Subversion Repositories or1k

#ifndef __MEGARAID_H__
#define __MEGARAID_H__
 
#ifndef LINUX_VERSION_CODE
#include <linux/version.h>
#endif
 
#define IN_ISR                  0x80000000L
#define NO_INTR                 0x40000000L
#define IN_TIMEOUT              0x20000000L
#define PENDING                 0x10000000L
#define BOARD_QUARTZ            0x08000000L
 
#define SCB_ACTIVE 0x1
#define SCB_WAITQ  0x2
#define SCB_ISSUED 0x4
 
#define SCB_FREE                -1
#define SCB_RESET               -2
#define SCB_ABORT               -3
#define SCB_LOCKED              -4
 
#define MEGA_CMD_TIMEOUT        10
 
#define MAX_SGLIST              17
#define MAX_COMMANDS            254
 
#define MAX_LOGICAL_DRIVES      8
#define MAX_CHANNEL             5
#define MAX_TARGET              15
#define MAX_PHYSICAL_DRIVES     MAX_CHANNEL*MAX_TARGET
 
#define INQUIRY_DATA_SIZE       0x24
#define MAX_CDB_LEN             0x0A
#define MAX_REQ_SENSE_LEN       0x20
 
#define INTR_VALID              0x40
 
/* Mailbox commands */
#define MEGA_MBOXCMD_LREAD      0x01
#define MEGA_MBOXCMD_LWRITE     0x02
#define MEGA_MBOXCMD_PASSTHRU   0x03
#define MEGA_MBOXCMD_ADAPTERINQ 0x05
 
/* Offsets into Mailbox */
#define COMMAND_PORT       0x00
#define COMMAND_ID_PORT    0x01
#define SG_LIST_PORT0      0x08
#define SG_LIST_PORT1      0x09
#define SG_LIST_PORT2      0x0a
#define SG_LIST_PORT3      0x0b
#define SG_ELEMENT_PORT    0x0d
#define NO_FIRED_PORT      0x0f
 
/* I/O Port offsets */
#define I_CMD_PORT         0x00
#define I_ACK_PORT         0x00
#define I_TOGGLE_PORT      0x01
#define INTR_PORT          0x0a
 
#define MAILBOX_SIZE       70
#define MBOX_BUSY_PORT     0x00
#define MBOX_PORT0         0x04
#define MBOX_PORT1         0x05
#define MBOX_PORT2         0x06
#define MBOX_PORT3         0x07
#define ENABLE_MBOX_REGION 0x0B
 
/* I/O Port Values */
#define ISSUE_BYTE         0x10
#define ACK_BYTE           0x08
#define ENABLE_INTR_BYTE   0xc0
#define DISABLE_INTR_BYTE  0x00
#define VALID_INTR_BYTE    0x40
#define MBOX_BUSY_BYTE     0x10
#define ENABLE_MBOX_BYTE   0x00
 
/* Setup some port macros here */
#define WRITE_MAILBOX(base,offset,value)   *(base+offset)=value
#define READ_MAILBOX(base,offset)          *(base+offset)
 
#define WRITE_PORT(base,offset,value)      outb_p(value,base+offset)
#define READ_PORT(base,offset)             inb_p(base+offset)
 
#define ISSUE_COMMAND(base)   WRITE_PORT(base,I_CMD_PORT,ISSUE_BYTE)
#define CLEAR_INTR(base)      WRITE_PORT(base,I_ACK_PORT,ACK_BYTE)
#define ENABLE_INTR(base)     WRITE_PORT(base,I_TOGGLE_PORT,ENABLE_INTR_BYTE)
#define DISABLE_INTR(base)    WRITE_PORT(base,I_TOGGLE_PORT,DISABLE_INTR_BYTE)
 
/* Define AMI's PCI codes */
#undef PCI_VENDOR_ID_AMI
#undef PCI_DEVICE_ID_AMI_MEGARAID
 
#ifndef PCI_VENDOR_ID_AMI
#define PCI_VENDOR_ID_AMI          0x101E
#define PCI_DEVICE_ID_AMI_MEGARAID 0x9010
#endif
 
