Subversion Repositories or1k

/*
 *  linux/arch/i386/kernel/time.c
 *
 *  Copyright (C) 1991, 1992, 1995  Linus Torvalds
 *
 * Adapted for PowerPC (PreP) by Gary Thomas
 *
 * This file contains the PC-specific time handling details:
 * reading the RTC at bootup, etc..
 * 1994-07-02    Alan Modra
 *	fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime
 * 1995-03-26    Markus Kuhn
 *      fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887
 *      precision CMOS clock update
 */
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/string.h>
#include <linux/mm.h>
 
#include <asm/segment.h>
#include <asm/io.h>
#include <asm/nvram.h>
#include <asm/mc146818rtc.h>
 
#include <linux/timex.h>
 
extern int isBeBox[];
 
#define TIMER_IRQ 0
 
/* Cycle counter value at the previous timer interrupt.. */
static unsigned long long last_timer_cc = 0;
static unsigned long long init_timer_cc = 0;
 
static inline int CMOS_READ(int addr)
{
	outb(addr>>8, NVRAM_AS1);
	outb(addr, NVRAM_AS0);
	return (inb(NVRAM_DATA));
}
 
/* This function must be called with interrupts disabled 
 * It was inspired by Steve McCanne's microtime-i386 for BSD.  -- jrs
 * 
 * However, the pc-audio speaker driver changes the divisor so that
 * it gets interrupted rather more often - it loads 64 into the
 * counter rather than 11932! This has an adverse impact on
 * do_gettimeoffset() -- it stops working! What is also not
 * good is that the interval that our timer function gets called
 * is no longer 10.0002 ms, but 9.9767 ms. To get around this
 * would require using a different timing source. Maybe someone
 * could use the RTC - I know that this can interrupt at frequencies
 * ranging from 8192Hz to 2Hz. If I had the energy, I'd somehow fix
 * it so that at startup, the timer code in sched.c would select
 * using either the RTC or the 8253 timer. The decision would be
 * based on whether there was any other device around that needed
 * to trample on the 8253. I'd set up the RTC to interrupt at 1024 Hz,
 * and then do some jiggery to have a version of do_timer that 
 * advanced the clock by 1/1024 s. Every time that reached over 1/100
 * of a second, then do all the old code. If the time was kept correct
 * then do_gettimeoffset could just return 0 - there is no low order
 * divider that can be accessed.
 *
 * Ideally, you would be able to use the RTC for the speaker driver,
 * but it appears that the speaker driver really needs interrupt more
 * often than every 120 us or so.
 *
 * Anyway, this needs more thought....		pjsg (1993-08-28)
 * 
 * If you are really that interested, you should be reading
 * comp.protocols.time.ntp!
 */
 
#define TICK_SIZE tick
 
static unsigned long do_slow_gettimeoffset(void)
{
	int count;
	unsigned long offset = 0;
 
	/* timer count may underflow right here */
	outb_p(0x00, 0x43);	/* latch the count ASAP */
	count = inb_p(0x40);	/* read the latched count */
	count |= inb(0x40) << 8;
	/* we know probability of underflow is always MUCH less than 1% */
	if (count > (LATCH - LATCH/100)) {
		/* check for pending timer interrupt */
		outb_p(0x0a, 0x20);
		if (inb(0x20) & 1)
			offset = TICK_SIZE;
	}
	count = ((LATCH-1) - count) * TICK_SIZE;
	count = (count + LATCH/2) / LATCH;
	return offset + count;
}
 
static unsigned long (*do_gettimeoffset)(void) = do_slow_gettimeoffset;
 
