URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [isdn/] [sc/] [command.c] - Rev 1772
Go to most recent revision | Compare with Previous | Blame | View Log
/* * $Id: command.c,v 1.1 2005-12-20 10:17:12 jcastillo Exp $ * Copyright (C) 1996 SpellCaster Telecommunications Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * * For more information, please contact gpl-info@spellcast.com or write: * * SpellCaster Telecommunications Inc. * 5621 Finch Avenue East, Unit #3 * Scarborough, Ontario Canada * M1B 2T9 * +1 (416) 297-8565 * +1 (416) 297-6433 Facsimile */ #define __NO_VERSION__ #include "includes.h" /* This must be first */ #include "hardware.h" #include "message.h" #include "card.h" #include "scioc.h" int dial(int card, unsigned long channel, setup_parm setup); int hangup(int card, unsigned long channel); int answer(int card, unsigned long channel); int clreaz(int card, unsigned long channel); int seteaz(int card, unsigned long channel, char *); int geteaz(int card, unsigned long channel, char *); int setsil(int card, unsigned long channel, char *); int getsil(int card, unsigned long channel, char *); int setl2(int card, unsigned long arg); int getl2(int card, unsigned long arg); int setl3(int card, unsigned long arg); int getl3(int card, unsigned long arg); int lock(void); int unlock(void); int acceptb(int card, unsigned long channel); extern int cinst; extern board *adapter[]; extern int sc_ioctl(int, scs_ioctl *); extern int setup_buffers(int, int, unsigned int); extern int indicate_status(int, int,ulong,char*); extern void check_reset(unsigned long); extern int send_and_receive(int, unsigned int, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char, unsigned char *, RspMessage *, int); extern int sendmessage(int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int, unsigned int *); extern inline void pullphone(char *, char *); #ifdef DEBUG /* * Translate command codes to strings */ static char *commands[] = { "ISDN_CMD_IOCTL", "ISDN_CMD_DIAL", "ISDN_CMD_ACCEPTB", "ISDN_CMD_ACCEPTB", "ISDN_CMD_HANGUP", "ISDN_CMD_CLREAZ", "ISDN_CMD_SETEAZ", "ISDN_CMD_GETEAZ", "ISDN_CMD_SETSIL", "ISDN_CMD_GETSIL", "ISDN_CMD_SETL2", "ISDN_CMD_GETL2", "ISDN_CMD_SETL3", "ISDN_CMD_GETL3", "ISDN_CMD_LOCK", "ISDN_CMD_UNLOCK", "ISDN_CMD_SUSPEND", "ISDN_CMD_RESUME" }; /* * Translates ISDN4Linux protocol codes to strings for debug messages */ static char *l3protos[] = { "ISDN_PROTO_L3_TRANS" }; static char *l2protos[] = { "ISDN_PROTO_L2_X75I", "ISDN_PROTO_L2_X75UI", "ISDN_PROTO_L2_X75BUI", "ISDN_PROTO_L2_HDLC", "ISDN_PROTO_L2_TRANS" }; #endif int get_card_from_id(int driver) { int i; for(i = 0 ; i < cinst ; i++) { if(adapter[i]->driverId == driver) return i; } return -NODEV; } /* * command */ int command(isdn_ctrl *cmd) { int card; card = get_card_from_id(cmd->driver); if(!IS_VALID_CARD(card)) { pr_debug("Invalid param: %d is not a valid card id\n", card); return -ENODEV; } pr_debug("%s: Received %s command from Link Layer\n", adapter[card]->devicename, commands[cmd->command]); /* * Dispatch the command */ switch(cmd->command) { case ISDN_CMD_IOCTL: { unsigned long cmdptr; scs_ioctl ioc; int err; memcpy(&cmdptr, cmd->parm.num, sizeof(unsigned long)); if((err = copy_from_user(&ioc, (scs_ioctl *) cmdptr, sizeof(scs_ioctl)))) { pr_debug("%s: Failed to verify user space 0x%x\n", adapter[card]->devicename, cmdptr); return err; } return sc_ioctl(card, &ioc); } case ISDN_CMD_DIAL: return dial(card, cmd->arg, cmd->parm.setup); case ISDN_CMD_HANGUP: return hangup(card, cmd->arg); case ISDN_CMD_ACCEPTD: return answer(card, cmd->arg); case ISDN_CMD_ACCEPTB: return acceptb(card, cmd->arg); case ISDN_CMD_CLREAZ: return clreaz(card, cmd->arg); case ISDN_CMD_SETEAZ: return seteaz(card, cmd->arg, cmd->parm.num); case ISDN_CMD_GETEAZ: return geteaz(card, cmd->arg, cmd->parm.num); case ISDN_CMD_SETSIL: return setsil(card, cmd->arg, cmd->parm.num); case ISDN_CMD_GETSIL: return getsil(card, cmd->arg, cmd->parm.num); case ISDN_CMD_SETL2: return setl2(card, cmd->arg); case ISDN_CMD_GETL2: return getl2(card, cmd->arg); case ISDN_CMD_SETL3: return setl3(card, cmd->arg); case