OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [scsi/] [eata_pio_proc.c] - Rev 1765

Compare with Previous | Blame | View Log

 
/*
 * eata_set_info
 * buffer : pointer to the data that has been written to the hostfile
 * length : number of bytes written to the hostfile
 * HBA_ptr: pointer to the Scsi_Host struct
 */
int eata_pio_set_info(char *buffer, int length, struct Scsi_Host *HBA_ptr)
{
    DBG(DBG_PROC_WRITE, printk("%s\n", buffer));
    return(-ENOSYS);  /* Currently this is a no-op */
}
 
/*
 * eata_proc_info
 * inout : decides on the direction of the dataflow and the meaning of the 
 *         variables
 * buffer: If inout==FALSE data is being written to it else read from it
 * *start: If inout==FALSE start of the valid data in the buffer
 * offset: If inout==FALSE offset from the beginning of the imaginary file 
 *         from which we start writing into the buffer
 * length: If inout==FALSE max number of bytes to be written into the buffer 
 *         else number of bytes in the buffer
 */
int eata_pio_proc_info(char *buffer, char **start, off_t offset, int length, 
		       int hostno, int inout)
{
 
    Scsi_Device *scd;
    struct Scsi_Host *HBA_ptr;
    static u8 buff[512];
    int i; 
    int   size, len = 0;
    off_t begin = 0;
    off_t pos = 0;
 
    HBA_ptr = first_HBA;
    for (i = 1; i <= registered_HBAs; i++) {
	if (HBA_ptr->host_no == hostno)
	    break;
	HBA_ptr = SD(HBA_ptr)->next;
    }        
 
    if(inout == TRUE) /* Has data been written to the file ? */ 
	return(eata_pio_set_info(buffer, length, HBA_ptr));
 
    if (offset == 0)
	memset(buff, 0, sizeof(buff));
 
    size = sprintf(buffer+len, "EATA (Extended Attachment) PIO driver version: "
		   "%d.%d%s\n",VER_MAJOR, VER_MINOR, VER_SUB);
    len += size; pos = begin + len;
    size = sprintf(buffer + len, "queued commands:     %10ld\n"
		   "processed interrupts:%10ld\n", queue_counter, int_counter);
    len += size; pos = begin + len;
 
    size = sprintf(buffer + len, "\nscsi%-2d: HBA %.10s\n",
		   HBA_ptr->host_no, SD(HBA_ptr)->name);
    len += size; 
    pos = begin + len;
    size = sprintf(buffer + len, "Firmware revision: v%s\n", 
		   SD(HBA_ptr)->revision);
    len += size;
    pos = begin + len;
    size = sprintf(buffer + len, "IO: PIO\n");
    len += size; 
    pos = begin + len;
    size = sprintf(buffer + len, "Base IO : %#.4x\n", (u32) HBA_ptr->base);
    len += size; 
    pos = begin + len;
    size = sprintf(buffer + len, "Host Bus: %s\n", 
		   (SD(HBA_ptr)->bustype == 'P')?"PCI ":
		   (SD(HBA_ptr)->bustype == 'E')?"EISA":"ISA ");
 
    len += size; 
    pos = begin + len;
 
    if (pos < offset) {
	len = 0;
	begin = pos;
    }
    if (pos > offset + length)
	goto stop_output;
 
    scd = scsi_devices;
 
    size = sprintf(buffer+len,"Attached devices: %s\n", (scd)?"":"none");
    len += size; 
    pos = begin + len;
 
    while (scd) {
	if (scd->host == HBA_ptr) {
	    proc_print_scsidevice(scd, buffer, &size, len);
	    len += size; 
	    pos = begin + len;
 
	    if (pos < offset) {
		len = 0;
		begin = pos;
	    }
	    if (pos > offset + length)
		goto stop_output;
	}
	scd = scd->next;
    }
 
 stop_output:
    DBG(DBG_PROC, printk("2pos: %ld offset: %ld len: %d\n", pos, offset, len));
    *start=buffer+(offset-begin);   /* Start of wanted data */
    len-=(offset-begin);            /* Start slop */
    if(len>length)
	len = length;               /* Ending slop */
    DBG(DBG_PROC, printk("3pos: %ld offset: %ld len: %d\n", pos, offset, len));
 
    return (len);     
}
 
/*
 * Overrides for Emacs so that we follow Linus's tabbing style.
 * Emacs will notice this stuff at the end of the file and automatically
 * adjust the settings for this buffer only.  This must remain at the end
 * of the file.
 * ---------------------------------------------------------------------------
 * Local variables:
 * c-indent-level: 4
 * c-brace-imaginary-offset: 0
 * c-brace-offset: -4
 * c-argdecl-indent: 4
 * c-label-offset: -4
 * c-continued-statement-offset: 4
 * c-continued-brace-offset: 0
 * tab-width: 8
 * End:
 */
 
 

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.