URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [scsi/] [README.qlogicisp] - Rev 1765
Compare with Previous | Blame | View Log
Notes for the QLogic ISP1020 PCI SCSI Driver:
This driver works well in practice, but does not support disconnect/
reconnect, which makes using it with tape drives impractical.
It should work for most host adaptors with the ISP1020 chip. The
QLogic Corporation produces several PCI SCSI adapters which should
work:
* IQ-PCI
* IQ-PCI-10
* IQ-PCI-D
This driver may work with boards containing the ISP1020A or ISP1040A
chips, but that has not been tested.
This driver will NOT work with:
* ISA or VL Bus Qlogic cards (they use the 'qlogicfas' driver)
* PCI-basic (it uses the 'am53c974' driver)
Much thanks to QLogic's tech support for providing the latest ISP1020
firmware, and for taking the time to review my code.
Erik Moe
ehm@cris.com
Revised:
Michael A. Griffith
grif@cs.ucr.edu