE 0x%x MASK 0x%x TRANS 0x%x\n", *(vuip)PYXIS_W0_BASE, *(vuip)PYXIS_W0_MASK, *(vuip)PYXIS_T0_BASE); #endif } else /* check window 1 for enabled and mapped to 0 */ if (((*(vuip)PYXIS_W1_BASE & 3) == 1) && (*(vuip)PYXIS_T1_BASE == 0) && ((*(vuip)PYXIS_W1_MASK & 0xfff00000U) > 0x0ff00000U)) { PYXIS_DMA_WIN_BASE = *(vuip)PYXIS_W1_BASE & 0xfff00000U; PYXIS_DMA_WIN_SIZE = *(vuip)PYXIS_W1_MASK & 0xfff00000U; PYXIS_DMA_WIN_SIZE += 0x00100000U; #if 1 printk("pyxis_init: using Window 1 settings\n"); printk("pyxis_init: BASE 0x%x MASK 0x%x TRANS 0x%x\n", *(vuip)PYXIS_W1_BASE, *(vuip)PYXIS_W1_MASK, *(vuip)PYXIS_T1_BASE); #endif } else /* check window 2 for enabled and mapped to 0 */ if (((*(vuip)PYXIS_W2_BASE & 3) == 1) && (*(vuip)PYXIS_T2_BASE == 0) && ((*(vuip)PYXIS_W2_MASK & 0xfff00000U) > 0x0ff00000U)) { PYXIS_DMA_WIN_BASE = *(vuip)PYXIS_W2_BASE & 0xfff00000U; PYXIS_DMA_WIN_SIZE = *(vuip)PYXIS_W2_MASK & 0xfff00000U; PYXIS_DMA_WIN_SIZE += 0x00100000U; #if 1 printk("pyxis_init: using Window 2 settings\n"); printk("pyxis_init: BASE 0x%x MASK 0x%x TRANS 0x%x\n", *(vuip)PYXIS_W2_BASE, *(vuip)PYXIS_W2_MASK, *(vuip)PYXIS_T2_BASE); #endif } else /* check window 3 for enabled and mapped to 0 */ if (((*(vuip)PYXIS_W3_BASE & 3) == 1) && (*(vuip)PYXIS_T3_BASE == 0) && ((*(vuip)PYXIS_W3_MASK & 0xfff00000U) > 0x0ff00000U)) { PYXIS_DMA_WIN_BASE = *(vuip)PYXIS_W3_BASE & 0xfff00000U; PYXIS_DMA_WIN_SIZE = *(vuip)PYXIS_W3_MASK & 0xfff00000U; PYXIS_DMA_WIN_SIZE += 0x00100000U; #if 1 printk("pyxis_init: using Window 3 settings\n"); printk("pyxis_init: BASE 0x%x MASK 0x%x TRANS 0x%x\n", *(vuip)PYXIS_W3_BASE, *(vuip)PYXIS_W3_MASK, *(vuip)PYXIS_T3_BASE); #endif } else /* we must use our defaults which were pre-initialized... */ #endif /* SRM_SETUP */ { #if defined(CONFIG_ALPHA_RUFFIAN) #if 1 printk("pyxis_init: skipping window register rewrites... " "trust DeskStation firmware!\n"); #endif #else /* RUFFIAN */ /* * Set up the PCI->physical memory translation windows. * For now, windows 1,2 and 3 are disabled. In the future, we may * want to use them to do scatter/gather DMA. Window 0 * goes at 1 GB and is 1 GB large. */ *(vuip)PYXIS_W0_BASE = 1U | (PYXIS_DMA_WIN_BASE & 0xfff00000U); *(vuip)PYXIS_W0_MASK = (PYXIS_DMA_WIN_SIZE - 1) & 0xfff00000U; *(vuip)PYXIS_T0_BASE = 0; *(vuip)PYXIS_W1_BASE = 0x0 ; *(vuip)PYXIS_W2_BASE = 0x0 ; *(vuip)PYXIS_W3_BASE = 0x0 ; mb(); #endif /* RUFFIAN */ } /* * check ASN in HWRPB for validity, report if bad */ if (hwrpb->max_asn != MAX_ASN) { printk("PYXIS_init: max ASN from HWRPB is bad (0x%lx)\n", hwrpb->max_asn); hwrpb->max_asn = MAX_ASN; } /* * Next, clear the PYXIS_CFG register, which gets used * for PCI Config Space accesses. That is the way * we want to use it, and we do not want to depend on * what ARC or SRM might have left behind... */ { unsigned int pyxis_cfg, temp; pyxis_cfg = *((vuip)PYXIS_CFG); mb(); if (pyxis_cfg != 0) { #if 1 printk("PYXIS_init: CFG was 0x%x\n", pyxis_cfg); #endif *((vuip)PYXIS_CFG) = 0; mb(); temp = *((vuip)PYXIS_CFG); } } { unsigned int pyxis_hae_mem = *((vuip)PYXIS_HAE_MEM); unsigned int pyxis_hae_io = *((vuip)PYXIS_HAE_IO); #if 0 printk("PYXIS_init: HAE_MEM was 0x%x\n", pyxis_hae_mem); printk("PYXIS_init: HAE_IO was 0x%x\n", pyxis_hae_io); #endif #ifdef CONFIG_ALPHA_SRM_SETUP /* sigh... For the SRM setup, unless we know apriori what the HAE contents will be, we need to setup the arbitrary region bases so we can test against the range of addresses and tailor the region chosen for the SPARSE memory access. see include/asm-alpha/pyxis.h for the SPARSE mem read/write */ pyxis_sm_base_r1 = (pyxis_hae_mem ) & 0xe0000000UL;/* region 1 */ pyxis_sm_base_r2 = (pyxis_hae_mem << 16) & 0xf8000000UL;/* region 2 */ pyxis_sm_base_r3 = (pyxis_hae_mem << 24) & 0xfc000000UL;/* region 3 */ #else /* SRM_SETUP */ *((vuip)PYXIS_HAE_MEM) = 0U; mb(); pyxis_hae_mem = *((vuip)PYXIS_HAE_MEM); *((vuip)PYXIS_HAE_IO) = 0; mb(); pyxis_hae_io = *((vuip)PYXIS_HAE_IO); #endif /* SRM_SETUP */ } /* * Finally, check that the PYXIS_CTRL1 has IOA_BEN set for * enabling byte/word PCI bus space(s) access. */ { unsigned int ctrl1; ctrl1 = *((vuip) PYXIS_CTRL1); if (!