URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [net/] [open_eth.h] - Rev 1777
Go to most recent revision | Compare with Previous | Blame | View Log
/* Ethernet configuration registers */ typedef struct _oeth_regs { uint moder; /* Mode Register */ uint int_src; /* Interrupt Source Register */ uint int_mask; /* Interrupt Mask Register */ uint ipgt; /* Back to Bak Inter Packet Gap Register */ uint ipgr1; /* Non Back to Back Inter Packet Gap Register 1 */ uint ipgr2; /* Non Back to Back Inter Packet Gap Register 2 */ uint packet_len; /* Packet Length Register (min. and max.) */ uint collconf; /* Collision and Retry Configuration Register */ uint tx_bd_num; /* Transmit Buffer Descriptor Number Register */ uint ctrlmoder; /* Control Module Mode Register */ uint miimoder; /* MII Mode Register */ uint miicommand; /* MII Command Register */ uint miiaddress; /* MII Address Register */ uint miitx_data; /* MII Transmit Data Register */ uint miirx_data; /* MII Receive Data Register */ uint miistatus; /* MII Status Register */ uint mac_addr0; /* MAC Individual Address Register 0 */ uint mac_addr1; /* MAC Individual Address Register 1 */ uint hash_addr0; /* Hash Register 0 */ uint hash_addr1; /* Hash Register 1 */ } oeth_regs; /* Ethernet buffer descriptor */ typedef struct _oeth_bd { #if 0 ushort len; /* Buffer length */ ushort status; /* Buffer status */ #else uint len_status; #endif uint addr; /* Buffer address */ } oeth_bd; #define OETH_REG_BASE ETH_BASE_ADD #define OETH_BD_BASE (ETH_BASE_ADD + 0x400) #define OETH_TOTAL_BD 128 #define OETH_MAXBUF_LEN 0x600 /* Tx BD */ #define OETH_TX_BD_READY 0x8000 /* Tx BD Ready */ #define OETH_TX_BD_IRQ 0x4000 /* Tx BD IRQ Enable */ #define OETH_TX_BD_WRAP 0x2000 /* Tx BD Wrap (last BD) */ #define OETH_TX_BD_PAD 0x1000 /* Tx BD Pad Enable */ #define OETH_TX_BD_CRC 0x0800 /* Tx BD CRC Enable */ #define OETH_TX_BD_UNDERRUN 0x0100 /* Tx BD Underrun Status */ #define OETH_TX_BD_RETRY 0x00F0 /* Tx BD Retry Status */ #define OETH_TX_BD_RETLIM 0x0008 /* Tx BD Retransmission Limit Status */ #define OETH_TX_BD_LATECOL 0x0004 /* Tx BD Late Collision Status */ #define OETH_TX_BD_DEFER 0x0002 /* Tx BD Defer Status */ #define OETH_TX_BD_CARRIER 0x0001 /* Tx BD Carrier Sense Lost Status */ #define OETH_TX_BD_STATS (OETH_TX_BD_UNDERRUN | \ OETH_TX_BD_RETRY | \ OETH_TX_BD_RETLIM | \ OETH_TX_BD_LATECOL | \ OETH_TX_BD_DEFER | \ OETH_TX_BD_CARRIER) /* Rx BD */ #define OETH_RX_BD_EMPTY 0x8000 /* Rx BD Empty */ #define OETH_RX_BD_IRQ 0x4000 /* Rx BD IRQ Enable */ #define OETH_RX_BD_WRAP 0x2000 /* Rx BD Wrap (last BD) */ #define OETH_RX_BD_MISS 0x0080 /* Rx BD Miss Status */ #define OETH_RX_BD_OVERRUN 0x0040 /* Rx BD Overrun Status */ #define OETH_RX_BD_INVSIMB 0x0020 /* Rx BD Invalid Symbol Status */ #define OETH_RX_BD_DRIBBLE 0x0010 /* Rx BD Dribble Nibble Status */ #define OETH_RX_BD_TOOLONG 0x0008 /* Rx BD Too Long Status */ #define OETH_RX_BD_SHORT 0x0004 /* Rx BD Too Short Frame Status */ #define OETH_RX_BD_CRCERR 0x0002 /* Rx BD CRC Error Status */ #define OETH_RX_BD_LATECOL 0x0001 /* Rx BD Late Collision Status */ #define OETH_RX_BD_STATS (OETH_RX_BD_MISS | \ OETH_RX_BD_OVERRUN | \ OETH_RX_BD_INVSIMB | \ OETH_RX_BD_DRIBBLE | \ OETH_RX_BD_TOOLONG | \ OETH_RX_BD_SHORT | \ OETH_RX_BD_CRCERR | \ OETH_RX_BD_LATECOL) /* MODER Register */ #define OETH_MODER_RXEN 0x00000001 /* Receive Enable */ #define OETH_MODER_TXEN 0x00000002 /* Transmit Enable */ #define OETH_MODER_NOPRE 0x00000004 /* No Preamble */ #define OETH_MODER_BRO 0x00000008 /* Reject Broadcast */ #define OETH_MODER_IAM 0x00000010 /* Use Individual Hash */ #define OETH_MODER_PRO 0x00000020 /* Promiscuous (receive all) */ #define OETH_MODER_IFG 0x00000040 /* Min. IFG not required */ #define OETH_MODER_LOOPBCK 0x00000080 /* Loop Back */ #define OETH_MODER_NOBCKOF 0x00000100 /* No Backoff */ #define OETH_MODER_EXDFREN 0x00000200 /* Excess Defer */ #define OETH_MODER_FULLD 0x00000400 /* Full Duplex */ #define OETH_MODER_RST 0x00000800 /* Reset MAC */ #define OETH_MODER_DLYCRCEN 0x00001000 /* Delayed CRC Enable */ #define OETH_MODER_CRCEN 0x00002000 /* CRC Enable */ #define OETH_MODER_HUGEN 0x00004000 /* Huge Enable */ #define OETH_MODER_PAD 0x00008000 /* Pad Enable */ #define OETH_MODER_RECSMALL 0x00010000 /* Receive Small */ /* Interrupt Source Register */ #define OETH_INT_TXB 0x00000001 /* Transmit Buffer IRQ */ #define OETH_INT_TXE 0x00000002 /* Transmit Error IRQ */ #define OETH_INT_RXF 0x00000004 /* Receive Frame IRQ */ #define OETH_INT_RXE 0x00000008 /* Receive Error IRQ */ #define OETH_INT_BUSY 0x00000010 /* Busy IRQ */ #define OETH_INT_TXC 0x00000020 /* Transmit Control Frame IRQ */ #define OETH_INT_RXC 0x00000040 /* Received Control Frame IRQ */ /* Interrupt Mask Register */ #define OETH_INT_MASK_TXB 0x00000001 /* Transmit Buffer IRQ Mask */ #define OETH_INT_MASK_TXE 0x00000002 /* Transmit Error IRQ Mask */ #define OETH_INT_MASK_RXF 0x00000004 /* Receive Frame IRQ Mask */ #define OETH_INT_MASK_RXE 0x00000008 /* Receive Error IRQ Mask */ #define OETH_INT_MASK_BUSY 0x00000010 /* Busy IRQ Mask */ #define OETH_INT_MASK_TXC 0x00000020 /* Transmit Control Frame IRQ Mask */ #define OETH_INT_MASK_RXC 0x00000040 /* Received Control Frame IRQ Mask */ /* Control Module Mode Register */ #define OETH_CTRLMODER_PASSALL 0x00000001 /* Pass Control Frames */ #define OETH_CTRLMODER_RXFLOW 0x00000002 /* Receive Control Flow Enable */ #define OETH_CTRLMODER_TXFLOW 0x00000004 /* Transmit Control Flow Enable */ /* MII Mode Register */ #define OETH_MIIMODER_CLKDIV 0x000000FF /* Clock Divider */ #define OETH_MIIMODER_NOPRE 0x00000100 /* No Preamble */ #define OETH_MIIMODER_RST 0x00000200 /* MIIM Reset */ /* MII Command Register */ #define OETH_MIICOMMAND_SCANSTAT 0x00000001 /* Scan Status */ #define OETH_MIICOMMAND_RSTAT 0x00000002 /* Read Status */ #define OETH_MIICOMMAND_WCTRLDATA 0x00000004 /* Write Control Data */ /* MII Address Register */ #define OETH_MIIADDRESS_FIAD 0x0000001F /* PHY Address */ #define OETH_MIIADDRESS_RGAD 0x00001F00 /* RGAD Address */ /* MII Status Register */ #define OETH_MIISTATUS_LINKFAIL 0x00000001 /* Link Fail */ #define OETH_MIISTATUS_BUSY 0x00000002 /* MII Busy */ #define OETH_MIISTATUS_NVALID 0x00000004 /* Data in MII Status Register is invalid */
Go to most recent revision | Compare with Previous | Blame | View Log