Subversion Repositories or1k

/*
 * Audio Command Interface (ACI) driver (sound/aci.c)
 *
 * ACI is a protocol used to communicate with the microcontroller on
 * some sound cards produced by miro, e.g. the miroSOUND PCM12 and
 * PCM20. The ACI has been developed for miro by Norberto Pellicci
 * <pellicci@ix.netcom.com>. Special thanks to both him and miro for
 * providing the ACI specification.
 *
 * The main function of the ACI is to control the mixer and to get a
 * product identification. On the PCM20, ACI also controls the radio
 * tuner on this card, however this is not yet supported in this
 * software.
 * 
 * This Voxware ACI driver currently only supports the ACI functions
 * on the miroSOUND PCM12 card. Support for miro soundcards with
 * additional ACI functions can easily be added later.
 *
 * Revision history:
 *
 *   1995-11-10  Markus Kuhn <mskuhn@cip.informatik.uni-erlangen.de>
 *        First version written.
 *   1995-12-31  Markus Kuhn
 *        Second revision, general code cleanup.
 *   1996-05-16	 Hannu Savolainen
 *	  Integrated with other parts of the driver.
 *   1996-05-28  Markus Kuhn
 *        Initialize CS4231A mixer, make ACI first mixer,
 *        use new private mixer API for solo mode.
 */
 
/*
 * Some driver specific information and features:
 *
 * This mixer driver identifies itself to applications as "ACI" in
 * mixer_info.id as retrieved by ioctl(fd, SOUND_MIXER_INFO, &mixer_info).
 *
 * Proprietary mixer features that go beyond the standard USS mixer
 * interface are:
 * 
 * Full duplex solo configuration:
 *
 *   int solo_mode;
 *   ioctl(fd, SOUND_MIXER_PRIVATE1, &solo_mode);
 *
 *   solo_mode = 0: deactivate solo mode (default)
 *   solo_mode > 0: activate solo mode
 *                  With activated solo mode, the PCM input can not any
 *                  longer hear the signals produced by the PCM output.
 *                  Activating solo mode is important in duplex mode in order
 *                  to avoid feedback distortions.
 *   solo_mode < 0: do not change solo mode (just retrieve the status)
 *
 *   When the ioctl() returns 0, solo_mode contains the previous
 *   status (0 = deactivated, 1 = activated). If solo mode is not
 *   implemented on this card, ioctl() returns -1 and sets errno to
 *   EINVAL.
 *
 */
 
#include <linux/config.h> /* CONFIG_ACI_MIXER */
#include "../sound_config.h"
#ifdef CONFIG_ACI_MIXER
 
#undef  DEBUG             /* if defined, produce a verbose report via syslog */
 
int aci_port = 0x354; /* as determined by bit 4 in the OPTi 929 MC4 register */
unsigned char aci_idcode[2] = {0, 0};         /* manufacturer and product ID */
unsigned char aci_version = 0;                       /* ACI firmware version */
int aci_solo;                     /* status bit of the card that can't be    *
                                   * checked with ACI versions prior to 0xb0 */
 
static int aci_present = 0;
 
#define COMMAND_REGISTER    (aci_port)
#define STATUS_REGISTER     (aci_port + 1)
#define BUSY_REGISTER       (aci_port + 2)
 
/*
 * Wait until the ACI microcontroller has set the READYFLAG in the
 * Busy/IRQ Source Register to 0. This is required to avoid
 * overrunning the soundcard microcontroller. We do a busy wait here,
 * because the microcontroller is not supposed to signal a busy
 * condition for more than a few clock cycles. In case of a time-out,
 * this function returns -1.
 *
 * This busy wait code normally requires less than 15 loops and
 * practically always less than 100 loops on my i486/DX2 66 MHz.
 *
 * Warning: Waiting on the general status flag after reseting the MUTE
 * function can take a VERY long time, because the PCM12 does some kind
 * of fade-in effect. For this reason, access to the MUTE function has
 * not been implemented at all.
 */
 
static int busy_wait(void)
{
  long timeout;
 
  for (timeout = 0; timeout < 10000000L; timeout++)
    if ((inb_p(BUSY_REGISTER) & 1) == 0)
      return 0;
 