#define PCI_CONF_BASE_ADDR_OFFSET  0x10
#define PCI_CONF_IRQ_OFFSET        0x3c
#define PCI_CONF_AMISIG            0xa0
#define AMI_SIGNATURE              0x11223344
 
#if LINUX_VERSION_CODE < 0x20100
#define MEGARAID \
  { NULL,                               /* Next                      */\
    NULL,                               /* Usage Count Pointer       */\
    NULL,                               /* /proc Directory Entry     */\
    megaraid_proc_info,                 /* /proc Info Function       */\
    "MegaRAID",                         /* Driver Name               */\
    megaraid_detect,                    /* Detect Host Adapter       */\
    megaraid_release,                   /* Release Host Adapter      */\
    megaraid_info,                      /* Driver Info Function      */\
    megaraid_command,                   /* Command Function          */\
    megaraid_queue,                     /* Queue Command Function    */\
    megaraid_abort,                     /* Abort Command Function    */\
    megaraid_reset,                     /* Reset Command Function    */\
    NULL,                               /* Slave Attach Function     */\
    megaraid_biosparam,                 /* Disk BIOS Parameters      */\
    254,                                /* # of cmds that can be\
                                           outstanding at any time */\
    7,                                  /* HBA Target ID             */\
    MAX_SGLIST,                         /* Scatter/Gather Table Size */\
    64,                                 /* SCSI Commands per LUN     */\
    0,                                  /* Present                   */\
    0,                                  /* Default Unchecked ISA DMA */\
    ENABLE_CLUSTERING }		/* Enable Clustering         */
#else
#define MEGARAID \
  {\
    name:            "MegaRAID",               /* Driver Name               */\
    proc_info:        megaraid_proc_info,      /* /proc driver info         */\
    detect:           megaraid_detect,         /* Detect Host Adapter       */\
    release:          megaraid_release,        /* Release Host Adapter      */\
    info:             megaraid_info,           /* Driver Info Function      */\
    command:          megaraid_command,        /* Command Function          */\
    queuecommand:     megaraid_queue,          /* Queue Command Function    */\
    abort:            megaraid_abort,          /* Abort Command Function    */\
    reset:            megaraid_reset,          /* Reset Command Function    */\
    bios_param:       megaraid_biosparam,      /* Disk BIOS Parameters      */\
    can_queue:        254,                     /* Can Queue                 */\
    this_id:          7,                       /* HBA Target ID             */\
    sg_tablesize:     MAX_SGLIST,              /* Scatter/Gather Table Size */\
    cmd_per_lun:      64,                      /* SCSI Commands per LUN     */\
    present:          0,                       /* Present                   */\
    unchecked_isa_dma:0,                       /* Default Unchecked ISA DMA */\
    use_clustering:   ENABLE_CLUSTERING       /* Enable Clustering         */\
  }
#endif
 
/* Structures */
typedef struct _mega_ADP_INFO {
    u_char MaxConcCmds;
    u_char RbldRate;
    u_char MaxTargPerChan;
    u_char ChanPresent;
    u_char FwVer[4];
    u_short AgeOfFlash;
    u_char ChipSet;
    u_char DRAMSize;
    u_char CacheFlushInterval;
    u_char BiosVer[4];
    u_char resvd[7];
} mega_ADP_INFO;
 
typedef struct _mega_LDRV_INFO {
    u_char NumLDrv;
    u_char resvd[3];
    u_long LDrvSize[MAX_LOGICAL_DRIVES];
    u_char LDrvProp[MAX_LOGICAL_DRIVES];
    u_char LDrvState[MAX_LOGICAL_DRIVES];
} mega_LDRV_INFO;
 
typedef struct _mega_PDRV_INFO {
    u_char PDrvState[MAX_PHYSICAL_DRIVES];
    u_char resvd;
} mega_PDRV_INFO;
 
// RAID inquiry: Mailbox command 0x5
typedef struct _mega_RAIDINQ {
    mega_ADP_INFO AdpInfo;
    mega_LDRV_INFO LogdrvInfo;
    mega_PDRV_INFO PhysdrvInfo;
} mega_RAIDINQ;
 
