OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [arch/] [alpha/] [kernel/] [time.c] - Rev 1765

Compare with Previous | Blame | View Log

/*
 *  linux/arch/alpha/kernel/time.c
 *
 *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
 *
 * This file contains the PC-specific time handling details:
 * reading the RTC at bootup, etc..
 * 1994-07-02    Alan Modra
 *	fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime
 * 1995-03-26    Markus Kuhn
 *      fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887
 *      precision CMOS clock update
 */
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
 
#include <asm/segment.h>
#include <asm/io.h>
#include <asm/hwrpb.h>
 
#include <linux/mc146818rtc.h>
#include <linux/timex.h>
 
#define TIMER_IRQ 0
 
extern struct hwrpb_struct *hwrpb;
 
static int set_rtc_mmss(unsigned long);
 
 
/*
 * Shift amount by which scaled_ticks_per_cycle is scaled.  Shifting
 * by 48 gives us 16 bits for HZ while keeping the accuracy good even
 * for large CPU clock rates.
 */
#define FIX_SHIFT	48
 
/* lump static variables together for more efficient access: */
static struct {
	__u32		last_time;		/* cycle counter last time it got invoked */
	__u32		max_cycles_per_tick;	/* more makes us think we lost an interrupt */
	unsigned long	scaled_ticks_per_cycle;	/* ticks/cycle * 2^48 */
	long		last_rtc_update;	/* last time the cmos clock got updated */
} state;
 
 
static inline __u32 rpcc(void)
{
    __u32 result;
 
    asm volatile ("rpcc %0" : "r="(result));
    return result;
}
 
 
/*
 * timer_interrupt() needs to keep up the real-time clock,
 * as well as call the "do_timer()" routine every clocktick
 */
void timer_interrupt(struct pt_regs * regs)
{
	__u32 delta, now;
 
	now = rpcc();
	delta = now - state.last_time;
	state.last_time = now;
	if (delta > state.max_cycles_per_tick) {
		int i, missed_ticks;
 
		missed_ticks = ((delta * state.scaled_ticks_per_cycle) >> FIX_SHIFT) - 1;
		for (i = 0; i < missed_ticks; ++i) {
			do_timer(regs);
		}
	}
	do_timer(regs);
 
	/*
	 * If we have an externally synchronized Linux clock, then update
	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
	 * called as close as possible to 500 ms before the new second starts.
	 */
	if (time_state != TIME_BAD && xtime.tv_sec > state.last_rtc_update + 660 &&
	    xtime.tv_usec > 500000 - (tick >> 1) &&
	    xtime.tv_usec < 500000 + (tick >> 1))
	  if (set_rtc_mmss(xtime.tv_sec) == 0)
	    state.last_rtc_update = xtime.tv_sec;
	  else
	    state.last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
}
 
/* Converts Gregorian date to seconds since 1970-01-01 00:00:00.
 * Assumes input in normal date format, i.e. 1980-12-31 23:59:59
 * => year=1980, mon=12, day=31, hour=23, min=59, sec=59.
 *
 * [For the Julian calendar (which was used in Russia before 1917,
 * Britain & colonies before 1752, anywhere else before 1582,
 * and is still in use by some communities) leave out the
 * -year/100+year/400 terms, and add 10.]
 *
 * This algorithm was first published by Gauss (I think).
 *
 * WARNING: this function will overflow on 2106-02-07 06:28:16 on
 * machines were long is 32-bit! (However, as time_t is signed, we
 * will already get problems at other places on 2038-01-19 03:14:08)
 */
static inline unsigned long mktime(unsigned int year, unsigned int mon,
	unsigned int day, unsigned int hour,
	unsigned int min, unsigned int sec)
{
	if (0 >= (int) (mon -= 2)) {	/* 1..12 -> 11,12,1..10 */
		mon += 12;	/* Puts Feb last since it has leap day */
		year -= 1;
	}
	return (((
	    (unsigned long)(year/4 - year/100 + year/400 + 367*mon/12 + day) +
	      year*365 - 719499
	    )*24 + hour /* now have hours */
	   )*60 + min /* now have minutes */
	  )*60 + sec; /* finally seconds */
}
 
void time_init(void)
{
	unsigned int year, mon, day, hour, min, sec;
	int i;
 
