URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [net/] [wavelan.p.h] - Rev 1772
Go to most recent revision | Compare with Previous | Blame | View Log
/* * Wavelan ISA driver * * Jean II - HPLB '96 * * Reorganisation and extension of the driver. * * This file contain all definition and declarations necessary for the * wavelan isa driver. This file is a private header, so it should * be included only on wavelan.c !!! */ #ifndef WAVELAN_P_H #define WAVELAN_P_H /************************** DOCUMENTATION **************************/ /* * This driver provide a Linux interface to the Wavelan ISA hardware * The Wavelan is a product of Lucent ("http://www.wavelan.com/"). * This division was formerly part of NCR and then AT&T. * Wavelan are also distributed by DEC (RoamAbout DS) and Digital Ocean. * * To know how to use this driver, read the NET3 HOWTO. * If you want to exploit the many other fonctionalities, look comments * in the code... * * This driver is the result of the effort of many peoples (see below). */ /* ------------------------ SPECIFIC NOTES ------------------------ */ /* * Web page * -------- * I try to maintain a web page with the Wireless LAN Howto at : * http://www-uk.hpl.hp.com/people/jt/Linux/Wavelan.html * * wavelan.o is darn too big * ------------------------- * That's true ! There is a very simple way to reduce the driver * object by 33% (yes !). Comment out the following line : * #include <linux/wireless.h> * * Debugging and options * --------------------- * You will find below a set of '#define" allowing a very fine control * on the driver behaviour and the debug messages printed. * * MAC address and hardware detection : * ---------------------------------- * The detection code of the wavelan chech that the first 3 * octets of the MAC address fit the company code. This type of * detection work well for AT&T cards (because the AT&T code is * hardcoded in wavelan.h), but of course will fail for other * manufacturer. * * If you are sure that your card is derived from the wavelan, * here is the way to configure it : * 1) Get your MAC address * a) With your card utilities (wfreqsel, instconf, ...) * b) With the driver : * o compile the kernel with DEBUG_CONFIG_INFO enabled * o Boot and look the card messages * 2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan.h) * 3) Compile & verify * 4) Send me the MAC code - I will include it in the next version... * */ /* --------------------- WIRELESS EXTENSIONS --------------------- */ /* * This driver is the first one to support "wireless extensions". * This set of extensions provide you some way to control the wireless * caracteristics of the hardware in a standard way and support for * applications for taking advantage of it (like Mobile IP). * * You will need to enable the CONFIG_NET_RADIO define in the kernel * configuration to enable the wireless extensions (this is the one * giving access to the radio network device choice). * * It might also be a good idea as well to fetch the wireless tools to * configure the device and play a bit. */ /* ---------------------------- FILES ---------------------------- */ /* * wavelan.c : The actual code for the driver - C functions * * wavelan.p.h : Private header : local types / vars for the driver * * wavelan.h : Description of the hardware interface & structs * * i82586.h : Description if the Ethernet controler */ /* --------------------------- HISTORY --------------------------- */ /* * (Made with information in drivers headers. It may not be accurate, * and I garantee nothing except my best effort...) * * The history of the Wavelan drivers is as complicated as history of * the Wavelan itself (NCR -> AT&T -> Lucent). * * All started with Anders Klemets <klemets@paul.rutgers.edu>, * writting a Wavelan ISA driver for the MACH microkernel. Girish * Welling <welling@paul.rutgers.edu> had also worked on it. * Keith Moore modify this for the Pcmcia hardware. * * Robert Morris <rtm@das.harvard.edu> port these two drivers to BSDI * and add specific Pcmcia support (there is currently no equivalent * of the PCMCIA package under BSD...). * * Jim Binkley <jrb@cs.pdx.edu> port both BSDI drivers to freeBSD. * * Bruce Janson <bruce@cs.usyd.edu.au> port the BSDI ISA driver to Linux. * * Anthony D. Joseph <adj@lcs.mit.edu> started modify Bruce driver * (with help of the BSDI PCMCIA driver) for PCMCIA. * Yunzhou Li <yunzhou@strat.iol.unh.edu> finished