ISDN_CMD_GETL3: return getl3(card, cmd->arg); case ISDN_CMD_LOCK: return lock(); case ISDN_CMD_UNLOCK: return unlock(); default: return -EINVAL; } return 0; } /* * Confirm our ability to communicate with the board. This test assumes no * other message activity is present */ int loopback(int card) { int status; static char testmsg[] = "Test Message"; RspMessage rspmsg; if(!IS_VALID_CARD(card)) { pr_debug("Invalid param: %d is not a valid card id\n", card); return -ENODEV; } pr_debug("%s: Sending loopback message\n", adapter[card]->devicename); /* * Send the loopback message to confirm that memory transfer is * operational */ status = send_and_receive(card, CMPID, cmReqType1, cmReqClass0, cmReqMsgLpbk, 0, (unsigned char) strlen(testmsg), (unsigned char *)testmsg, &rspmsg, SAR_TIMEOUT); if (!status) { pr_debug("%s: Loopback message successfully sent\n", adapter[card]->devicename); if(strcmp(rspmsg.msg_data.byte_array, testmsg)) { pr_debug("%s: Loopback return != sent\n", adapter[card]->devicename); return -EIO; } return 0; } else { pr_debug("%s: Send loopback message failed\n", adapter[card]->devicename); return -EIO; } } /* * start the onboard firmware */ int startproc(int card) { int status; if(!IS_VALID_CARD(card)) { pr_debug("Invalid param: %d is not a valid card id\n", card); return -ENODEV; } /* * send start msg */ status = sendmessage(card, CMPID,cmReqType2, cmReqClass0, cmReqStartProc, 0,0,0); pr_debug("%s: Sent startProc\n", adapter[card]->devicename); return status; } int loadproc(int card, char *data) { return -1; } /* * Dials the number passed in */ int dial(int card, unsigned long channel, setup_parm setup) { int status; char Phone[48]; if(!IS_VALID_CARD(card)) { pr_debug("Invalid param: %d is not a valid card id\n", card); return -ENODEV; } /*extract ISDN number to dial from eaz/msn string*/ strcpy(Phone,setup.phone); /*send the connection message*/ status = sendmessage(card, CEPID,ceReqTypePhy, ceReqClass1, ceReqPhyConnect, (unsigned char) channel+1, strlen(Phone), (unsigned int *) Phone); pr_debug("%s: Dialing %s on channel %d\n", adapter[card]->devicename, Phone, channel+1); return status; } /* * Answer an incoming call */ int answer(int card, unsigned long channel) { if(!IS_VALID_CARD(card)) { pr_debug("Invalid param: %d is not a valid card id\n", card); return -ENODEV; } if(setup_buffers(card, channel+1, BUFFER_SIZE)) { hangup(card, channel+1); return -ENOBUFS; } indicate_status(card, ISDN_STAT_BCONN,channel,NULL); pr_debug("%s: Answered incoming call on channel %s\n", adapter[card]->devicename, channel+1); return 0; } /* * Hangup up the call on specified channel */ int hangup(int card, unsigned long channel) { int status; if(!IS_VALID_CARD(card)) { pr_debug("Invalid param: %d is not a valid card id\n", card); return -ENODEV; } status = sendmessage(card, CEPID, ceReqTypePhy, ceReqClass1, ceReqPhyDisconnect, (unsigned char) channel+1, 0, NULL); pr_debug("%s: Sent HANGUP message to channel %d\n", adapter[card]->devicename, channel+1); return status; } /* * Set the layer 2 protocol (X.25, HDLC, Raw) */ int setl2(int card, unsigned long arg) { int status =0; int protocol,channel; if(!IS_VALID_CARD(card)) { pr_debug("Invalid param: %d is not a valid card id\n", card); return -ENODEV; } protocol = arg >> 8; channel = arg & 0xff; adapter[card]->channel[channel].l2_proto = protocol; pr_debug("%s: Level 2 protocol for channel %d set to %s from %d\n", adapter[card]->devicename, channel+1,l2protos[adapter[card]->channel[channel].l2_proto],protocol); /* * check that the adapter is also set to the correct protocol */ pr_debug("%s: Sending GetFrameFormat for channel %d\n", adapter[card]->devicename, channel+1); status = sendmessage(card, CEPID, ceReqTypeCall, ceReqClass0, ceReqCallGetFrameFormat, (unsigned char)channel+1, 1, (unsigned int *) protocol); if(status) return status; return 0; } /* * Get the layer 2 protocol */ int getl2(int card, unsigned long channel) { if(!IS_VALID_CARD(card)) { pr_debug("Invalid param: %d is not a valid card id\n", card); return -ENODEV; } pr_debug("%s: Level 2 protocol for channel %d reported