OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [scsi/] [advansys.h] - Rev 1765

Compare with Previous | Blame | View Log

/* $Id: advansys.h,v 1.1 2005-12-20 10:17:45 jcastillo Exp $ */
 
/*
 * advansys.h - Linux Host Driver for AdvanSys SCSI Adapters
 * 
 * Copyright (c) 1995-1998 Advanced System Products, Inc.
 * All Rights Reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that redistributions of source
 * code retain the above copyright notice and this comment without
 * modification.
 *
 * There is an AdvanSys Linux WWW page at:
 *  http://www.advansys.com/linux.html
 *
 * The latest version of the AdvanSys driver is available at:
 *  ftp://ftp.advansys.com/pub/linux
 *
 * Please send questions, comments, bug reports to:
 *  bobf@advansys.com (Bob Frey)
 */
 
#ifndef _ADVANSYS_H
#define _ADVANSYS_H
 
/* Convert Linux Version, Patch-level, Sub-level to LINUX_VERSION_CODE. */
#define ASC_LINUX_VERSION(V, P, S)    (((V) * 65536) + ((P) * 256) + (S))
 
#ifndef LINUX_VERSION_CODE
#include <linux/version.h>
#endif /* LINUX_VERSION_CODE */
 
/*
 * Scsi_Host_Template function prototypes.
 */
int advansys_detect(Scsi_Host_Template *);
int advansys_release(struct Scsi_Host *);
const char *advansys_info(struct Scsi_Host *);
int advansys_command(Scsi_Cmnd *);
int advansys_queuecommand(Scsi_Cmnd *, void (* done)(Scsi_Cmnd *));
int advansys_abort(Scsi_Cmnd *);
#if LINUX_VERSION_CODE < ASC_LINUX_VERSION(1,3,89)
int advansys_reset(Scsi_Cmnd *);
#else /* version >= v1.3.89 */
int advansys_reset(Scsi_Cmnd *, unsigned int);
#endif /* version >= v1.3.89 */
#if LINUX_VERSION_CODE < ASC_LINUX_VERSION(1,3,0)
int advansys_biosparam(Disk *, int, int[]);
#else /* version >= v1.3.0 */
int advansys_biosparam(Disk *, kdev_t, int[]);
extern struct proc_dir_entry proc_scsi_advansys;
int advansys_proc_info(char *, char **, off_t, int, int, int);
#endif /* version >= v1.3.0 */
 
/* init/main.c setup function */
void advansys_setup(char *, int *);
 