#ifdef DEBUG
  printk("ACI: READYFLAG timed out.\n");
#endif
 
  return -1;
}
 
 
/*
 * Read the GENERAL STATUS register.
 */
 
static int read_general_status(void)
{
  unsigned long flags;
  int status;
 
  save_flags(flags);
  cli();
  if (busy_wait()) { restore_flags(flags); return -1; }
  status = (unsigned) inb_p(STATUS_REGISTER);
  restore_flags(flags);
  return status;
}
 
 
/*
 * The four ACI command types (implied, write, read and indexed) can
 * be sent to the microcontroller using the following four functions.
 * If a problem occurred, they return -1.
 */
 
static int implied_cmd(unsigned char opcode)
{
  unsigned long flags;
 
#ifdef DEBUG
  printk("ACI: implied_cmd(0x%02x)\n", opcode);
#endif
 
  save_flags(flags);
  cli();
 
  if (read_general_status() < 0 || busy_wait()) {
    restore_flags(flags);
    return -1;
  }
  outb_p(opcode, COMMAND_REGISTER);
 
  restore_flags(flags);
  return 0;
}
 
 
static int write_cmd(unsigned char opcode, unsigned char parameter)
{
  unsigned long flags;
  int status;
 
#ifdef DEBUG
  printk("ACI: write_cmd(0x%02x, 0x%02x)\n", opcode, parameter);
#endif
 
  save_flags(flags);
  cli();
 
  if (read_general_status() < 0 || busy_wait()) {
    restore_flags(flags);
    return -1;
  }
  outb_p(opcode, COMMAND_REGISTER);
  if (busy_wait()) { restore_flags(flags); return -1; }
  outb_p(parameter, COMMAND_REGISTER);
 
  if ((status = read_general_status()) < 0) {
    restore_flags(flags);
    return -1;
  }
  /* polarity of the INVALID flag depends on ACI version */
  if ((aci_version <  0xb0 && (status & 0x40) != 0) ||
      (aci_version >= 0xb0 && (status & 0x40) == 0)) {
    restore_flags(flags);
    printk("ACI: invalid write command 0x%02x, 0x%02x.\n",
	   opcode, parameter);
    return -1;
  }
 
  restore_flags(flags);
  return 0;
}
 
 
static int read_cmd(unsigned char opcode, int length, unsigned char *parameter)
{
  unsigned long flags;
  int i = 0;
 
  save_flags(flags);
  cli();
 
  if (read_general_status() < 0) { restore_flags(flags); return -1; }
  while (i < length) {
    if (busy_wait()) { restore_flags(flags); return -1; }
    outb_p(opcode, COMMAND_REGISTER);
    if (busy_wait()) { restore_flags(flags); return -1; }
    parameter[i++] = inb_p(STATUS_REGISTER);
#ifdef DEBUG
    if (i == 1)
      printk("ACI: read_cmd(0x%02x, %d) = 0x%02x\n", opcode, length,
	     parameter[i-1]);
    else
      printk("ACI: read_cmd cont.: 0x%02x\n", parameter[i-1]);
#endif
  }
 
  restore_flags(flags);
  return 0;
}
 
 
static int indexed_cmd(unsigned char opcode, unsigned char index,
		       unsigned char *parameter)
{
  unsigned long flags;
 
  save_flags(flags);
  cli();
 
  if (read_general_status() < 0 || busy_wait()) {
    restore_flags(flags);
    return -1;
  }
  outb_p(opcode, COMMAND_REGISTER);
  if (busy_wait()) { restore_flags(flags); return -1; }
  outb_p(index, COMMAND_REGISTER);
  if (busy_wait()) { restore_flags(flags); return -1; }
  *parameter = inb_p(STATUS_REGISTER);
#ifdef DEBUG
  printk("ACI: indexed_cmd(0x%02x, 0x%02x) = 0x%02x\n", opcode, index,
	 *parameter);
#endif
 
  restore_flags(flags);
  return 0;
}
 
 
/*
 * The following macro SCALE can be used to scale one integer volume
 * value into another one using only integer arithmetic. If the input
 * value x is in the range 0 <= x <= xmax, then the result will be in
 * the range 0 <= SCALE(xmax,ymax,x) <= ymax.
 *
 * This macro has for all xmax, ymax > 0 and all 0 <= x <= xmax the
 * following nice properties:
 *
 * - SCALE(xmax,ymax,xmax) = ymax
 * - SCALE(xmax,ymax,0) = 0
 * - SCALE(xmax,ymax,SCALE(ymax,xmax,SCALE(xmax,ymax,x))) = SCALE(xmax,ymax,x)
 *
 * In addition, the rounding error is minimal and nicely distributed.
 * The proofs are left as an exercise to the reader.
 */
 