(ctrl1 & 1)) { #if 0 printk("PYXIS_init: enabling byte/word PCI space\n"); #endif *((vuip) PYXIS_CTRL1) = ctrl1 | 1; mb(); ctrl1 = *((vuip)PYXIS_CTRL1); } } return mem_start; } int pyxis_pci_clr_err(void) { PYXIS_jd = *((vuip)PYXIS_ERR); DBG(("PYXIS_pci_clr_err: PYXIS ERR after read 0x%x\n", PYXIS_jd)); *((vuip)PYXIS_ERR) = 0x0180; mb(); PYXIS_jd = *((vuip)PYXIS_ERR); return 0; } void pyxis_machine_check(unsigned long vector, unsigned long la_ptr, struct pt_regs * regs) { #if 0 printk("PYXIS machine check ignored\n") ; #else struct el_common *mchk_header; struct el_PYXIS_sysdata_mcheck *mchk_sysdata; mchk_header = (struct el_common *)la_ptr; mchk_sysdata = (struct el_PYXIS_sysdata_mcheck *)(la_ptr + mchk_header->sys_offset); #if 0 DBG_MCK(("pyxis_machine_check: vector=0x%lx la_ptr=0x%lx\n", vector, la_ptr)); DBG_MCK(("\t\t pc=0x%lx size=0x%x procoffset=0x%x sysoffset 0x%x\n", regs->pc, mchk_header->size, mchk_header->proc_offset, mchk_header->sys_offset)); DBG_MCK(("pyxis_machine_check: expected %d DCSR 0x%lx PEAR 0x%lx\n", PYXIS_mcheck_expected, mchk_sysdata->epic_dcsr, mchk_sysdata->epic_pear)); #endif #ifdef DEBUG_MCHECK_DUMP { unsigned long *ptr; int i; ptr = (unsigned long *)la_ptr; for (i = 0; i < mchk_header->size / sizeof(long); i += 2) { printk(" +%lx %lx %lx\n", i*sizeof(long), ptr[i], ptr[i+1]); } } #endif /* DEBUG_MCHECK_DUMP */ /* * Check if machine check is due to a badaddr() and if so, * ignore the machine check. */ mb(); mb(); if (PYXIS_mcheck_expected/* && (mchk_sysdata->epic_dcsr && 0x0c00UL)*/) { DBG(("PYXIS machine check expected\n")); PYXIS_mcheck_expected = 0; PYXIS_mcheck_taken = 1; mb(); mb(); draina(); pyxis_pci_clr_err(); wrmces(0x7); mb(); } #if 1 else { printk("PYXIS machine check NOT expected\n") ; DBG_MCK(("pyxis_machine_check: vector=0x%lx la_ptr=0x%lx\n", vector, la_ptr)); DBG_MCK(("\t\t pc=0x%lx size=0x%x procoffset=0x%x sysoffset 0x%x\n", regs->pc, mchk_header->size, mchk_header->proc_offset, mchk_header->sys_offset)); PYXIS_mcheck_expected = 0; PYXIS_mcheck_taken = 1; mb(); mb(); draina(); pyxis_pci_clr_err(); wrmces(0x7); mb(); } #endif #endif } #if defined(CONFIG_ALPHA_RUFFIAN) /* NOTE: this is only used by MILO, AFAIK... */ /* * The DeskStation Ruffian motherboard firmware does not place * the memory size in the PALimpure area. Therefore, it uses * the Bank Configuration Registers in PYXIS to obtain the size. */ unsigned long pyxis_get_bank_size(unsigned long offset) { unsigned long bank_addr; /* valid offsets are: 0x800, 0x840 and 0x880 * since Ruffian only uses three banks */ bank_addr = (unsigned long)PYXIS_MCR + offset; /* check BANK_ENABLE */ if (*((unsigned long *)bank_addr) && 0x01) { /* do case on BANK_SIZE bits */ switch (*((unsigned long *)bank_addr) & 0x01e) { case 0x00: return 0x40000000UL; break; /* 1G */ case 0x02: return 0x20000000UL; break; /* 512M */ case 0x04: return 0x10000000UL; break; /* 256M */ case 0x06: return 0x08000000UL; break; /* 128M */ case 0x08: return 0x04000000UL; break; /* 64M */ case 0x0a: return 0x02000000UL; break; /* 32M */ case 0x0c: return 0x01000000UL; break; /* 16M */ case 0x0e: return 0x00800000UL; break; /* 8M */ case 0x10: return 0x80000000UL; break; /* 2G */ default : return 0x00000000UL; break; /* ERROR*/ } } else return 0x00UL; } #endif /* CONFIG_ALPHA_RUFFIAN */ #endif /* CONFIG_ALPHA_PYXIS */