is work. * Joe Finney <joe@comp.lancs.ac.uk> patched the driver to start * correctly 2.00 cards (2.4 GHz with frequency selection). * David Hinds <dhinds@hyper.stanford.edu> integrated the whole in his * Pcmcia package (+ bug corrections). * * I (Jean Tourrilhes - jt@hplb.hpl.hp.com) then started to make some * patchs to the Pcmcia driver. After, I added code in the ISA driver * for Wireless Extensions and full support of frequency selection * cards. Then, I've done the same to the Pcmcia driver + some * reorganisation. Finally, I came back to the ISA driver to * upgrade it at the same level as the Pcmcia one and reorganise * the code * Loeke Brederveld <lbrederv@wavelan.com> from Lucent has given me * much needed informations on the Wavelan hardware. */ /* The original copyrights and litteratures mention others names and * credits. I don't know what there part in this development was... */ /* By the way : for the copyright & legal stuff : * Almost everybody wrote code under GNU or BSD license (or alike), * and want that their original copyright remain somewhere in the * code (for myself, I go with the GPL). * Nobody want to take responsibility for anything, except the fame... */ /* --------------------------- CREDITS --------------------------- */ /* * This software was developed as a component of the * Linux operating system. * It is based on other device drivers and information * either written or supplied by: * Ajay Bakre (bakre@paul.rutgers.edu), * Donald Becker (becker@cesdis.gsfc.nasa.gov), * Loeke Brederveld (Loeke.Brederveld@Utrecht.NCR.com), * Brent Elphick <belphick@uwaterloo.ca>, * Anders Klemets (klemets@it.kth.se), * Vladimir V. Kolpakov (w@stier.koenig.ru), * Marc Meertens (Marc.Meertens@Utrecht.NCR.com), * Pauline Middelink (middelin@polyware.iaf.nl), * Robert Morris (rtm@das.harvard.edu), * Jean Tourrilhes (jt@hplb.hpl.hp.com), * Girish Welling (welling@paul.rutgers.edu), * Clark Woodworth <clark@hiway1.exit109.com> * Yongguang Zhang <ygz@isl.hrl.hac.com>... * * Thanks go also to: * James Ashton (jaa101@syseng.anu.edu.au), * Alan Cox (iialan@iiit.swan.ac.uk), * Allan Creighton (allanc@cs.usyd.edu.au), * Matthew Geier (matthew@cs.usyd.edu.au), * Remo di Giovanni (remo@cs.usyd.edu.au), * Eckhard Grah (grah@wrcs1.urz.uni-wuppertal.de), * Vipul Gupta (vgupta@cs.binghamton.edu), * Mark Hagan (mhagan@wtcpost.daytonoh.NCR.COM), * Tim Nicholson (tim@cs.usyd.edu.au), * Ian Parkin (ian@cs.usyd.edu.au), * John Rosenberg (johnr@cs.usyd.edu.au), * George Rossi (george@phm.gov.au), * Arthur Scott (arthur@cs.usyd.edu.au), * Stanislav Sinyagin <stas@isf.ru> * Peter Storey, * for their assistance and advice. * * Additional Credits: * * My developpement has been done under Linux 2.0.x (Debian 1.1) with * an HP Vectra XP/60. * */ /* ------------------------- IMPROVEMENTS ------------------------- */ /* * I proudly present : * * Changes mades in first pre-release : * ---------------------------------- * - Reorganisation of the code, function name change * - Creation of private header (wavelan.p.h) * - Reorganised debug messages * - More comments, history, ... * - mmc_init : configure the PSA if not done * - mmc_init : correct default value of level threshold for pcmcia * - mmc_init : 2.00 detection better code for 2.00 init * - better info at startup * - irq setting (note : this setting is permanent...) * - Watchdog : change strategy (+ solve module removal problems) * - add wireless extensions (ioctl & get_wireless_stats) * get/set nwid/frequency on fly, info for /proc/net/wireless * - More wireless extension : SETSPY and GETSPY * - Make wireless extensions optional * - Private ioctl to set/get quality & level threshold, histogram * - Remove /proc/net/wavelan * - Supress useless stuff from lp (net_local) * - kernel 2.1 support (copy_to/from_user instead of memcpy_to/fromfs) * - Add message level (debug stuff in /var/adm/debug & errors not * displayed at console and still in /var/adm/messages) * - multi device support * - Start fixing the probe (init code) * - More inlines * - man page * - Lot of others minor details & cleanups * * Changes made in second pre-release : * ---------------------------------- * - Cleanup init code (probe & module init) * - Better multi device support (module) * - name assignement (module) * * Changes made in third pre-release : * --------------------------------- * - Be more conservative on