#define SCALE(xmax,ymax,x) (((x)*(ymax)+(xmax)/2)/(xmax))
 
 
static int getvolume(caddr_t arg,
		     unsigned char left_index, unsigned char right_index)
{
  int vol;
  unsigned char buf;
 
  /* left channel */
  if (indexed_cmd(0xf0, left_index, &buf)) return -EIO;
  vol = SCALE(0x20, 100, buf < 0x20 ? 0x20-buf : 0);
  /* right channel */
  if (indexed_cmd(0xf0, right_index, &buf)) return -EIO;
  vol |= SCALE(0x20, 100, buf < 0x20 ? 0x20-buf : 0) << 8;
 
  return snd_ioctl_return((int *) arg, vol);
}
 
 
static int setvolume(caddr_t arg, 
		     unsigned char left_index, unsigned char right_index)
{
  int vol, ret;
  unsigned param;
 
  param = get_user((int *) arg);
  /* left channel */
  vol = param & 0xff;
  if (vol > 100) vol = 100;
  vol = SCALE(100, 0x20, vol);
  if (write_cmd(left_index, 0x20 - vol)) return -EIO;
  ret = SCALE(0x20, 100, vol);
  /* right channel */
  vol = (param >> 8) & 0xff;
  if (vol > 100) vol = 100;
  vol = SCALE(100, 0x20, vol);
  if (write_cmd(right_index, 0x20 - vol)) return -EIO;
  ret |= SCALE(0x20, 100, vol) << 8;
 
  return snd_ioctl_return((int *) arg, ret);
}
 
 
static int
aci_mixer_ioctl (int dev, unsigned int cmd, caddr_t arg)
{
  int status, vol;
  unsigned char buf;
 
  /* handle solo mode control */
  if (cmd == SOUND_MIXER_PRIVATE1) {
    if (get_user((int *) arg) >= 0) {
      aci_solo = !!get_user((int *) arg);
      if (write_cmd(0xd2, aci_solo)) return -EIO;
    } else if (aci_version >= 0xb0) {
      if ((status = read_general_status()) < 0) return -EIO;
      return snd_ioctl_return ((int *) arg, (status & 0x20) == 0);
    }
    return snd_ioctl_return((int *) arg, aci_solo);
  }
 
