URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [arch/] [i386/] [math-emu/] [fpu_debug.c] - Rev 1765
Compare with Previous | Blame | View Log
/* Interface with ptrace and core-dumping routines */ #include "fpu_system.h" #include "exception.h" #include "reg_constant.h" #include "fpu_emu.h" #include "control_w.h" #include "status_w.h" #define EXTENDED_Ebias 0x3fff #define EXTENDED_Emin (-0x3ffe) /* smallest valid exponent */ #define DOUBLE_Emax 1023 /* largest valid exponent */ #define DOUBLE_Ebias 1023 #define DOUBLE_Emin (-1022) /* smallest valid exponent */ #define SINGLE_Emax 127 /* largest valid exponent */ #define SINGLE_Ebias 127 #define SINGLE_Emin (-126) /* smallest valid exponent */ /* Copy and paste from round_to_int. Original comments maintained */ /*===========================================================================*/ /* r gets mangled such that sig is int, sign: it is NOT normalized */ /* The return value (in eax) is zero if the result is exact, if bits are changed due to rounding, truncation, etc, then a non-zero value is returned */ /* Overflow is signalled by a non-zero return value (in eax). In the case of overflow, the returned significand always has the largest possible value */ static int round_to_int_cwd(FPU_REG *r, long int user_control_word) { char very_big; unsigned eax; if (r->tag == TW_Zero) { /* Make sure that zero is returned */ significand(r) = 0; return 0; /* o.k. */ } if (r->exp > EXP_BIAS + 63) { r->sigl = r->sigh = ~0; /* The largest representable number */ return 1; /* overflow */ } eax = shrxs(&r->sigl, EXP_BIAS + 63 - r->exp); very_big = !(~(r->sigh) | ~(r->sigl)); /* test for 0xfff...fff */ #define half_or_more (eax & 0x80000000) #define frac_part (eax) #define more_than_half ((eax & 0x80000001) == 0x80000001) switch (user_control_word & CW_RC) { case RC_RND: if ( more_than_half /* nearest */ || (half_or_more && (r->sigl & 1)) ) /* odd -> even */ { if ( very_big ) return 1; /* overflow */ significand(r) ++; return PRECISION_LOST_UP; } break; case RC_DOWN: if (frac_part && r->sign) { if ( very_big ) return 1; /* overflow */ significand(r) ++; return PRECISION_LOST_UP; } break; case RC_UP: if (frac_part && !r->sign) { if ( very_big ) return 1; /* overflow */ significand(r) ++; return PRECISION_LOST_UP; } break; case RC_CHOP: break; } return eax ? PRECISION_LOST_DOWN : 0; } /* Conver a number in the emulator format to the * hardware format. * Taken from the emulator sources, function reg_load_extended */ /* Get a long double from the debugger */ void hardreg_to_softreg(const char hardreg[10], FPU_REG *soft_reg) { unsigned long sigl, sigh, exp; sigl = *((unsigned long *) hardreg); sigh = *(1 + (unsigned long *) hardreg); exp = *(4 + (unsigned short *) hardreg); soft_reg->tag = TW_Valid; /* Default */ soft_reg->sigl = sigl; soft_reg->sigh = sigh; if (exp & 0x8000) soft_reg->sign = SIGN_NEG; else soft_reg->sign = SIGN_POS; exp &= 0x7fff; soft_reg->exp = exp - EXTENDED_Ebias + EXP_BIAS; if ( exp == 0 ) { if ( !(sigh | sigl) ) { soft_reg->tag = TW_Zero; return; } /* The number is a de-normal or pseudodenormal. */ if (sigh & 0x80000000) { /* Is a pseudodenormal. */ /* Convert it for internal use. */ /* This is non-80486 behaviour because the number loses its 'denormal' identity. */ soft_reg->exp++; return; } else { /* Is a denormal. */ /* Convert it for internal use. */ soft_reg->exp++; normalize_nuo(soft_reg); return; } } else if ( exp == 0x7fff ) { if ( !((sigh ^ 0x80000000) | sigl) ) { /* Matches the bit pattern for Infinity. */ soft_reg->exp = EXP_Infinity; soft_reg->tag = TW_Infinity; return; } soft_reg->exp = EXP_NaN; soft_reg->tag = TW_NaN; if ( !(sigh & 0x80000000) ) { /* NaNs have the ms bit set to 1. */ /* This is therefore an Unsupported NaN data type. */ /* This is non 80486 behaviour */ /* This should generate an Invalid Operand exception later, so we convert it to a SNaN */ soft_reg->sigh = 0x80000000; soft_reg->sigl = 0x00000001; soft_reg->sign = SIGN_NEG; return; } return; } if ( !(sigh & 0x80000000) ) { /* Unsupported data type. */ /* Valid numbers have the ms bit set to 1. */ /* Unnormal. */ /* Convert it for internal use. */ /* This is non-80486 behaviour */ /* This should generate an Invalid Operand exception later, so we convert it to a SNaN */ soft_reg->sigh = 0x80000000; soft_reg->sigl = 0x00000001; soft_reg->sign = SIGN_NEG; soft_reg->exp = EXP_NaN; soft_reg->tag = TW_NaN; return; } return; } /* Conver a number in the emulator format to the * hardware format. * Adapted from function write_to_extended */ void softreg_to_hardreg(const FPU_REG *rp, char d[10], long int user_control_word) { long e; FPU_REG tmp; e = rp->exp - EXP_BIAS + EXTENDED_Ebias; /* All numbers except denormals are stored internally in a format which is compatible with the extended real number format. */ if (e > 0) { *(unsigned long *) d = rp->sigl; *(unsigned long *) (d + 4) = rp->sigh; } else { /* The number is a de-normal stored as a normal using our extra exponent range, or is Zero. Convert it back to a de-normal, or leave it as Zero. */ reg_move(rp, &tmp); tmp.exp += -EXTENDED_Emin + 63; /* largest exp to be 63 */ round_to_int_cwd(&tmp, user_control_word); e = 0; *(unsigned long *) d= tmp.sigl; *(unsigned long *) (d + 4) = tmp.sigh; } e |= rp->sign == SIGN_POS ? 0 : 0x8000; *(unsigned short *) (d + 8) = e; }