OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rc203soc/] [sw/] [uClinux/] [drivers/] [scsi/] [qlogicisp.h] - Rev 1626

Go to most recent revision | Compare with Previous | Blame | View Log

/*
 * QLogic ISP1020 Intelligent SCSI Processor Driver (PCI)
 * Written by Erik H. Moe, ehm@cris.com
 * Copyright 1995, Erik H. Moe
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License as published by the
 * Free Software Foundation; either version 2, or (at your option) any
 * later version.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 */
 
/* Renamed and updated to 1.3.x by Michael Griffith <grif@cs.ucr.edu> */
 
/*
 * $Date: 2005-12-20 10:17:45 $
 * $Revision: 1.1 $
 *
 * $Log: not supported by cvs2svn $
 * Revision 1.1.1.1  2001/09/10 07:44:34  simons
 * Initial import
 *
 * Revision 1.1.1.1  2001/07/02 17:58:29  simons
 * Initial revision
 *
 * Revision 0.5  1995/09/22  02:32:56  root
 * do auto request sense
 *
 * Revision 0.4  1995/08/07  04:48:28  root
 * supply firmware with driver.
 * numerous bug fixes/general cleanup of code.
 *
 * Revision 0.3  1995/07/16  16:17:16  root
 * added reset/abort code.
 *
 * Revision 0.2  1995/06/29  03:19:43  root
 * fixed biosparam.
 * added queue protocol.
 *
 * Revision 0.1  1995/06/25  01:56:13  root
 * Initial release.
 *
 */
 
#ifndef _QLOGICISP_H
#define _QLOGICISP_H
 
/*
 * With the qlogic interface, every queue slot can hold a SCSI
 * command with up to 4 scatter/gather entries.  If we need more
 * than 4 entries, continuation entries can be used that hold
 * another 7 entries each.  Unlike for other drivers, this means
 * that the maximum number of scatter/gather entries we can
 * support at any given time is a function of the number of queue
 * slots available.  That is, host->can_queue and host->sg_tablesize
 * are dynamic and _not_ independent.  This all works fine because
 * requests are queued serially and the scatter/gather limit is
 * determined for each queue request anew.
 */
#define QLOGICISP_REQ_QUEUE_LEN	63	/* must be power of two - 1 */
#define QLOGICISP_MAX_SG(ql)	(4 + ((ql) > 0) ? 7*((ql) - 1) : 0)
 
int isp1020_detect(Scsi_Host_Template *);
int isp1020_release(struct Scsi_Host *);
const char * isp1020_info(struct Scsi_Host *);
int isp1020_queuecommand(Scsi_Cmnd *, void (* done)(Scsi_Cmnd *));
int isp1020_abort(Scsi_Cmnd *);
int isp1020_reset(Scsi_Cmnd *, unsigned int);
int isp1020_biosparam(Disk *, kdev_t, int[]);
 
#ifndef NULL
#define NULL (0)
#endif
 
extern struct proc_dir_entry proc_scsi_isp1020;
 
#define QLOGICISP {							   \
	/* next */		NULL,					   \
	/* usage_count */	NULL,					   \
	/* proc dir */		NULL,					   \
	/* procfs info */	NULL,					   \
	/* name */		NULL,					   \
	/* detect */		isp1020_detect,				   \
	/* release */		isp1020_release,			   \
	/* info */		isp1020_info,				   \
	/* command */		NULL,					   \
	/* queuecommand */	isp1020_queuecommand,			   \
	/* abort */		isp1020_abort,				   \
	/* reset */		isp1020_reset,				   \
	/* slave_attach */	NULL,					   \
	/* bios_param */	isp1020_biosparam,			   \
	/* can_queue */		QLOGICISP_REQ_QUEUE_LEN,		   \
	/* this_id */		-1,					   \
	/* sg_tablesize */	QLOGICISP_MAX_SG(QLOGICISP_REQ_QUEUE_LEN), \
	/* cmd_per_lun */	1,					   \
	/* present */		0,					   \
	/* unchecked_isa_dma */	0,					   \
	/* use_clustering */	DISABLE_CLUSTERING			   \
}
 
#endif /* _QLOGICISP_H */
 

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.