	/* The Linux interpretation of the CMOS clock register contents:
	 * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
	 * RTC registers show the second which has precisely just started.
	 * Let's hope other operating systems interpret the RTC the same way.
	 */
	/* read RTC exactly on falling edge of update flag */
	for (i = 0 ; i < 1000000 ; i++)	/* may take up to 1 second... */
		if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
			break;
	for (i = 0 ; i < 1000000 ; i++)	/* must try at least 2.228 ms */
		if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
			break;
	do { /* Isn't this overkill ? UIP above should guarantee consistency */
		sec = CMOS_READ(RTC_SECONDS);
		min = CMOS_READ(RTC_MINUTES);
		hour = CMOS_READ(RTC_HOURS);
		day = CMOS_READ(RTC_DAY_OF_MONTH);
		mon = CMOS_READ(RTC_MONTH);
		year = CMOS_READ(RTC_YEAR);
	} while (sec != CMOS_READ(RTC_SECONDS));
	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
	  {
	    BCD_TO_BIN(sec);
	    BCD_TO_BIN(min);
	    BCD_TO_BIN(hour);
	    BCD_TO_BIN(day);
	    BCD_TO_BIN(mon);
	    BCD_TO_BIN(year);
	  }
#ifdef ALPHA_PRE_V1_2_SRM_CONSOLE
	/*
	 * The meaning of life, the universe, and everything. Plus
	 * this makes the year come out right on SRM consoles earlier
	 * than v1.2.
	 */
	year -= 42;
#endif
	if ((year += 1900) < 1970)
		year += 100;
	xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
	xtime.tv_usec = 0;
 
	if (HZ > (1<<16)) {
		extern void __you_loose (void);
		__you_loose();
	}
	state.last_time = rpcc();
	state.scaled_ticks_per_cycle = ((unsigned long) HZ << FIX_SHIFT) / hwrpb->cycle_freq;
	state.max_cycles_per_tick = (2 * hwrpb->cycle_freq) / HZ;
	state.last_rtc_update = 0;
}
 
/*
 * We could get better timer accuracy by using the alpha
 * time counters or something.  Now this is limited to
 * the HZ clock frequency.
 */
void do_gettimeofday(struct timeval *tv)
{
	unsigned long flags;
 
	save_flags(flags);
	cli();
	*tv = xtime;
	restore_flags(flags);
}
 
void do_settimeofday(struct timeval *tv)
{
	cli();
	xtime = *tv;
	time_state = TIME_BAD;
	time_maxerror = 0x70000000;
	time_esterror = 0x70000000;
	sti();
}
 
 
/*
 * In order to set the CMOS clock precisely, set_rtc_mmss has to be
 * called 500 ms after the second nowtime has started, because when
 * nowtime is written into the registers of the CMOS clock, it will
 * jump to the next second precisely 500 ms later. Check the Motorola
 * MC146818A or Dallas DS12887 data sheet for details.
 */
static int set_rtc_mmss(unsigned long nowtime)
{
	int retval = 0;
	int real_seconds, real_minutes, cmos_minutes;
	unsigned char save_control, save_freq_select;
 
	save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
 
	save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
 
	cmos_minutes = CMOS_READ(RTC_MINUTES);
	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
		BCD_TO_BIN(cmos_minutes);
 
	/*
	 * since we're only adjusting minutes and seconds,
	 * don't interfere with hour overflow. This avoids
	 * messing with unknown time zones but requires your
	 * RTC not to be off by more than 15 minutes
	 */
	real_seconds = nowtime % 60;
	real_minutes = nowtime / 60;
	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
		real_minutes += 30;		/* correct for half hour time zone */
	real_minutes %= 60;
 
	if (abs(real_minutes - cmos_minutes) < 30) {
		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
			BIN_TO_BCD(real_seconds);
			BIN_TO_BCD(real_minutes);
		}
		CMOS_WRITE(real_seconds,RTC_SECONDS);
		CMOS_WRITE(real_minutes,RTC_MINUTES);
	} else
		retval = -1;
 
	/* The following flags have to be released exactly in this order,
	 * otherwise the DS12887 (popular MC146818A clone with integrated
	 * battery and quartz) will not reset the oscillator and will not
	 * update precisely 500 ms later. You won't find this mentioned in
	 * the Dallas Semiconductor data sheets, but who believes data
	 * sheets anyway ...                           -- Markus Kuhn
	 */
	CMOS_WRITE(save_control, RTC_CONTROL);
	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
 
	return retval;
}
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.