URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [arch/] [mips/] [kernel/] [setup.c] - Rev 1777
Go to most recent revision | Compare with Previous | Blame | View Log
/* * linux/arch/mips/kernel/setup.c * * Copyright (C) 1995 Linus Torvalds * Copyright (C) 1995 Ralf Baechle */ #include <linux/config.h> #include <linux/delay.h> #include <linux/errno.h> #include <linux/sched.h> #include <linux/kernel.h> #include <linux/mm.h> #include <linux/stddef.h> #include <linux/string.h> #include <linux/unistd.h> #include <linux/ptrace.h> #include <linux/malloc.h> #include <linux/ldt.h> #include <linux/user.h> #include <linux/a.out.h> #include <linux/tty.h> #include <asm/asm.h> #include <asm/bootinfo.h> #include <asm/vector.h> #include <asm/segment.h> #include <asm/stackframe.h> #include <asm/system.h> /* * How to handle the machine's features */ struct feature *feature; #ifdef CONFIG_ACER_PICA_61 void acer_pica_61_handle_int(void); /* * How to access the floppy controller's ports */ unsigned char jazz_fd_inb(unsigned int port); void jazz_fd_outb(unsigned char value, unsigned int port); /* * How to access the floppy DMA functions. */ void jazz_fd_enable_dma(void); void jazz_fd_disable_dma(void); int jazz_fd_request_dma(void); void jazz_fd_free_dma(void); void jazz_fd_clear_dma_ff(void); void jazz_fd_set_dma_mode(char mode); void jazz_fd_set_dma_addr(unsigned int a); void jazz_fd_set_dma_count(unsigned int count); int jazz_fd_get_dma_residue(void); void jazz_fd_enable_irq(void); void jazz_fd_disable_irq(void); void jazz_fd_cacheflush(unsigned char *addr, unsigned int size); /* * How to access the RTC functions. */ unsigned char jazz_rtc_read_data(void); void jazz_rtc_write_data(unsigned char data); struct feature acer_pica_61_feature = { acer_pica_61_handle_int, /* * How to access the floppy controller's ports */ jazz_fd_inb, jazz_fd_outb, /* * How to access the floppy DMA functions. */ jazz_fd_enable_dma, jazz_fd_disable_dma, jazz_fd_request_dma, jazz_fd_free_dma, jazz_fd_clear_dma_ff, jazz_fd_set_dma_mode, jazz_fd_set_dma_addr, jazz_fd_set_dma_count, jazz_fd_get_dma_residue, jazz_fd_enable_irq, jazz_fd_disable_irq, jazz_fd_cacheflush, /* * How to access the RTC functions. */ jazz_rtc_read_data, jazz_rtc_write_data }; #endif #ifdef CONFIG_DECSTATION void decstation_handle_handle_int(void); void isa_outb(unsigned char value, unsigned int port); unsigned char isa_inb(unsigned int port); struct feature decstation_feature = { decstation_handle_handle_int, isa_inb /* Dummy - dunno how to handle this yet */ isa_outb, /* Dummy - dunno how to handle this yet */ }; #endif #ifdef CONFIG_DESKSTATION_RPC44 void deskstation_rpc44_handle_int(void); void isa_outb(unsigned char value, unsigned int port); unsigned char isa_inb(unsigned int port); struct feature deskstation_rpc44_feature = { deskstation_rpc44_handle_int, isa_inb isa_outb, }; #endif #ifdef CONFIG_DESKSTATION_TYNE void deskstation_tyne_handle_int(void); void isa_outb(unsigned char value, unsigned int port); unsigned char isa_inb(unsigned int port); struct feature deskstation_tyne_feature = { deskstation_tyne_handle_int, isa_inb, isa_outb, }; #endif #ifdef CONFIG_MIPS_MAGNUM_4000 void mips_magnum_4000_handle_int(void); /* * How to access the floppy controller's ports */ unsigned char jazz_fd_inb(unsigned int port); void jazz_fd_outb(unsigned char value, unsigned int port); /* * How to access the floppy DMA functions. */ void jazz_fd_enable_dma(void); void jazz_fd_disable_dma(void); int jazz_fd_request_dma(void); void jazz_fd_free_dma(void); void jazz_fd_clear_dma_ff(void); void jazz_fd_set_dma_mode(char mode); void jazz_fd_set_dma_addr(unsigned int a); void jazz_fd_set_dma_count(unsigned int count); int jazz_fd_get_dma_residue(void); void jazz_fd_enable_irq(void); void jazz_fd_disable_irq(void); void jazz_fd_cacheflush(unsigned char *addr, unsigned int size); /* * How to access the RTC functions. */ unsigned char jazz_rtc_read_data(void); void jazz_rtc_write_data(unsigned char data); struct feature mips_magnum_4000_feature = { mips_magnum_4000_handle_int, /* * How