/*
 * This version of gettimeofday has near microsecond resolution.
 */
void do_gettimeofday(struct timeval *tv)
{
	unsigned long flags;
 
	save_flags(flags);
	cli();
	*tv = xtime;
	tv->tv_usec += do_gettimeoffset();
	if (tv->tv_usec >= 1000000) {
		tv->tv_usec -= 1000000;
		tv->tv_sec++;
	}
	restore_flags(flags);
}
 
void do_settimeofday(struct timeval *tv)
{
	cli();
	/* This is revolting. We need to set the xtime.tv_usec
	 * correctly. However, the value in this location is
	 * is value at the last tick.
	 * Discover what correction gettimeofday
	 * would have done, and then undo it!
	 */
	tv->tv_usec -= do_gettimeoffset();
 
	if (tv->tv_usec < 0) {
		tv->tv_usec += 1000000;
		tv->tv_sec--;
	}
 
	xtime = *tv;
	time_state = TIME_BAD;
	time_maxerror = 0x70000000;
	time_esterror = 0x70000000;
	sti();
}
 
 
/*
 * In order to set the CMOS clock precisely, set_rtc_mmss has to be
 * called 500 ms after the second nowtime has started, because when
 * nowtime is written into the registers of the CMOS clock, it will
 * jump to the next second precisely 500 ms later. Check the Motorola
 * MC146818A or Dallas DS12887 data sheet for details.
 */
static int set_rtc_mmss(unsigned long nowtime)
{
	int retval = 0;
	int real_seconds, real_minutes, cmos_minutes;
	unsigned char save_control, save_freq_select;
 
#ifdef __powerpc__
return (-1);  /* Not implemented */
#else	
 
	save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
 
	save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
 
	cmos_minutes = CMOS_READ(RTC_MINUTES);
	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
		BCD_TO_BIN(cmos_minutes);
 
	/*
	 * since we're only adjusting minutes and seconds,
	 * don't interfere with hour overflow. This avoids
	 * messing with unknown time zones but requires your
	 * RTC not to be off by more than 15 minutes
	 */
	real_seconds = nowtime % 60;
	real_minutes = nowtime / 60;
	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
		real_minutes += 30;		/* correct for half hour time zone */
	real_minutes %= 60;
 
	if (abs(real_minutes - cmos_minutes) < 30) {
		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
			BIN_TO_BCD(real_seconds);
			BIN_TO_BCD(real_minutes);
		}
		CMOS_WRITE(real_seconds,RTC_SECONDS);
		CMOS_WRITE(real_minutes,RTC_MINUTES);
	} else
		retval = -1;
 
	/* The following flags have to be released exactly in this order,
	 * otherwise the DS12887 (popular MC146818A clone with integrated
	 * battery and quartz) will not reset the oscillator and will not
	 * update precisely 500 ms later. You won't find this mentioned in
	 * the Dallas Semiconductor data sheets, but who believes data
	 * sheets anyway ...                           -- Markus Kuhn
	 */
	CMOS_WRITE(save_control, RTC_CONTROL);
	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
 
	return retval;
#endif	
}
 
/* last time the cmos clock got updated */
static long last_rtc_update = 0;
 
/*
 * timer_interrupt() needs to keep up the real-time clock,
 * as well as call the "do_timer()" routine every clocktick
 */
static inline void timer_interrupt(int irq, void *dev, struct pt_regs * regs)
{
	do_timer(regs);
 
	/*
	 * If we have an externally synchronized Linux clock, then update
	 * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be
	 * called as close as possible to 500 ms before the new second starts.
	 */
	if (time_state != TIME_BAD && xtime.tv_sec > last_rtc_update + 660 &&
	    xtime.tv_usec > 500000 - (tick >> 1) &&
	    xtime.tv_usec < 500000 + (tick >> 1))
	  if (set_rtc_mmss(xtime.tv_sec) == 0)
	    last_rtc_update = xtime.tv_sec;
	  else
	    last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */
#if 0
	/* As we return to user mode fire off the other CPU schedulers.. this is 
	   basically because we don't yet share IRQ's around. This message is
	   rigged to be safe on the 386 - basically its a hack, so don't look
	   closely for now.. */
	smp_message_pass(MSG_ALL_BUT_SELF, MSG_RESCHEDULE, 0L, 0); 
#endif	    
}
 