/*
 * AdvanSys Host Driver Scsi_Host_Template (struct SHT) from hosts.h.
 */
#if LINUX_VERSION_CODE < ASC_LINUX_VERSION(1,3,0)
#define ADVANSYS { \
    NULL,                     /* struct SHT *next */ \
    NULL,                     /* int *usage_count */ \
    "advansys",               /* char *name */ \
    advansys_detect,          /* int (*detect)(struct SHT *) */ \
    advansys_release,         /* int (*release)(struct Scsi_Host *) */ \
    advansys_info,            /* const char *(*info)(struct Scsi_Host *) */ \
    advansys_command,         /* int (*command)(Scsi_Cmnd *) */ \
    advansys_queuecommand, \
            /* int (*queuecommand)(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *)) */ \
    advansys_abort,           /* int (*abort)(Scsi_Cmnd *) */ \
    advansys_reset,           /* int (*reset)(Scsi_Cmnd *) */ \
    NULL,                     /* int (*slave_attach)(int, int) */ \
    advansys_biosparam,       /* int (* bios_param)(Disk *, int, int []) */ \
    /* \
     * The following fields are set per adapter in advansys_detect(). \
     */ \
    0,                        /* int can_queue */ \
    0,                        /* int this_id */ \
    0,                        /* short unsigned int sg_tablesize */ \
    0,                        /* short cmd_per_lun */ \
    0,                        /* unsigned char present */    \
    /* \
     * Because the driver may control an ISA adapter 'unchecked_isa_dma' \
     * must be set. The flag will be cleared in advansys_detect for non-ISA \
     * adapters. Refer to the comment in scsi_module.c for more information. \
     */ \
    1,                        /* unsigned unchecked_isa_dma:1 */ \
    /* \
     * All adapters controlled by this driver are capable of large \
     * scatter-gather lists. According to the mid-level SCSI documentation \
     * this obviates any performance gain provided by setting \
     * 'use_clustering'. But empirically while CPU utilization is increased \
     * by enabling clustering, I/O throughput increases as well. \
     */ \
    ENABLE_CLUSTERING,        /* unsigned use_clustering:1 */ \
}
#elif LINUX_VERSION_CODE < ASC_LINUX_VERSION(2,1,75)
#define ADVANSYS { \
    NULL,                    /* struct SHT *next */ \
    NULL, \
        /* version < v2.1.23 long *usage_count */ \
        /* version >= v2.1.23 struct module * */ \
    &proc_scsi_advansys,     /* struct proc_dir_entry *proc_dir */ \
    advansys_proc_info,    \
        /* int (*proc_info)(char *, char **, off_t, int, int, int) */ \
    "advansys",              /* const char *name */ \
    advansys_detect,         /* int (*detect)(struct SHT *) */ \
    advansys_release,        /* int (*release)(struct Scsi_Host *) */ \
    advansys_info,           /* const char *(*info)(struct Scsi_Host *) */ \
    advansys_command,        /* int (*command)(Scsi_Cmnd *) */ \
    advansys_queuecommand, \
        /* int (*queuecommand)(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *)) */ \
    advansys_abort,          /* int (*abort)(Scsi_Cmnd *) */ \
    advansys_reset, \
        /* version < v1.3.89 int (*reset)(Scsi_Cmnd *) */ \
        /* version >= v1.3.89 int (*reset)(Scsi_Cmnd *, unsigned int) */ \
    NULL,                    /* int (*slave_attach)(int, int) */ \
    advansys_biosparam,      /* int (* bios_param)(Disk *, kdev_t, int []) */ \
    /* \
     * The following fields are set per adapter in advansys_detect(). \
     */ \
    0,                        /* int can_queue */ \
    0,                        /* int this_id */ \
    0,                        /* short unsigned int sg_tablesize */ \
    0,                        /* short cmd_per_lun */ \
    0,                        /* unsigned char present */    \
    /* \
     * Because the driver may control an ISA adapter 'unchecked_isa_dma' \
     * must be set. The flag will be cleared in advansys_detect for non-ISA \
     * adapters. Refer to the comment in scsi_module.c for more information. \
     */ \
    1,                        /* unsigned unchecked_isa_dma:1 */ \
    /* \
     * All adapters controlled by this driver are capable of large \
     * scatter-gather lists. According to the mid-level SCSI documentation \
     * this obviates any performance gain provided by setting \
     * 'use_clustering'. But empirically while CPU utilization is increased \
     * by enabling clustering, I/O throughput increases as well. \
     */ \
    ENABLE_CLUSTERING,        /* unsigned use_clustering:1 */ \
}
#else /* version >= v2.1.75 */
#define ADVANSYS { \
    proc_dir:     &proc_scsi_advansys, \
    proc_info:    advansys_proc_info, \
    name:         "advansys", \
    detect:       advansys_detect, \
    release:      advansys_release, \
    info:         advansys_info, \
    command:      advansys_command, \
    queuecommand: advansys_queuecommand, \
    abort:        advansys_abort, \
    reset:        advansys_reset, \
    bios_param:    advansys_biosparam, \
    /* \
     * Because the driver may control an ISA adapter 'unchecked_isa_dma' \
     * must be set. The flag will be cleared in advansys_detect for non-ISA \
     * adapters. Refer to the comment in scsi_module.c for more information. \
     */ \
    unchecked_isa_dma: 1, \
    /* \
     * All adapters controlled by this driver are capable of large \
     * scatter-gather lists. According to the mid-level SCSI documentation \
     * this obviates any performance gain provided by setting \
     * 'use_clustering'. But empirically while CPU utilization is increased \
     * by enabling clustering, I/O throughput increases as well. \
     */ \
    use_clustering: ENABLE_CLUSTERING, \
}
#endif /* version >= v2.1.75 */
#endif /* _ADVANSYS_H */
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.