// Passthrough command: Mailbox command 0x3
typedef struct mega_passthru {
    u_char timeout:3;		/* 0=6sec/1=60sec/2=10min/3=3hrs */
    u_char ars:1;
    u_char reserved:3;
    u_char islogical:1;
    u_char logdrv;		/* if islogical == 1 */
    u_char channel;		/* if islogical == 0 */
    u_char target;		/* if islogical == 0 */
    u_char queuetag;		/* unused */
    u_char queueaction;		/* unused */
    u_char cdb[MAX_CDB_LEN];
    u_char cdblen;
    u_char reqsenselen;
    u_char reqsensearea[MAX_REQ_SENSE_LEN];
    u_char numsgelements;
    u_char scsistatus;
    u_long dataxferaddr;
    u_long dataxferlen;
} mega_passthru;
 
typedef struct _mega_mailbox {
    /* 0x0 */ u_char cmd;
    /* 0x1 */ u_char cmdid;
    /* 0x2 */ u_short numsectors;
    /* 0x4 */ u_long lba;
    /* 0x8 */ u_long xferaddr;
    /* 0xC */ u_char logdrv;
    /* 0xD */ u_char numsgelements;
    /* 0xE */ u_char resvd;
    /* 0xF */ u_char busy;
    /* 0x10 */ u_char numstatus;
    /* 0x11 */ u_char status;
    /* 0x12 */ u_char completed[46];
    u_char mraid_poll;
    u_char mraid_ack;
    u_char pad[16];
} mega_mailbox;
 
typedef struct _mega_ioctl_mbox {
    /* 0x0 */ u_char cmd;
    /* 0x1 */ u_char cmdid;
    /* 0x2 */ u_char channel;
    /* 0x3 */ u_char param;
    /* 0x4 */ u_char pad[4];
    /* 0x8 */ u_long xferaddr;
    /* 0xC */ u_char logdrv;
    /* 0xD */ u_char numsgelements;
    /* 0xE */ u_char resvd;
    /* 0xF */ u_char busy;
    /* 0x10 */ u_char numstatus;
    /* 0x11 */ u_char status;
    /* 0x12 */ u_char completed[46];
    u_char mraid_poll;
    u_char mraid_ack;
    u_char malign[16];
} mega_ioctl_mbox;
 
typedef struct _mega_sglist {
    u_long address;
    u_long length;
} mega_sglist;
 
/* Queued command data */
typedef struct _mega_scb mega_scb;
 
struct _mega_scb {
    int idx;
    u_long flag;
    Scsi_Cmnd *SCpnt;
    u_char mboxData[16];
    mega_passthru pthru;
    mega_sglist *sgList;
    mega_scb *next;
};
 
/* Per-controller data */
typedef struct _mega_host_config {
    u_char numldrv;
    u_long flag;
    u_long base;
 
    struct tq_struct megaTq;
 
    /* Host adapter parameters */
    u_char fwVer[7];
    u_char biosVer[7];
 
    struct Scsi_Host *host;
 
    /* The following must be DMA-able!! */
    volatile mega_mailbox *mbox;
    volatile mega_mailbox mailbox;
    volatile u_char mega_buffer[2 * 1024L];
 
    u_char max_cmds;
    mega_scb scbList[MAX_COMMANDS];
} mega_host_config;
 
extern struct proc_dir_entry proc_scsi_megaraid;
 
const char *megaraid_info(struct Scsi_Host *);
int megaraid_detect(Scsi_Host_Template *);
int megaraid_release(struct Scsi_Host *);
int megaraid_command(Scsi_Cmnd *);
int megaraid_abort(Scsi_Cmnd *);
int megaraid_reset(Scsi_Cmnd *, unsigned int);
int megaraid_queue(Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
int megaraid_biosparam(Disk *, kdev_t, int *);
int megaraid_proc_info(char *buffer, char **start, off_t offset,
		       int length, int hostno, int inout);
 
#endif