/* Converts Gregorian date to seconds since 1970-01-01 00:00:00.
 * Assumes input in normal date format, i.e. 1980-12-31 23:59:59
 * => year=1980, mon=12, day=31, hour=23, min=59, sec=59.
 *
 * [For the Julian calendar (which was used in Russia before 1917,
 * Britain & colonies before 1752, anywhere else before 1582,
 * and is still in use by some communities) leave out the
 * -year/100+year/400 terms, and add 10.]
 *
 * This algorithm was first published by Gauss (I think).
 *
 * WARNING: this function will overflow on 2106-02-07 06:28:16 on
 * machines were long is 32-bit! (However, as time_t is signed, we
 * will already get problems at other places on 2038-01-19 03:14:08)
 */
static inline unsigned long mktime(unsigned int year, unsigned int mon,
	unsigned int day, unsigned int hour,
	unsigned int min, unsigned int sec)
{
	if (0 >= (int) (mon -= 2)) {	/* 1..12 -> 11,12,1..10 */
		mon += 12;	/* Puts Feb last since it has leap day */
		year -= 1;
	}
	return (((
	    (unsigned long)(year/4 - year/100 + year/400 + 367*mon/12 + day) +
	      year*365 - 719499
	    )*24 + hour /* now have hours */
	   )*60 + min /* now have minutes */
	  )*60 + sec; /* finally seconds */
}
 
unsigned long get_cmos_time(void)
{
	unsigned int year, mon, day, hour, min, sec;
	int i;
 
	if (isBeBox[0])
	{
#ifndef __powerpc__	
	/* The Linux interpretation of the CMOS clock register contents:
	 * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
	 * RTC registers show the second which has precisely just started.
	 * Let's hope other operating systems interpret the RTC the same way.
	 */
	/* read RTC exactly on falling edge of update flag */
	for (i = 0 ; i < 1000000 ; i++)	/* may take up to 1 second... */
		if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
			break;
	for (i = 0 ; i < 1000000 ; i++)	/* must try at least 2.228 ms */
		if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
			break;
#endif			
		do { /* Isn't this overkill ? UIP above should guarantee consistency */
			sec = CMOS_MCRTC_READ(MCRTC_SECONDS);
			min = CMOS_MCRTC_READ(MCRTC_MINUTES);
			hour = CMOS_MCRTC_READ(MCRTC_HOURS);
			day = CMOS_MCRTC_READ(MCRTC_DAY_OF_MONTH);
			mon = CMOS_MCRTC_READ(MCRTC_MONTH);
			year = CMOS_MCRTC_READ(MCRTC_YEAR);
		} while (sec != CMOS_MCRTC_READ(MCRTC_SECONDS));
	} else
	{ /* Motorola PowerStack etc. */
		do { /* Isn't this overkill ? UIP above should guarantee consistency */
			sec = CMOS_READ(RTC_SECONDS);
			min = CMOS_READ(RTC_MINUTES);
			hour = CMOS_READ(RTC_HOURS);
			day = CMOS_READ(RTC_DAY_OF_MONTH);
			mon = CMOS_READ(RTC_MONTH);
			year = CMOS_READ(RTC_YEAR);
		} while (sec != CMOS_READ(RTC_SECONDS));
		BCD_TO_BIN(sec);
		BCD_TO_BIN(min);
		BCD_TO_BIN(hour);
		BCD_TO_BIN(day);
		BCD_TO_BIN(mon);
		BCD_TO_BIN(year);
	}
#if 0	
printk("CMOS TOD - M/D/Y H:M:S = %d/%d/%d %d:%02d:%02d\n", mon, day, year, hour, min, sec);
#endif
	if ((year += 1900) < 1970)
		year += 100;
	return mktime(year, mon, day, hour, min, sec);
}
 
void time_init(void)
{
	void (*irq_handler)(int, struct pt_regs *);
	xtime.tv_sec = get_cmos_time();
	xtime.tv_usec = 0;
 
	/* If we have the CPU hardware time counters, use them */
	irq_handler = timer_interrupt;
	if (request_irq(TIMER_IRQ, irq_handler, 0, "timer", NULL) != 0)
		panic("Could not allocate timer IRQ!");
}