to access the floppy controller's ports */ jazz_fd_inb, jazz_fd_outb, /* * How to access the floppy DMA functions. */ jazz_fd_enable_dma, jazz_fd_disable_dma, jazz_fd_request_dma, jazz_fd_free_dma, jazz_fd_clear_dma_ff, jazz_fd_set_dma_mode, jazz_fd_set_dma_addr, jazz_fd_set_dma_count, jazz_fd_get_dma_residue, jazz_fd_enable_irq, jazz_fd_disable_irq, jazz_fd_cacheflush, /* * How to access the RTC functions. */ jazz_rtc_read_data, jazz_rtc_write_data }; #endif /* * Tell us the machine setup.. */ char wait_available; /* set if the "wait" instruction available */ /* * Bus types .. */ int EISA_bus = 0; /* * Setup options */ struct drive_info_struct drive_info; struct screen_info screen_info = SCREEN_INFO; unsigned char aux_device_present; extern int ramdisk_size; extern int root_mountflags; extern int _end; extern char empty_zero_page[PAGE_SIZE]; /* * Initialise this structure so that it will be placed in the * .data section of the object file */ struct bootinfo boot_info = BOOT_INFO; /* * This is set up by the setup-routine at boot-time */ #define PARAM empty_zero_page #if 0 #define ORIG_ROOT_DEV (*(unsigned short *) (PARAM+0x1FC)) #define AUX_DEVICE_INFO (*(unsigned char *) (PARAM+0x1FF)) #endif static char command_line[CL_SIZE] = { 0, }; char saved_command_line[CL_SIZE]; #if 0 /* * Code for easy access to new style bootinfo * * Parameter: tag -- taglist entry * * returns : (tag *) -- pointer to taglist entry, NULL for not found */ tag * bi_TagFind(enum bi_tag tag) { /* TBD */ return 0; } /* * Only for taglist creators (bootloaders) * * Parameter: tag -- (enum bi_tag) taglist entry * * returns : 1 -- success * 0 -- failure */ int bi_TagAdd(enum bi_tag tag, unsigned long size, void *tagdata) { /* TBD */ return 0; } #endif /* 0 */ void setup_arch(char **cmdline_p, unsigned long * memory_start_p, unsigned long * memory_end_p) { unsigned long memory_start, memory_end; switch(boot_info.machtype) { #ifdef CONFIG_ACER_PICA_61 case MACH_ACER_PICA_61: feature = &acer_pica_61_feature; break; #endif #ifdef CONFIG_DECSTATION case MACH_DECSTATION: feature = &decstation_feature; break; #endif #ifdef CONFIG_DESKSTATION_RPC case MACH_DESKSTATION_RPC: feature = &deskstation_rpc44_feature; break; #endif #ifdef CONFIG_DESKSTATION_TYNE case MACH_DESKSTATION_TYNE: feature = &deskstation_tyne_feature; break; #endif #ifdef CONFIG_MIPS_MAGNUM_4000 case MACH_MIPS_MAGNUM_4000: feature = &mips_magnum_4000_feature; break; #endif default: panic("Unsupported architecture"); } #if 0 ROOT_DEV = to_kdev_t(ORIG_ROOT_DEV); #else #ifdef CONFIG_BLK_DEV_FD ROOT_DEV = to_kdev_t(0x021c); /* fd0H1440 */ #else ROOT_DEV = to_kdev_t(0x0101); /* ram */ #endif /* ROOT_DEV = to_kdev_t(0x00ff); */ /* NFS */ #endif memcpy(&drive_info, &boot_info.drive_info, sizeof(drive_info)); #if 0 aux_device_present = AUX_DEVICE_INFO; #endif memory_end = boot_info.memupper; memory_end &= PAGE_MASK; ramdisk_size = boot_info.ramdisk_size; if (boot_info.mount_root_rdonly) root_mountflags |= MS_RDONLY; memory_start = (unsigned long) &_end; memory_start += (ramdisk_size << 10); memcpy(saved_command_line, command_line, CL_SIZE); saved_command_line[CL_SIZE-1] = '\0'; *cmdline_p = command_line; *memory_start_p = memory_start; *memory_end_p = memory_end; #if 0 /* * Check that struct pt_regs is defined properly * (Should be optimized away, but gcc 2.6.3 is too bad..) */ if (FR_SIZE != sizeof(struct pt_regs) || FR_SIZE & 7) { panic("Check_definition_of_struct_pt_regs\n"); } #endif } #ifdef CONFIG_PROC_FS /* * BUFFER is PAGE_SIZE bytes long. */ int get_cpuinfo(char *buffer) { const char *cpu_name[] = CPU_NAMES; const char *mach_name[] = MACH_NAMES; return sprintf(buffer, "cpu\t\t\t: MIPS\n" "cpu model\t\t: %s\n" "system type\t\t: %s\n" "BogoMIPS\t\t: %lu.%02lu\n", cpu_name[boot_info.cputype < CPU_LAST ? boot_info.cputype : CPU_UNKNOWN], mach_name[boot_info.machtype < CPU_LAST ? boot_info.machtype : CPU_UNKNOWN], loops_per_sec / 500000, (loops_per_sec / 5000) % 100); } #endif /* CONFIG_PROC_FS */
Go to most recent revision | Compare with Previous | Blame | View Log