URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [rtems/] [c/] [src/] [exec/] [score/] [cpu/] [sparc/] [rtems/] [score/] [cpu.h] - Rev 1765
Compare with Previous | Blame | View Log
/* cpu.h * * This include file contains information pertaining to the port of * the executive to the SPARC processor. * * COPYRIGHT (c) 1989-1999. * On-Line Applications Research Corporation (OAR). * * The license and distribution terms for this file may be * found in the file LICENSE in this distribution or at * http://www.OARcorp.com/rtems/license.html. * * Ported to ERC32 implementation of the SPARC by On-Line Applications * Research Corporation (OAR) under contract to the European Space * Agency (ESA). * * ERC32 modifications of respective RTEMS file: COPYRIGHT (c) 1995. * European Space Agency. * * $Id: cpu.h,v 1.2 2001-09-27 11:59:30 chris Exp $ */ #ifndef __CPU_h #define __CPU_h #ifdef __cplusplus extern "C" { #endif #include <rtems/score/sparc.h> /* pick up machine definitions */ #ifndef ASM #include <rtems/score/sparctypes.h> #endif /* conditional compilation parameters */ /* * Should the calls to _Thread_Enable_dispatch be inlined? * * If TRUE, then they are inlined. * If FALSE, then a subroutine call is made. */ #define CPU_INLINE_ENABLE_DISPATCH TRUE /* * Should the body of the search loops in _Thread_queue_Enqueue_priority * be unrolled one time? In unrolled each iteration of the loop examines * two "nodes" on the chain being searched. Otherwise, only one node * is examined per iteration. * * If TRUE, then the loops are unrolled. * If FALSE, then the loops are not unrolled. * * This parameter could go either way on the SPARC. The interrupt flash * code is relatively lengthy given the requirements for nops following * writes to the psr. But if the clock speed were high enough, this would * not represent a great deal of time. */ #define CPU_UNROLL_ENQUEUE_PRIORITY TRUE /* * Does the executive manage a dedicated interrupt stack in software? * * If TRUE, then a stack is allocated in _ISR_Handler_initialization. * If FALSE, nothing is done. * * The SPARC does not have a dedicated HW interrupt stack and one has * been implemented in SW. */ #define CPU_HAS_SOFTWARE_INTERRUPT_STACK TRUE /* * Does this CPU have hardware support for a dedicated interrupt stack? * * If TRUE, then it must be installed during initialization. * If FALSE, then no installation is performed. * * The SPARC does not have a dedicated HW interrupt stack. */ #define CPU_HAS_HARDWARE_INTERRUPT_STACK FALSE /* * Do we allocate a dedicated interrupt stack in the Interrupt Manager? * * If TRUE, then the memory is allocated during initialization. * If FALSE, then the memory is allocated during initialization. */ #define CPU_ALLOCATE_INTERRUPT_STACK TRUE /* * Does the RTEMS invoke the user's ISR with the vector number and * a pointer to the saved interrupt frame (1) or just the vector * number (0)? */ #define CPU_ISR_PASSES_FRAME_POINTER 0 /* * Does the CPU have hardware floating point? * * If TRUE, then the FLOATING_POINT task attribute is supported. * If FALSE, then the FLOATING_POINT task attribute is ignored. */ #if ( SPARC_HAS_FPU == 1 ) #define CPU_HARDWARE_FP TRUE #else #define CPU_HARDWARE_FP FALSE #endif /* * Are all tasks FLOATING_POINT tasks implicitly? * * If TRUE, then the FLOATING_POINT task attribute is assumed. * If FALSE, then the FLOATING_POINT task attribute is followed. */ #define CPU_ALL_TASKS_ARE_FP FALSE /* * Should the IDLE task have a floating point context? * * If TRUE, then the IDLE task is created as a FLOATING_POINT task * and it has a floating point context which is switched in and out. * If FALSE, then the IDLE task does not have a floating point context. */ #define CPU_IDLE_TASK_IS_FP FALSE /* * Should the saving of the floating point registers be deferred * until a context switch is made to another different floating point * task? * * If TRUE, then the floating point context will not be stored until * necessary. It will remain in the floating point registers and not * disturned until another floating point task is switched to. * * If FALSE, then the floating point context is saved when a floating * point task is switched out and restored when the next floating point * task is restored. The state of the floating point registers between * those two operations is not specified. */ #define CPU_USE_DEFERRED_FP_SWITCH TRUE /* * