Subversion Repositories or1k

#
# Network device configuration
#
tristate 'Dummy net driver support' CONFIG_DUMMY
tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
  tristate 'Frame relay DLCI support (EXPERIMENTAL)' CONFIG_DLCI
  if [ "$CONFIG_DLCI" = "y" -o "$CONFIG_DLCI" = "m" ]; then
    int '  Max open DLCI' CONFIG_DLCI_COUNT 24
    int '  Max DLCI per device' CONFIG_DLCI_MAX 8
    dep_tristate '  SDLA (Sangoma S502/S508) support' CONFIG_SDLA $CONFIG_DLCI
  fi
fi
tristate 'PLIP (parallel port) support' CONFIG_PLIP
tristate 'PPP (point-to-point) support' CONFIG_PPP
if [ ! "$CONFIG_PPP" = "n" ]; then
  comment 'CCP compressors for PPP are only built as modules.'
fi
tristate 'SLIP (serial line) support' CONFIG_SLIP
if [ "$CONFIG_SLIP" != "n" ]; then
  bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
  bool ' Keepalive and linefill' CONFIG_SLIP_SMART
  bool ' Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
fi
bool 'Radio network interfaces' CONFIG_NET_RADIO
if [ "$CONFIG_NET_RADIO" != "n" ]; then
  if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
    tristate 'BAYCOM ser12 and par96 driver for AX.25' CONFIG_BAYCOM
    tristate 'Soundcard modem driver for AX.25' CONFIG_SOUNDMODEM
    if [ "$CONFIG_SOUNDMODEM" != "n" ]; then
      bool 'Soundmodem support for Soundblaster and compatible cards' CONFIG_SOUNDMODEM_SBC
      bool 'Soundmodem support for WSS and Crystal cards' CONFIG_SOUNDMODEM_WSS
      bool 'Soundmodem support for 1200 baud AFSK modulation' CONFIG_SOUNDMODEM_AFSK1200
      bool 'Soundmodem support for 2400 baud AFSK modulation (7.3728MHz crystal)' CONFIG_SOUNDMODEM_AFSK2400_7
      bool 'Soundmodem support for 2400 baud AFSK modulation (8MHz crystal)' CONFIG_SOUNDMODEM_AFSK2400_8
      bool 'Soundmodem support for 2666 baud AFSK modulation' CONFIG_SOUNDMODEM_AFSK2666
      bool 'Soundmodem support for 4800 baud HAPN-1 modulation' CONFIG_SOUNDMODEM_HAPN4800
      bool 'Soundmodem support for 4800 baud PSK modulation' CONFIG_SOUNDMODEM_PSK4800
      bool 'Soundmodem support for 9600 baud FSK G3RUH modulation' CONFIG_SOUNDMODEM_FSK9600
    fi
  fi
  tristate 'Serial port KISS driver for AX.25' CONFIG_MKISS
  tristate 'BPQ Ethernet driver for AX.25' CONFIG_BPQETHER
  tristate 'Gracilis PackeTwin support for AX.25' CONFIG_PT
  tristate 'Ottawa PI and PI/2 support for AX.25' CONFIG_PI
  tristate 'Z8530 SCC KISS emulation driver for AX.25' CONFIG_SCC
  tristate 'STRIP (Metricom starmode radio IP)' CONFIG_STRIP
  tristate 'AT&T WaveLAN & DEC RoamAbout DS support' CONFIG_WAVELAN
fi
#
#       Ethernet
#
bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET
if [ "$CONFIG_NET_ETHERNET" = "y" ]; then
  bool '3COM ISA, EISA and PCI cards' CONFIG_NET_VENDOR_3COM
  if [ "$CONFIG_NET_VENDOR_3COM" = "y" ]; then
    tristate '3c501 support' CONFIG_EL1
    tristate '3c503 support' CONFIG_EL2
    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      tristate '3c505 support' CONFIG_ELPLUS
      tristate '3c507 support' CONFIG_EL16
    fi
    tristate '3c509/3c579 support' CONFIG_EL3
    tristate '3c515 ISA Fast EtherLink' CONFIG_3C515
    tristate '3c590/3c900 series (592/595/597/900/905) "Vortex/Boomerang" support' CONFIG_VORTEX
  fi
  bool 'Western Digital/SMC ISA and EISA cards' CONFIG_NET_VENDOR_SMC
  if [ "$CONFIG_NET_VENDOR_SMC" = "y" ]; then
    tristate 'WD80*3 support' CONFIG_WD80x3
    tristate 'SMC Ultra support' CONFIG_ULTRA
    tristate 'SMC Ultra32 support' CONFIG_ULTRA32
    tristate 'SMC 9194 support' CONFIG_SMC9194
  fi
  bool 'PCI Ethernet adapters' CONFIG_NET_PCI
  if [ "$CONFIG_NET_PCI" = "y" ]; then
    tristate 'AMD PCI PCnet32 (PCI bus NE2100 cards) support' CONFIG_PCNET32
    tristate 'Intel EtherExpressPro PCI 10+/100B/100+ support' CONFIG_EEXPRESS_PRO100B
    tristate 'DE425, DE434, DE435, DE450, DE500 support' CONFIG_DE4X5
    tristate 'DECchip Tulip (dc21x4x) PCI support' CONFIG_DEC_ELCP
    tristate 'Digi Intl. RightSwitch SE-X support' CONFIG_DGRS
    tristate 'PCI NE2000 support' CONFIG_NE2K_PCI
    tristate 'Packet Engines Yellowfin Gigabit-NIC support' CONFIG_YELLOWFIN
    tristate 'RealTek 8129/8139 (not 8019/8029!) support' CONFIG_RTL8139
    tristate 'SMC EPIC/100 (EtherPower II) support' CONFIG_EPIC
    tristate 'TI ThunderLAN support' CONFIG_TLAN
    tristate 'VIA Rhine support' CONFIG_VIA_RHINE
  fi
  bool 'Other ISA cards' CONFIG_NET_ISA
  if [ "$CONFIG_NET_ISA" = "y" ]; then
    tristate 'AMD LANCE and PCnet (AT1500 and NE2100) support' CONFIG_LANCE
    tristate 'AT1700 (Fujitsu 86965) support' CONFIG_AT1700
    tristate 'Cabletron E21xx support' CONFIG_E2100
    tristate 'DEPCA, DE10x, DE200, DE201, DE202, DE422 support' CONFIG_DEPCA
    tristate 'EtherWORKS 3 (DE203, DE204, DE205) support' CONFIG_EWRK3
    tristate 'EtherExpress 16 support' CONFIG_EEXPRESS
    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      tristate 'EtherExpressPro support' CONFIG_EEXPRESS_PRO
      tristate 'FMV-181/182/183/184 support' CONFIG_FMV18X
    fi
    tristate 'HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS
    tristate 'HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN
    tristate 'HP 10/100VG PCLAN (ISA, EISA, PCI) support' CONFIG_HP100
    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      tristate 'ICL EtherTeam 16i/32 support' CONFIG_ETH16I
    fi
    tristate 'NE2000/NE1000 ISA support' CONFIG_NE2000
    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      tristate 'NI5210 support' CONFIG_NI52
      tristate 'NI6510 support' CONFIG_NI65
    fi
    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      bool 'SEEQ8005 support (EXPERIMENTAL)' CONFIG_SEEQ8005
    fi
    bool 'SK_G16 support' CONFIG_SK_G16
  fi
  bool 'EISA, VLB and other board controllers' CONFIG_NET_EISA
  if [ "$CONFIG_NET_EISA" = "y" ]; then
    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      tristate 'Ansel Communications EISA 3200 support (EXPERIMENTAL)' CONFIG_AC3200
    fi
    tristate 'Apricot Xen-II on board ethernet' CONFIG_APRICOT
    if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
      bool 'Zenith Z-Note support (EXPERIMENTAL)' CONFIG_ZNET
    fi
  fi
  bool 'Pocket and portable adaptors' CONFIG_NET_POCKET
  if [ "$CONFIG_NET_POCKET" = "y" ]; then
    tristate 'AT-LAN-TEC/RealTek pocket adaptor support' CONFIG_ATP
    tristate 'D-Link DE600 pocket adaptor support' CONFIG_DE600
    tristate 'D-Link DE620 pocket adaptor support' CONFIG_DE620
  fi
fi

bool 'Token Ring driver support' CONFIG_TR
if [ "$CONFIG_TR" = "y" ]; then
  tristate 'IBM Tropic chipset based adaptor support' CONFIG_IBMTR
fi
bool 'FDDI driver support' CONFIG_FDDI
if [ "$CONFIG_FDDI" = "y" ]; then
  bool 'Digital DEFEA and DEFPA adapter support' CONFIG_DEFXX
fi
tristate 'ARCnet support' CONFIG_ARCNET
if [ "$CONFIG_ARCNET" != "n" ]; then
  bool '  Enable arc0e (ARCnet "Ether-Encap" packet format)' CONFIG_ARCNET_ETH
  bool '  Enable arc0s (ARCnet RFC1051 packet format)' CONFIG_ARCNET_1051
fi

if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
  tristate 'Traffic Shaper (EXPERIMENTAL)' CONFIG_SHAPER
  tristate 'Red Creek Hardware VPN (EXPERIMENTAL)' CONFIG_RCPCI
fi