  if (((cmd >> 8) & 0xff) == 'M') {
    if (cmd & IOC_IN)
      /* read and write */
      switch (cmd & 0xff) {
      case SOUND_MIXER_VOLUME:
	return setvolume(arg, 0x01, 0x00);
      case SOUND_MIXER_CD:
	return setvolume(arg, 0x3c, 0x34);
      case SOUND_MIXER_MIC:
	return setvolume(arg, 0x38, 0x30);
      case SOUND_MIXER_LINE:
	return setvolume(arg, 0x39, 0x31);
      case SOUND_MIXER_SYNTH:
	return setvolume(arg, 0x3b, 0x33);
      case SOUND_MIXER_PCM:
	return setvolume(arg, 0x3a, 0x32);
      case SOUND_MIXER_LINE1:  /* AUX1 */
	return setvolume(arg, 0x3d, 0x35);
      case SOUND_MIXER_LINE2:  /* AUX2 */
	return setvolume(arg, 0x3e, 0x36);
      case SOUND_MIXER_IGAIN:  /* MIC pre-amp */
	vol = get_user((int *) arg) & 0xff;
	if (vol > 100) vol = 100;
	vol = SCALE(100, 3, vol);
	if (write_cmd(0x03, vol)) return -EIO;
	vol = SCALE(3, 100, vol);
	return snd_ioctl_return((int *) arg, vol | (vol << 8));
      case SOUND_MIXER_RECSRC:
	return snd_ioctl_return ((int *) arg, 0);
	break;
      default:
	return -EINVAL;
      }
    else
      /* only read */
      switch (cmd & 0xff) {
      case SOUND_MIXER_DEVMASK:
	return snd_ioctl_return ((int *) arg,
				 SOUND_MASK_VOLUME | SOUND_MASK_CD    |
				 SOUND_MASK_MIC    | SOUND_MASK_LINE  |
				 SOUND_MASK_SYNTH  | SOUND_MASK_PCM   |
#if 0
				 SOUND_MASK_IGAIN  |
#endif
				 SOUND_MASK_LINE1  | SOUND_MASK_LINE2);
	break;
      case SOUND_MIXER_STEREODEVS:
	return snd_ioctl_return ((int *) arg,
				 SOUND_MASK_VOLUME | SOUND_MASK_CD   |
				 SOUND_MASK_MIC    | SOUND_MASK_LINE |
				 SOUND_MASK_SYNTH  | SOUND_MASK_PCM  |
				 SOUND_MASK_LINE1  | SOUND_MASK_LINE2);
	break;
      case SOUND_MIXER_RECMASK:
	return snd_ioctl_return ((int *) arg, 0);
	break;
      case SOUND_MIXER_RECSRC:
	return snd_ioctl_return ((int *) arg, 0);
	break;
      case SOUND_MIXER_CAPS:
	return snd_ioctl_return ((int *) arg, 0);
	break;
      case SOUND_MIXER_VOLUME:
	return getvolume(arg, 0x04, 0x03);
      case SOUND_MIXER_CD:
	return getvolume(arg, 0x0a, 0x09);
      case SOUND_MIXER_MIC:
	return getvolume(arg, 0x06, 0x05);
      case SOUND_MIXER_LINE:
	return getvolume(arg, 0x08, 0x07);
      case SOUND_MIXER_SYNTH:
	return getvolume(arg, 0x0c, 0x0b);
      case SOUND_MIXER_PCM:
	return getvolume(arg, 0x0e, 0x0d);
      case SOUND_MIXER_LINE1:  /* AUX1 */
	return getvolume(arg, 0x11, 0x10);
      case SOUND_MIXER_LINE2:  /* AUX2 */
	return getvolume(arg, 0x13, 0x12);
      case SOUND_MIXER_IGAIN:  /* MIC pre-amp */
	if (indexed_cmd(0xf0, 0x21, &buf)) return -EIO;
	vol = SCALE(3, 100, buf <= 3 ? buf : 3);
	vol |= vol << 8;
	return snd_ioctl_return((int *) arg, vol);
      default:
	return -EINVAL;
      }
  }
 
  return -EINVAL;
}
 
 
static struct mixer_operations aci_mixer_operations =
{
  "ACI",
  "ACI mixer",
  aci_mixer_ioctl,
  NULL
};
 
static unsigned char
mad_read (int port)
{
  outb (0xE3, 0xf8f); /* Write MAD16 password */
  return inb (port);  /* Read from port */
}
 
 
/*
 * Check, whether there actually is any ACI port operational and if
 * one was found, then initialize the ACI interface, reserve the I/O
 * addresses and attach the new mixer to the relevant VoxWare data
 * structures.
 *
 * Returns:  1   ACI mixer detected
 *           0   nothing there
 *
 * There is also an internal mixer in the codec (CS4231A or AD1845),
 * that deserves no purpose in an ACI based system which uses an
 * external ACI controlled stereo mixer. Make sure that this codec
 * mixer has the AUX1 input selected as the recording source, that the
 * input gain is set near maximum and that the other channels going
 * from the inputs to the codec output are muted.
 */
 
int attach_aci(void)
{
  char *boardname = "unknown";
  int volume;
 
#define MC4_PORT	0xf90
 
  aci_port =
      (mad_read(MC4_PORT) & 0x10) ? 0x344 : 0x354;
 
  if (check_region(aci_port, 3)) {
#ifdef DEBUG
    printk("ACI: I/O area 0x%03x-0x%03x already used.\n",
           aci_port, aci_port+2);
#endif
    return 0;
  }
 
  if (read_cmd(0xf2, 2, aci_idcode)) {
#ifdef DEBUG
    printk("ACI: Failed to read idcode.\n");
#endif
    return 0;
  }
  if (read_cmd(0xf1, 1, &aci_version)) {
#ifdef DEBUG
    printk("ACI: Failed to read version.\n");
#endif
    return 0;
  }
 
  if (aci_idcode[0] == 0x6d) {
    /* it looks like a miro soundcard */
    switch (aci_idcode[1]) {
    case 0x41:
      boardname = "PCM1 pro / early PCM12";
      break;
    case 0x42:
      boardname = "PCM12";
      break;
    case 0x43:
      boardname = "PCM20";
      break;
    default:
      boardname = "unknown miro";
    }
  } else
#ifndef DEBUG
    return 0;
#endif
 
  printk("<ACI %02x, id %02x %02x (%s)> at 0x%03x\n",
	 aci_version, aci_idcode[0], aci_idcode[1], boardname, aci_port);
 
