Subversion Repositories or1k

/*  cpu_asm.c  ===> cpu_asm.S or cpu_asm.s
 *
 *  This file contains the basic algorithms for all assembly code used
 *  in an specific CPU port of RTEMS.  These algorithms must be implemented
 *  in assembly language
 *
 *  NOTE:  This is supposed to be a .S or .s file NOT a C file.
 *
 *  COPYRIGHT (c) 1989-1999.
 *  On-Line Applications Research Corporation (OAR).
 *
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *  http://www.OARcorp.com/rtems/license.html.
 *
 *  $Id: cpu_asm.c,v 1.2 2001-09-27 11:59:28 chris Exp $
 */
 
/*
 *  This is supposed to be an assembly file.  This means that system.h
 *  and cpu.h should not be included in a "real" cpu_asm file.  An
 *  implementation in assembly should include "cpu_asm.h>
 */
 
#include <rtems/system.h>
#include <rtems/score/cpu.h>
/* #include "cpu_asm.h> */
 
/*
 *  _CPU_Context_save_fp_context
 *
 *  This routine is responsible for saving the FP context
 *  at *fp_context_ptr.  If the point to load the FP context
 *  from is changed then the pointer is modified by this routine.
 *
 *  Sometimes a macro implementation of this is in cpu.h which dereferences
 *  the ** and a similarly named routine in this file is passed something
 *  like a (Context_Control_fp *).  The general rule on making this decision
 *  is to avoid writing assembly language.
 *
 *  NO_CPU Specific Information:
 *
 *  XXX document implementation including references if appropriate
 */
 
void _CPU_Context_save_fp(
  void **fp_context_ptr
)
{
}
 
/*
 *  _CPU_Context_restore_fp_context
 *
 *  This routine is responsible for restoring the FP context
 *  at *fp_context_ptr.  If the point to load the FP context
 *  from is changed then the pointer is modified by this routine.
 *
 *  Sometimes a macro implementation of this is in cpu.h which dereferences
 *  the ** and a similarly named routine in this file is passed something
 *  like a (Context_Control_fp *).  The general rule on making this decision
 *  is to avoid writing assembly language.
 *
 *  NO_CPU Specific Information:
 *
 *  XXX document implementation including references if appropriate
 */
 
void _CPU_Context_restore_fp(
  void **fp_context_ptr
)
{
}
 
/*  _CPU_Context_switch
 *
 *  This routine performs a normal non-FP context switch.
 *
 *  NO_CPU Specific Information:
 *
 *  XXX document implementation including references if appropriate
 */
 
void _CPU_Context_switch(
  Context_Control  *run,
  Context_Control  *heir
)
{
}
 
/*
 *  _CPU_Context_restore
 *
 *  This routine is generally used only to restart self in an
 *  efficient manner.  It may simply be a label in _CPU_Context_switch.
 *
 *  NOTE: May be unnecessary to reload some registers.
 *
 *  NO_CPU Specific Information:
 *
 *  XXX document implementation including references if appropriate
 */
 
void _CPU_Context_restore(
  Context_Control *new_context
)
{
}
 
/*  void __ISR_Handler()
 *
 *  This routine provides the RTEMS interrupt management.
 *
 *  NO_CPU Specific Information:
 *
 *  XXX document implementation including references if appropriate
 */
 
void _ISR_Handler()
{
   /*
    *  This discussion ignores a lot of the ugly details in a real
    *  implementation such as saving enough registers/state to be
    *  able to do something real.  Keep in mind that the goal is
    *  to invoke a user's ISR handler which is written in C and
    *  uses a certain set of registers.
    *
    *  Also note that the exact order is to a large extent flexible.
    *  Hardware will dictate a sequence for a certain subset of
    *  _ISR_Handler while requirements for setting
    */
 
  /*
   *  At entry to "common" _ISR_Handler, the vector number must be
   *  available.  On some CPUs the hardware puts either the vector
   *  number or the offset into the vector table for this ISR in a
   *  known place.  If the hardware does not give us this information,
   *  then the assembly portion of RTEMS for this port will contain
   *  a set of distinct interrupt entry points which somehow place
   *  the vector number in a known place (which is safe if another
   *  interrupt nests this one) and branches to _ISR_Handler.
   *
   *  save some or all context on stack
   *  may need to save some special interrupt information for exit
   *
   *  #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE )
   *    if ( _ISR_Nest_level == 0 )
   *      switch to software interrupt stack
   *  #endif
   *
   *  _ISR_Nest_level++;
   *
   *  _Thread_Dispatch_disable_level++;
   *
   *  (*_ISR_Vector_table[ vector ])( vector );
   *
   *  --_ISR_Nest_level;
   *
   *  if ( _ISR_Nest_level )
   *    goto the label "exit interrupt (simple case)"
   *
   *  #if ( CPU_HAS_SOFTWARE_INTERRUPT_STACK == TRUE )
   *    restore stack
   *  #endif
   *  
   *  if ( !_Context_Switch_necessary )
   *    goto the label "exit interrupt (simple case)"
   *  
   *  if ( !_ISR_Signals_to_thread_executing )
   *    _ISR_Signals_to_thread_executing = FALSE;
   *    goto the label "exit interrupt (simple case)"
   *
   *  call _Thread_Dispatch() or prepare to return to _ISR_Dispatch
   *
   *  prepare to get out of interrupt
   *  return from interrupt  (maybe to _ISR_Dispatch)
   *
   *  LABEL "exit interrupt (simple case):
   *  prepare to get out of interrupt
   *  return from interrupt
   */
}