URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [arch/] [alpha/] [kernel/] [time.c] - Rev 1622
Go to most recent revision | Compare with Previous | Blame | View Log
/* * linux/arch/alpha/kernel/time.c * * Copyright (C) 1991, 1992, 1995 Linus Torvalds * * This file contains the PC-specific time handling details: * reading the RTC at bootup, etc.. * 1994-07-02 Alan Modra * fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime * 1995-03-26 Markus Kuhn * fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887 * precision CMOS clock update */ #include <linux/errno.h> #include <linux/sched.h> #include <linux/kernel.h> #include <linux/param.h> #include <linux/string.h> #include <linux/mm.h> #include <asm/segment.h> #include <asm/io.h> #include <asm/hwrpb.h> #include <linux/mc146818rtc.h> #include <linux/timex.h> #define TIMER_IRQ 0 extern struct hwrpb_struct *hwrpb; static int set_rtc_mmss(unsigned long); /* * Shift amount by which scaled_ticks_per_cycle is scaled. Shifting * by 48 gives us 16 bits for HZ while keeping the accuracy good even * for large CPU clock rates. */ #define FIX_SHIFT 48 /* lump static variables together for more efficient access: */ static struct { __u32 last_time; /* cycle counter last time it got invoked */ __u32 max_cycles_per_tick; /* more makes us think we lost an interrupt */ unsigned long scaled_ticks_per_cycle; /* ticks/cycle * 2^48 */ long last_rtc_update; /* last time the cmos clock got updated */ } state; static inline __u32 rpcc(void) { __u32 result; asm volatile ("rpcc %0" : "r="(result)); return result; } /* * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ void timer_interrupt(struct pt_regs * regs) { __u32 delta, now; now = rpcc(); delta = now - state.last_time; state.last_time = now; if (delta > state.max_cycles_per_tick) { int i, missed_ticks; missed_ticks = ((delta * state.scaled_ticks_per_cycle) >> FIX_SHIFT) - 1; for (i = 0; i < missed_ticks; ++i) { do_timer(regs); } } do_timer(regs); /* * If we have an externally synchronized Linux clock, then update * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ if (time_state != TIME_BAD && xtime.tv_sec > state.last_rtc_update + 660 && xtime.tv_usec > 500000 - (tick >> 1) && xtime.tv_usec < 500000 + (tick >> 1)) if (set_rtc_mmss(xtime.tv_sec) == 0) state.last_rtc_update = xtime.tv_sec; else state.last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */ } /* Converts Gregorian date to seconds since 1970-01-01 00:00:00. * Assumes input in normal date format, i.e. 1980-12-31 23:59:59 * => year=1980, mon=12, day=31, hour=23, min=59, sec=59. * * [For the Julian calendar (which was used in Russia before 1917, * Britain & colonies before 1752, anywhere else before 1582, * and is still in use by some communities) leave out the * -year/100+year/400 terms, and add 10.] * * This algorithm was first published by Gauss (I think). * * WARNING: this function will overflow on 2106-02-07 06:28:16 on * machines were long is 32-bit! (However, as time_t is signed, we * will already get problems at other places on 2038-01-19 03:14:08) */ static inline unsigned long mktime(unsigned int year, unsigned int mon, unsigned int day, unsigned int hour, unsigned int min, unsigned int sec) { if (0 >= (int) (mon -= 2)) { /* 1..12 -> 11,12,1..10 */ mon += 12; /* Puts Feb last since it has leap day */ year -= 1; } return ((( (unsigned long)(year/4 - year/100 + year/400 + 367*mon/12 + day) + year*365 - 719499 )*24 + hour /* now have hours */ )*60 + min /* now have minutes */ )*60 + sec; /* finally seconds */ } void time_init(void) { unsigned int year, mon, day, hour, min, sec; int i; /* The Linux interpretation of the CMOS clock register contents: * When the Update-In-Progress (UIP) flag goes from 1 to 0, the * RTC registers show the second which has precisely just