Subversion Repositories or1k

#ifndef __ASM_MIPS_IOCTL_H
#define __ASM_MIPS_IOCTL_H
 
/*
 * The original linux ioctl numbering scheme was just a general
 * "anything goes" setup, where more or less random numbers were
 * assigned.  Sorry, I was clueless when I started out on this.
 *
 * On the alpha, we'll try to clean it up a bit, using a more sane
 * ioctl numbering, and also trying to be compatible with OSF/1 in
 * the process. I'd like to clean it up for the i386 as well, but
 * it's so painful recognizing both the new and the old numbers..
 *
 * The same applies for the MIPS ABI; in fact even the macros
 * from Linux/Alpha fit almost perfectly.
 */
 
#define _IOC_NRBITS	8
#define _IOC_TYPEBITS	8
#define _IOC_SIZEBITS	13
#define _IOC_DIRBITS	3
 
#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
 
#define _IOC_NRSHIFT	0
#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
 
/*
 * We to additionally limit parameters to a maximum 255 bytes.
 */
#define _IOC_SLMASK	0xff
 
/*
 * Direction bits _IOC_NONE could be 0, but OSF/1 gives it a bit.
 * And this turns out useful to catch old ioctl numbers in header
 * files for us.
 */
#define _IOC_NONE	1U
#define _IOC_READ	2U
#define _IOC_WRITE	4U
 
/*
 * The following are included for compatibility
 */
#define _IOC_VOID	0x20000000
#define _IOC_OUT	0x40000000
#define _IOC_IN		0x80000000
#define _IOC_INOUT	(IOC_IN|IOC_OUT)
 
#define _IOC(dir,type,nr,size) \
	(((dir)  << _IOC_DIRSHIFT) | \
	 ((type) << _IOC_TYPESHIFT) | \
	 ((nr)   << _IOC_NRSHIFT) | \
	 (((size) & _IOC_SLMASK) << _IOC_SIZESHIFT))
 
/* used to create numbers */
#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
 
/* used to decode them.. */
#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
 
/* ...and for the drivers/sound files... */
 
#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
 
#endif /* __ASM_MIPS_IOCTL_H */