timers * - Preliminary support for multicast (I still lack some details...) * * Changes made in fourth pre-release : * ---------------------------------- * - multicast (revisited and finished) * - Avoid reset in set_multicast_list (a really big hack) * if somebody could apply this code for other i82586 based driver... * - Share on board memory 75% RU / 25% CU (instead of 50/50) * * Changes made for release in 2.1.15 : * ---------------------------------- * - Change the detection code for multi manufacturer code support * * Changes made for release in 2.1.17 : * ---------------------------------- * - Update to wireless extensions changes * - Silly bug in card initial configuration (psa_conf_status) * * Changes made for release in 2.1.27 & 2.0.30 : * ------------------------------------------- * - Small bug in debug code (probably not the last one...) * - Remove extern kerword for wavelan_probe() * - Level threshold is now a standard wireless extension (version 4 !) * * Changes made for release in 2.1.36 : * ---------------------------------- * - Encryption setting from Brent Elphick (thanks a lot !) * - 'ioaddr' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin) * * Other changes (not by me) : * ------------------------- * - Spelling and gramar "rectification". * * Changes made for release in 2.0.37 & 2.2.2 : * ------------------------------------------ * - Correct status in /proc/net/wireless * - Set PSA CRC to make PtP diagnostic tool happy (Bob Gray) * - Module init code don't fail if we found at least one card in * the address list (Karlis Peisenieks) * - Missing parenthesis (Christopher Peterson) * - Correct i82586 configuration parameters * - Encryption initialisation bug (Robert McCormack) * - New mac addresses detected in the probe * - Increase watchdog for busy envirnoments * * Wishes & dreams : * --------------- * - Roaming */ /***************************** INCLUDES *****************************/ #include <linux/module.h> #include <linux/kernel.h> #include <linux/sched.h> #include <linux/types.h> #include <linux/fcntl.h> #include <linux/interrupt.h> #include <linux/stat.h> #include <linux/ptrace.h> #include <linux/ioport.h> #include <linux/in.h> #include <linux/string.h> #include <linux/delay.h> #include <asm/system.h> #include <asm/bitops.h> #include <asm/io.h> #include <asm/dma.h> #include <linux/errno.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> #include <linux/skbuff.h> #include <linux/malloc.h> #include <linux/timer.h> #include <linux/wireless.h> /* Wireless extensions */ /* Wavelan declarations */ #include "i82586.h" #include "wavelan.h" /****************************** DEBUG ******************************/ #undef DEBUG_MODULE_TRACE /* Module insertion/removal */ #undef DEBUG_CALLBACK_TRACE /* Calls made by Linux */ #undef DEBUG_INTERRUPT_TRACE /* Calls to handler */ #undef DEBUG_INTERRUPT_INFO /* type of interrupt & so on */ #define DEBUG_INTERRUPT_ERROR /* problems */ #undef DEBUG_CONFIG_TRACE /* Trace the config functions */ #undef DEBUG_CONFIG_INFO /* What's going on... */ #define DEBUG_CONFIG_ERRORS /* Errors on configuration */ #undef DEBUG_TX_TRACE /* Transmission calls */ #undef DEBUG_TX_INFO /* Header of the transmited packet */ #define DEBUG_TX_ERROR /* unexpected conditions */ #undef DEBUG_RX_TRACE /* Transmission calls */ #undef DEBUG_RX_INFO /* Header of the transmited packet */ #define DEBUG_RX_ERROR /* unexpected conditions */ #undef DEBUG_PACKET_DUMP 16 /* Dump packet on the screen */ #undef DEBUG_IOCTL_TRACE /* Misc call by Linux */ #undef DEBUG_IOCTL_INFO /* Various debug info */ #define DEBUG_IOCTL_ERROR /* What's going wrong */ #define DEBUG_BASIC_SHOW /* Show basic startup info */ #undef DEBUG_VERSION_SHOW /* Print version info */ #undef DEBUG_PSA_SHOW /* Dump psa to screen */ #undef DEBUG_MMC_SHOW /* Dump mmc to screen */ #undef DEBUG_SHOW_UNUSED /* Show also unused fields */ #undef DEBUG_I82586_SHOW /* Show i82586 status */ #undef DEBUG_DEVICE_SHOW /* Show device parameters */ /* Options : */ #define USE_PSA_CONFIG /* Use info from the PSA */ #define SET_PSA_CRC /* Calculate and set the CRC on PSA */ #define IGNORE_NORMAL_XMIT_ERRS /* Don't bother with normal conditions */ #undef STRUCT_CHECK /* Verify padding of structures */ #undef OLDIES /* Old code (to redo) */ #undef RECORD_SNR /* To redo */ #undef EEPROM_IS_PROTECTED /* Doesn't seem to be necessary */ #define MULTICAST_AVOID /* Avoid extra multicast (I'm sceptical) */ #ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */ /* Warning : these stuff will slow down the driver... */ #define WIRELESS_SPY /* Enable spying addresses */ #undef HISTOGRAM /* Enable histogram of sig level... */ #endif /************************ CONSTANTS & MACROS ************************/ #ifdef DEBUG_VERSION_SHOW static const char *version = "wavelan.c : v18 (wireless extensions) 18/2/99\n"; #endif /* Watchdog temporisation */ #define WATCHDOG_JIFFIES 256 /* TODO: express in HZ. */ /* Macro to get the number of elements in an array */ #define NELS(a) (sizeof(a) / sizeof(a[0])) /* ------------------------ PRIVATE IOCTL ------------------------ */ #define SIOCSIPQTHR SIOCDEVPRIVATE /* Set quality threshold */ #define SIOCGIPQTHR SIOCDEVPRIVATE + 1 /* Get quality threshold */ #define SIOCSIPLTHR SIOCDEVPRIVATE + 2 /* Set level threshold */ #define SIOCGIPLTHR SIOCDEVPRIVATE + 3 /* Get level threshold */ #define SIOCSIPHISTO SIOCDEVPRIVATE + 6 /* Set histogram ranges */ #define SIOCGIPHISTO SIOCDEVPRIVATE + 7 /* Get histogram values */ /* ----------------------- VERSION SUPPORT ----------------------- */ /* This ugly patch is needed to cope with old version of the kernel */ #ifndef copy_from_user #define copy_from_user memcpy_fromfs #define copy_to_user memcpy_tofs #endif /****************************** TYPES ******************************/ /* Shortcuts */ typedef struct device device; typedef struct enet_statistics en_stats; typedef struct iw_statistics iw_stats; typedef struct iw_quality iw_qual; typedef struct iw_freq iw_freq; typedef struct net_local net_local; typedef struct timer_list timer_list; /* Basic types */ typedef u_char mac_addr[WAVELAN_ADDR_SIZE]; /* Hardware address */ /* * Static specific data for the interface. * * For each network interface, Linux keep data in two structure. "device" * keep the generic data (same format for everybody) and "net_local" keep * the additional specific data. * Note that some of this specific data is in fact generic (en_stats, for * example). */ struct net_local { net_local * next; /* Linked list of the devices */ device * dev; /* Reverse link... */ en_stats stats; /* Ethernet interface statistics */ int nresets; /* Number of hw resets */ u_char reconfig_82586; /* Need to reconfigure the controler */ u_char promiscuous; /* Promiscuous mode */ int mc_count; /* Number of multicast addresses */ timer_list watchdog; /* To avoid blocking state */ u_short hacr; /* Current host interface state */ int tx_n_in_use; u_short rx_head; u_short rx_last; u_short tx_first_free; u_short tx_first_in_use; #ifdef WIRELESS_EXT iw_stats wstats; /* Wireless specific stats */ #endif #ifdef WIRELESS_SPY int spy_number; /* Number of addresses to spy */ mac_addr spy_address[IW_MAX_SPY]; /* The addresses to spy */ iw_qual spy_stat[IW_MAX_SPY]; /* Statistics gathered */ #endif /* WIRELESS_SPY */ #ifdef HISTOGRAM int his_number; /* Number of intervals */ u_char his_range[16]; /* Boundaries of interval ]n-1; n] */ u_long his_sum[16]; /* Sum in interval */ #endif /* HISTOGRAM */ }; /**************************** PROTOTYPES ****************************/ /* ----------------------- MISC SUBROUTINES ------------------------ */ static inline unsigned long /* flags */ wv_splhi(void); /* Disable interrupts */ static inline void wv_splx(unsigned long); /* ReEnable interrupts : flags */ static u_char wv_irq_to_psa(int); static int wv_psa_to_irq(u_char); /* ------------------- HOST ADAPTER SUBROUTINES ------------------- */ static inline u_short /* data */ hasr_read(u_long); /* Read the host interface : base address */ static inline void hacr_write(u_long, /* Write to host interface : base address */ u_short), /* data */ hacr_write_slow(u_long, u_short), set_chan_attn(u_long, /* ioaddr */ u_short), /* hacr */ wv_hacr_reset(u_long), /* ioaddr */ wv_16_off(u_long, /* ioaddr */ u_short), /* hacr */ wv_16_on(u_long, /* ioaddr */ u_short), /* hacr */ wv_ints_off(device *), wv_ints_on(device *); /* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */ static void psa_read(u_long, /* Read the Parameter Storage Area */ u_short, /* hacr */ int, /* offset in PSA */ u_char *, /* buffer to fill */ int), /* size to read */ psa_write(u_long, /* Write to the PSA */ u_short, /* hacr */ int, /* Offset in psa */ u_char *, /* Buffer in memory */ int); /* Length of buffer */ static inline