  /* initialize ACI mixer */
  implied_cmd(0xff);
  aci_solo = 0;
 
  /* attach the mixer */
  request_region(aci_port, 3, "sound mixer (ACI)");
  if (num_mixers < MAX_MIXER_DEV) {
    if (num_mixers > 0 &&
        !strcmp("MAD16 WSS (CS4231A)", mixer_devs[num_mixers-1]->name)) {
      /*
       * The previously registered mixer device is the CS4231A which
       * has no function on an ACI card. Make the ACI mixer the first
       * of the two mixer devices.
       */
      mixer_devs[num_mixers] = mixer_devs[num_mixers-1];
      mixer_devs[num_mixers-1] = &aci_mixer_operations;
      /*
       * Initialize the CS4231A mixer with reasonable values. It is
       * unlikely that the user ever will want to change these as all
       * channels can be mixed via ACI.
       */
      volume = 0x6464;
      mixer_devs[num_mixers]->
        ioctl(num_mixers, SOUND_MIXER_WRITE_PCM,     (caddr_t) &volume);
      volume = 0x6464;
      mixer_devs[num_mixers]->
        ioctl(num_mixers, SOUND_MIXER_WRITE_IGAIN,   (caddr_t) &volume);
      volume = 0;
      mixer_devs[num_mixers]->
        ioctl(num_mixers, SOUND_MIXER_WRITE_SPEAKER, (caddr_t) &volume);
      volume = 0;
      mixer_devs[num_mixers]->
        ioctl(num_mixers, SOUND_MIXER_WRITE_MIC,     (caddr_t) &volume);
      volume = 0;
      mixer_devs[num_mixers]->
        ioctl(num_mixers, SOUND_MIXER_WRITE_IMIX,    (caddr_t) &volume);
      volume = 0;
      mixer_devs[num_mixers]->
        ioctl(num_mixers, SOUND_MIXER_WRITE_LINE1,   (caddr_t) &volume);
      volume = 0;
      mixer_devs[num_mixers]->
        ioctl(num_mixers, SOUND_MIXER_WRITE_LINE2,   (caddr_t) &volume);
      volume = 0;
      mixer_devs[num_mixers]->
        ioctl(num_mixers, SOUND_MIXER_WRITE_LINE3,   (caddr_t) &volume);
      volume = SOUND_MASK_LINE1;
      mixer_devs[num_mixers]->
        ioctl(num_mixers, SOUND_MIXER_WRITE_RECSRC,  (caddr_t) &volume);
      num_mixers++;
    } else
      mixer_devs[num_mixers++] = &aci_mixer_operations;
  }
 
  /* Initialize ACI mixer with reasonable power-up values */
  volume = 0x3232;
  aci_mixer_ioctl(num_mixers-1, SOUND_MIXER_WRITE_VOLUME, (caddr_t) &volume);
  volume = 0x3232;
  aci_mixer_ioctl(num_mixers-1, SOUND_MIXER_WRITE_SYNTH,  (caddr_t) &volume);
  volume = 0x3232;
  aci_mixer_ioctl(num_mixers-1, SOUND_MIXER_WRITE_PCM,    (caddr_t) &volume);
  volume = 0x3232;
  aci_mixer_ioctl(num_mixers-1, SOUND_MIXER_WRITE_LINE,   (caddr_t) &volume);
  volume = 0x3232;
  aci_mixer_ioctl(num_mixers-1, SOUND_MIXER_WRITE_MIC,    (caddr_t) &volume);
  volume = 0x3232;
  aci_mixer_ioctl(num_mixers-1, SOUND_MIXER_WRITE_CD,     (caddr_t) &volume);
  volume = 0x3232;
  aci_mixer_ioctl(num_mixers-1, SOUND_MIXER_WRITE_LINE1,  (caddr_t) &volume);
  volume = 0x3232;
  aci_mixer_ioctl(num_mixers-1, SOUND_MIXER_WRITE_LINE2,  (caddr_t) &volume);
 
  aci_present = 1;
 
  return 1;
}
 
void unload_aci(void)
{
  if (aci_present)
    release_region(aci_port, 3);
}
 
#endif