OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [isdn/] [sc/] [message.c] - Rev 1765

Compare with Previous | Blame | View Log

/*
 *  $Id: message.c,v 1.1 2005-12-20 10:17:12 jcastillo Exp $
 *  Copyright (C) 1996  SpellCaster Telecommunications Inc.
 *
 *  message.c - functions for sending and receiving control messages
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 *  For more information, please contact gpl-info@spellcast.com or write:
 *
 *     SpellCaster Telecommunications Inc.
 *     5621 Finch Avenue East, Unit #3
 *     Scarborough, Ontario  Canada
 *     M1B 2T9
 *     +1 (416) 297-8565
 *     +1 (416) 297-6433 Facsimile
 */
 
#define __NO_VERSION__
#include "includes.h"
#include "hardware.h"
#include "message.h"
#include "card.h"
 
extern board *adapter[];
extern unsigned int cinst;
 
/*
 * Obligitory function prototypes
 */
extern int indicate_status(int,ulong,char*);
extern int scm_command(isdn_ctrl *);
extern void *memcpy_fromshmem(int, void *, const void *, size_t);
 
/*
 * Dump message queue in shared memory to screen
 */
void dump_messages(int card) 
{
	DualPortMemory dpm;
	unsigned long flags;
 
	int i =0;
 
	if (!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
	}
 
	save_flags(flags);
	cli();
	outb(adapter[card]->ioport[adapter[card]->shmem_pgport], 
		(adapter[card]->shmem_magic >> 14) | 0x80);
	memcpy_fromshmem(card, &dpm, 0, sizeof(dpm));
	restore_flags(flags);
 
	pr_debug("%s: Dumping Request Queue\n", adapter[card]->devicename);
	for (i = 0; i < dpm.req_head; i++) {
		pr_debug("%s: Message #%d: (%d,%d,%d), link: %d\n",
				adapter[card]->devicename, i,
				dpm.req_queue[i].type,
				dpm.req_queue[i].class,
				dpm.req_queue[i].code,
				dpm.req_queue[i].phy_link_no);
	}
 
	pr_debug("%s: Dumping Response Queue\n", adapter[card]->devicename);
	for (i = 0; i < dpm.rsp_head; i++) {
		pr_debug("%s: Message #%d: (%d,%d,%d), link: %d, status: %d\n",
				adapter[card]->devicename, i,
				dpm.rsp_queue[i].type,
				dpm.rsp_queue[i].class,
				dpm.rsp_queue[i].code,
				dpm.rsp_queue[i].phy_link_no,
				dpm.rsp_queue[i].rsp_status);
	}
 
}	
 
/*
 * receive a message from the board
 */
int receivemessage(int card, RspMessage *rspmsg) 
{
	DualPortMemory *dpm;
	unsigned long flags;
 
	if (!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return -EINVAL;
	}
 
	pr_debug("%s: Entered receivemessage\n",adapter[card]->devicename);
 
	/*
	 * See if there are messages waiting
	 */
	if (inb(adapter[card]->ioport[FIFO_STATUS]) & RF_HAS_DATA) {
		/*
		 * Map in the DPM to the base page and copy the message
		 */
		save_flags(flags);
		cli();
		outb((adapter[card]->shmem_magic >> 14) | 0x80,
			adapter[card]->ioport[adapter[card]->shmem_pgport]); 
		dpm = (DualPortMemory *) adapter[card]->rambase;
		memcpy_fromio(rspmsg, &(dpm->rsp_queue[dpm->rsp_tail]), 
			MSG_LEN);
		dpm->rsp_tail = (dpm->rsp_tail+1) % MAX_MESSAGES;
		inb(adapter[card]->ioport[FIFO_READ]);
		restore_flags(flags);
 
		/*
		 * Tell the board that the message is received
		 */
		pr_debug("%s: Received Message seq:%d pid:%d time:%d cmd:%d "
				"cnt:%d (type,class,code):(%d,%d,%d) "
				"link:%d stat:0x%x\n",
					adapter[card]->devicename,
					rspmsg->sequence_no,
					rspmsg->process_id,
					rspmsg->time_stamp,
					rspmsg->cmd_sequence_no,
					rspmsg->msg_byte_cnt,
					rspmsg->type,
					rspmsg->class,
					rspmsg->code,
					rspmsg->phy_link_no, 
					rspmsg->rsp_status);
 
		return 0;
	}
	return -ENOMSG;
}
 
/*
 * send a message to the board
 */
int sendmessage(int card,
		unsigned int procid,
		unsigned int type, 
		unsigned int class, 
		unsigned int code,
		unsigned int link, 
		unsigned int data_len, 
		unsigned int *data) 
{
	DualPortMemory *dpm;
	ReqMessage sndmsg;
	unsigned long flags;
 