as %s\n", adapter[card]->devicename, channel+1, l2protos[adapter[card]->channel[channel].l2_proto]); return adapter[card]->channel[channel].l2_proto; } /* * Set the layer 3 protocol */ int setl3(int card, unsigned long channel) { int protocol = channel >> 8; if(!IS_VALID_CARD(card)) { pr_debug("Invalid param: %d is not a valid card id\n", card); return -ENODEV; } adapter[card]->channel[channel].l3_proto = protocol; pr_debug("%s: Level 3 protocol for channel %d set to %s\n", adapter[card]->devicename, channel+1, l3protos[protocol]); return 0; } /* * Get the layer 3 protocol */ int getl3(int card, unsigned long arg) { if(!IS_VALID_CARD(card)) { pr_debug("Invalid param: %d is not a valid card id\n", card); return -ENODEV; } pr_debug("%s: Level 3 protocol for channel %d reported as %s\n", adapter[card]->devicename, arg+1, l3protos[adapter[card]->channel[arg].l3_proto]); return adapter[card]->channel[arg].l3_proto; } int acceptb(int card, unsigned long channel) { if(!IS_VALID_CARD(card)) { pr_debug("Invalid param: %d is not a valid card id\n", card); return -ENODEV; } if(setup_buffers(card, channel+1, BUFFER_SIZE)) { hangup(card, channel+1); return -ENOBUFS; } pr_debug("%s: B-Channel connection accepted on channel %d\n", adapter[card]->devicename, channel+1); indicate_status(card, ISDN_STAT_BCONN, channel, NULL); return 0; } int clreaz(int card, unsigned long arg) { if(!IS_VALID_CARD(card)) { pr_debug("Invalid param: %d is not a valid card id\n", card); return -ENODEV; } strcpy(adapter[card]->channel[arg].eazlist, ""); adapter[card]->channel[arg].eazclear = 1; pr_debug("%s: EAZ List cleared for channel %d\n", adapter[card]->devicename, arg+1); return 0; } int seteaz(int card, unsigned long arg, char *num) { if(!IS_VALID_CARD(card)) { pr_debug("Invalid param: %d is not a valid card id\n", card); return -ENODEV; } strcpy(adapter[card]->channel[arg].eazlist, num); adapter[card]->channel[arg].eazclear = 0; pr_debug("%s: EAZ list for channel %d set to: %s\n", adapter[card]->devicename, arg+1, adapter[card]->channel[arg].eazlist); return 0; } int geteaz(int card, unsigned long arg, char *num) { if(!IS_VALID_CARD(card)) { pr_debug("Invalid param: %d is not a valid card id\n", card); return -ENODEV; } strcpy(num, adapter[card]->channel[arg].eazlist); pr_debug("%s: EAZ List for channel %d reported: %s\n", adapter[card]->devicename, arg+1, adapter[card]->channel[arg].eazlist); return 0; } int setsil(int card, unsigned long arg, char *num) { if(!IS_VALID_CARD(card)) { pr_debug("Invalid param: %d is not a valid card id\n", card); return -ENODEV; } strcpy(adapter[card]->channel[arg].sillist, num); pr_debug("%s: Service Indicators for channel %d set: %s\n", adapter[card]->devicename, arg+1, adapter[card]->channel[arg].sillist); return 0; } int getsil(int card, unsigned long arg, char *num) { if(!IS_VALID_CARD(card)) { pr_debug("Invalid param: %d is not a valid card id\n", card); return -ENODEV; } strcpy(num, adapter[card]->channel[arg].sillist); pr_debug("%s: SIL for channel %d reported: %s\n", adapter[card]->devicename, arg+1, adapter[card]->channel[arg].sillist); return 0; } int lock() { MOD_INC_USE_COUNT; return 0; } int unlock() { MOD_DEC_USE_COUNT; return 0; } int reset(int card) { unsigned long flags; if(!IS_VALID_CARD(card)) { pr_debug("Invalid param: %d is not a valid card id\n", card); return -ENODEV; } indicate_status(card, ISDN_STAT_STOP, 0, NULL); if(adapter[card]->EngineUp) { del_timer(&adapter[card]->stat_timer); } adapter[card]->EngineUp = 0; save_flags(flags); cli(); init_timer(&adapter[card]->reset_timer); adapter[card]->reset_timer.function = check_reset; adapter[card]->reset_timer.data = card; adapter[card]->reset_timer.expires = jiffies + CHECKRESET_TIME; add_timer(&adapter[card]->reset_timer); restore_flags(flags); outb(0x1,adapter[card]->ioport[SFT_RESET]); pr_debug("%s: Adapter Reset\n", adapter[card]->devicename); return 0; } void flushreadfifo (int card) { while(inb(adapter[card]->ioport[FIFO_STATUS]) & RF_HAS_DATA) inb(adapter[card]->ioport[FIFO_READ]); }
Go to most recent revision | Compare with Previous | Blame | View Log