started. * Let's hope other operating systems interpret the RTC the same way. */ /* read RTC exactly on falling edge of update flag */ for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */ if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP) break; for (i = 0 ; i < 1000000 ; i++) /* must try at least 2.228 ms */ if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)) break; do { /* Isn't this overkill ? UIP above should guarantee consistency */ sec = CMOS_READ(RTC_SECONDS); min = CMOS_READ(RTC_MINUTES); hour = CMOS_READ(RTC_HOURS); day = CMOS_READ(RTC_DAY_OF_MONTH); mon = CMOS_READ(RTC_MONTH); year = CMOS_READ(RTC_YEAR); } while (sec != CMOS_READ(RTC_SECONDS)); if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { BCD_TO_BIN(sec); BCD_TO_BIN(min); BCD_TO_BIN(hour); BCD_TO_BIN(day); BCD_TO_BIN(mon); BCD_TO_BIN(year); } #ifdef ALPHA_PRE_V1_2_SRM_CONSOLE /* * The meaning of life, the universe, and everything. Plus * this makes the year come out right on SRM consoles earlier * than v1.2. */ year -= 42; #endif if ((year += 1900) < 1970) year += 100; xtime.tv_sec = mktime(year, mon, day, hour, min, sec); xtime.tv_usec = 0; if (HZ > (1<<16)) { extern void __you_loose (void); __you_loose(); } state.last_time = rpcc(); state.scaled_ticks_per_cycle = ((unsigned long) HZ << FIX_SHIFT) / hwrpb->cycle_freq; state.max_cycles_per_tick = (2 * hwrpb->cycle_freq) / HZ; state.last_rtc_update = 0; } /* * We could get better timer accuracy by using the alpha * time counters or something. Now this is limited to * the HZ clock frequency. */ void do_gettimeofday(struct timeval *tv) { unsigned long flags; save_flags(flags); cli(); *tv = xtime; restore_flags(flags); } void do_settimeofday(struct timeval *tv) { cli(); xtime = *tv; time_state = TIME_BAD; time_maxerror = 0x70000000; time_esterror = 0x70000000; sti(); } /* * In order to set the CMOS clock precisely, set_rtc_mmss has to be * called 500 ms after the second nowtime has started, because when * nowtime is written into the registers of the CMOS clock, it will * jump to the next second precisely 500 ms later. Check the Motorola * MC146818A or Dallas DS12887 data sheet for details. */ static int set_rtc_mmss(unsigned long nowtime) { int retval = 0; int real_seconds, real_minutes, cmos_minutes; unsigned char save_control, save_freq_select; save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */ CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */ CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); cmos_minutes = CMOS_READ(RTC_MINUTES); if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) BCD_TO_BIN(cmos_minutes); /* * since we're only adjusting minutes and seconds, * don't interfere with hour overflow. This avoids * messing with unknown time zones but requires your * RTC not to be off by more than 15 minutes */ real_seconds = nowtime % 60; real_minutes = nowtime / 60; if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) real_minutes += 30; /* correct for half hour time zone */ real_minutes %= 60; if (abs(real_minutes - cmos_minutes) < 30) { if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { BIN_TO_BCD(real_seconds); BIN_TO_BCD(real_minutes); } CMOS_WRITE(real_seconds,RTC_SECONDS); CMOS_WRITE(real_minutes,RTC_MINUTES); } else retval = -1; /* The following flags have to be released exactly in this order, * otherwise the DS12887 (popular MC146818A clone with integrated * battery and quartz) will not reset the oscillator and will not * update precisely 500 ms later. You won't find this mentioned in * the Dallas Semiconductor data sheets, but who believes data * sheets anyway ... -- Markus Kuhn */ CMOS_WRITE(save_control, RTC_CONTROL); CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); return retval; }
Go to most recent revision | Compare with Previous | Blame | View Log