Subversion Repositories or1k

|
|       x_fline.sa 3.3 1/10/91
|
|       fpsp_fline --- FPSP handler for fline exception
|
|       First determine if the exception is one of the unimplemented
|       floating point instructions.  If so, let fpsp_unimp handle it.
|       Next, determine if the instruction is an fmovecr with a non-zero
|       <ea> field.  If so, handle here and return.  Otherwise, it
|       must be a real F-line exception.
|

|               Copyright (C) Motorola, Inc. 1990
|                       All Rights Reserved
|
|       THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA 
|       The copyright notice above does not evidence any  
|       actual or intended publication of such source code.

X_FLINE:        |idnt    2,1 | Motorola 040 Floating Point Software Package

        |section        8

        .include "fpsp.h"

        |xref   real_fline
        |xref   fpsp_unimp
        |xref   uni_2
        |xref   mem_read
        |xref   fpsp_fmt_error

        .global fpsp_fline
fpsp_fline:
|
|       check for unimplemented vector first.  Use EXC_VEC-4 because
|       the equate is valid only after a 'link a6' has pushed one more
|       long onto the stack.
|
        cmpw    #UNIMP_VEC,EXC_VEC-4(%a7)
        beql    fpsp_unimp

|
|       fmovecr with non-zero <ea> handling here
|
        subl    #4,%a7          |4 accounts for 2-word difference
|                               ;between six word frame (unimp) and
|                               ;four word frame
        link    %a6,#-LOCAL_SIZE
        fsave   -(%a7)
        moveml  %d0-%d1/%a0-%a1,USER_DA(%a6)
        moveal  EXC_PC+4(%a6),%a0       |get address of fline instruction
        leal    L_SCR1(%a6),%a1 |use L_SCR1 as scratch
        movel   #4,%d0
        addl    #4,%a6          |to offset the sub.l #4,a7 above so that
|                               ;a6 can point correctly to the stack frame 
|                               ;before branching to mem_read
        bsrl    mem_read
        subl    #4,%a6
        movel   L_SCR1(%a6),%d0 |d0 contains the fline and command word
        bfextu  %d0{#4:#3},%d1  |extract coprocessor id
        cmpib   #1,%d1          |check if cpid=1
        bne     not_mvcr        |exit if not
        bfextu  %d0{#16:#6},%d1
        cmpib   #0x17,%d1               |check if it is an FMOVECR encoding
        bne     not_mvcr        
|                               ;if an FMOVECR instruction, fix stack
|                               ;and go to FPSP_UNIMP
fix_stack:
        cmpib   #VER_40,(%a7)   |test for orig unimp frame
        bnes    ck_rev
        subl    #UNIMP_40_SIZE-4,%a7 |emulate an orig fsave
        moveb   #VER_40,(%a7)
        moveb   #UNIMP_40_SIZE-4,1(%a7)
        clrw    2(%a7)
        bras    fix_con
ck_rev:
        cmpib   #VER_41,(%a7)   |test for rev unimp frame
        bnel    fpsp_fmt_error  |if not $40 or $41, exit with error
        subl    #UNIMP_41_SIZE-4,%a7 |emulate a rev fsave
        moveb   #VER_41,(%a7)
        moveb   #UNIMP_41_SIZE-4,1(%a7)
        clrw    2(%a7)
fix_con:
        movew   EXC_SR+4(%a6),EXC_SR(%a6) |move stacked sr to new position
        movel   EXC_PC+4(%a6),EXC_PC(%a6) |move stacked pc to new position
        fmovel  EXC_PC(%a6),%FPIAR |point FPIAR to fline inst
        movel   #4,%d1
        addl    %d1,EXC_PC(%a6) |increment stacked pc value to next inst
        movew   #0x202c,EXC_VEC(%a6) |reformat vector to unimp
        clrl    EXC_EA(%a6)     |clear the EXC_EA field
        movew   %d0,CMDREG1B(%a6) |move the lower word into CMDREG1B
        clrl    E_BYTE(%a6)
        bsetb   #UFLAG,T_BYTE(%a6)
        moveml  USER_DA(%a6),%d0-%d1/%a0-%a1 |restore data registers
        bral    uni_2

not_mvcr:
        moveml  USER_DA(%a6),%d0-%d1/%a0-%a1 |restore data registers
        frestore (%a7)+
        unlk    %a6
        addl    #4,%a7
        bral    real_fline

        |end