	if (!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return -EINVAL;
	}
 
	/*
	 * Make sure we only send CEPID messages when the engine is up
	 * and CMPID messages when it is down
	 */
	if(adapter[card]->EngineUp && procid == CMPID) {
		pr_debug("%s: Attempt to send CM message with engine up\n",
			adapter[card]->devicename);
		return -ESRCH;
	}
 
	if(!adapter[card]->EngineUp && procid == CEPID) {
		pr_debug("%s: Attempt to send CE message with engine down\n",
			adapter[card]->devicename);
		return -ESRCH;
	}
 
	memset(&sndmsg, 0, MSG_LEN);
	sndmsg.msg_byte_cnt = 4;
	sndmsg.type = type;
	sndmsg.class = class;
	sndmsg.code = code;
	sndmsg.phy_link_no = link;
 
	if (data_len > 0) {
		if (data_len > MSG_DATA_LEN)
			data_len = MSG_DATA_LEN;
		memcpy(&(sndmsg.msg_data), data, data_len);
		sndmsg.msg_byte_cnt = data_len + 8;
	}
 
	sndmsg.process_id = procid;
	sndmsg.sequence_no = adapter[card]->seq_no++ % 256;
 
	/*
	 * wait for an empty slot in the queue
	 */
	while (!(inb(adapter[card]->ioport[FIFO_STATUS]) & WF_NOT_FULL))
		SLOW_DOWN_IO;
 
	/*
	 * Disable interrupts and map in shared memory
	 */
	save_flags(flags);
	cli();
	outb((adapter[card]->shmem_magic >> 14) | 0x80,
		adapter[card]->ioport[adapter[card]->shmem_pgport]); 
	dpm = (DualPortMemory *) adapter[card]->rambase;	/* Fix me */
	memcpy_toio(&(dpm->req_queue[dpm->req_head]),&sndmsg,MSG_LEN);
	dpm->req_head = (dpm->req_head+1) % MAX_MESSAGES;
	outb(sndmsg.sequence_no, adapter[card]->ioport[FIFO_WRITE]);
	restore_flags(flags);
 
	pr_debug("%s: Sent Message seq:%d pid:%d time:%d "
			"cnt:%d (type,class,code):(%d,%d,%d) "
			"link:%d\n ",
				adapter[card]->devicename,
				sndmsg.sequence_no,
				sndmsg.process_id,
				sndmsg.time_stamp,
				sndmsg.msg_byte_cnt,
				sndmsg.type,
				sndmsg.class,
				sndmsg.code,
				sndmsg.phy_link_no); 
 
	return 0;
}
 
int send_and_receive(int card,
		unsigned int procid, 
		unsigned char type,
		unsigned char class, 
		unsigned char code,
		unsigned char link,
	 	unsigned char data_len, 
		unsigned char *data, 
		RspMessage *mesgdata,
		int timeout) 
{
	int retval;
	int tries;
 
	if (!IS_VALID_CARD(card)) {
		pr_debug("Invalid param: %d is not a valid card id\n", card);
		return -EINVAL;
	}
 
	adapter[card]->want_async_messages = 1;
	retval = sendmessage(card, procid, type, class, code, link, 
			data_len, (unsigned int *) data);
 
	if (retval) {
		pr_debug("%s: SendMessage failed in SAR\n",
			adapter[card]->devicename);
		adapter[card]->want_async_messages = 0;
		return -EIO;
	}
 
	tries = 0;
	/* wait for the response */
	while (tries < timeout) {
		current->state = TASK_INTERRUPTIBLE;
		current->timeout = jiffies + 1; 
		schedule();
 
		pr_debug("SAR waiting..\n");
 
		/*
		 * See if we got our message back
		 */
		if ((adapter[card]->async_msg.type == type) &&
		    (adapter[card]->async_msg.class == class) &&
		    (adapter[card]->async_msg.code == code) &&
		    (adapter[card]->async_msg.phy_link_no == link)) {
 
			/*
			 * Got it!
			 */
			pr_debug("%s: Got ASYNC message\n",
				adapter[card]->devicename);
			memcpy(mesgdata, &(adapter[card]->async_msg), 
				sizeof(RspMessage));
			adapter[card]->want_async_messages = 0;
			return 0;
		}
 
   		tries++;
	}
 
	pr_debug("%s: SAR message timeout\n", adapter[card]->devicename);
	adapter[card]->want_async_messages = 0;
	return -ETIME;
}
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.