void mmc_out(u_long, /* Write 1 byte to the Modem Manag Control */ u_short, u_char), mmc_write(u_long, /* Write n bytes to the MMC */ u_char, u_char *, int); static inline u_char /* Read 1 byte from the MMC */ mmc_in(u_long, u_short); static inline void mmc_read(u_long, /* Read n bytes from the MMC */ u_char, u_char *, int), fee_wait(u_long, /* Wait for frequency EEprom : base address */ int, /* Base delay to wait for */ int); /* Number of time to wait */ static void fee_read(u_long, /* Read the frequency EEprom : base address */ u_short, /* destination offset */ u_short *, /* data buffer */ int); /* number of registers */ /* ---------------------- I82586 SUBROUTINES ----------------------- */ static /*inline*/ void obram_read(u_long, /* ioaddr */ u_short, /* o */ u_char *, /* b */ int); /* n */ static inline void obram_write(u_long, /* ioaddr */ u_short, /* o */ u_char *, /* b */ int); /* n */ static void wv_ack(device *); static inline int wv_synchronous_cmd(device *, const char *), wv_config_complete(device *, u_long, net_local *); static int wv_complete(device *, u_long, net_local *); static inline void wv_82586_reconfig(device *); /* ------------------- DEBUG & INFO SUBROUTINES ------------------- */ #ifdef DEBUG_I82586_SHOW static void wv_scb_show(unsigned short); #endif static inline void wv_init_info(device *); /* display startup info */ /* ------------------- IOCTL, STATS & RECONFIG ------------------- */ static en_stats * wavelan_get_stats(device *); /* Give stats /proc/net/dev */ static void wavelan_set_multicast_list(device *); /* ----------------------- PACKET RECEPTION ----------------------- */ static inline void wv_packet_read(device *, /* Read a packet from a frame */ u_short, int), wv_receive(device *); /* Read all packets waiting */ /* --------------------- PACKET TRANSMISSION --------------------- */ static inline void wv_packet_write(device *, /* Write a packet to the Tx buffer */ void *, short); static int wavelan_packet_xmit(struct sk_buff *, /* Send a packet */ device *); /* -------------------- HARDWARE CONFIGURATION -------------------- */ static inline int wv_mmc_init(device *), /* Initialize the modem */ wv_ru_start(device *), /* Start the i82586 receiver unit */ wv_cu_start(device *), /* Start the i82586 command unit */ wv_82586_start(device *); /* Start the i82586 */ static void wv_82586_config(device *); /* Configure the i82586 */ static inline void wv_82586_stop(device *); static int wv_hw_reset(device *), /* Reset the wavelan hardware */ wv_check_ioaddr(u_long, /* ioaddr */ u_char *); /* mac address (read) */ /* ---------------------- INTERRUPT HANDLING ---------------------- */ static void wavelan_interrupt(int, /* Interrupt handler */ void *, struct pt_regs *); static void wavelan_watchdog(u_long); /* Transmission watchdog */ /* ------------------- CONFIGURATION CALLBACKS ------------------- */ static int wavelan_open(device *), /* Open the device */ wavelan_close(device *), /* Close the device */ wavelan_config(device *); /* Configure one device */ extern int wavelan_probe(device *); /* See Space.c */ /**************************** VARIABLES ****************************/ /* * This is the root of the linked list of wavelan drivers * It is use to verify that we don't reuse the same base address * for two differents drivers and to make the cleanup when * removing the module. */ static net_local * wavelan_list = (net_local *) NULL; /* * This table is used to translate the psa value to irq number * and vice versa... */ static u_char irqvals[] = { 0, 0, 0, 0x01, 0x02, 0x04, 0, 0x08, 0, 0, 0x10, 0x20, 0x40, 0, 0, 0x80, }; /* * Table of the available i/o address (base address) for wavelan */ static unsigned short iobase[] = { #if 0 /* Leave out 0x3C0 for now -- seems to clash with some video * controllers. * Leave out the others too -- we will always use 0x390 and leave * 0x300 for the Ethernet device. * Jean II : 0x3E0 is really fine as well... */ 0x300, 0x390, 0x3E0, 0x3C0 #endif /* 0 */ 0x390, 0x3E0 }; #ifdef MODULE /* Name of the devices (memory allocation) */ static char devname[4][IFNAMSIZ] = { "", "", "", "" }; /* Parameters set by insmod */ static int io[4] = { 0, 0, 0, 0 }; static int irq[4] = { 0, 0, 0, 0 }; static char * name[4] = { devname[0], devname[1], devname[2], devname[3] }; #endif /* MODULE */ #endif /* WAVELAN_P_H */
Go to most recent revision | Compare with Previous | Blame | View Log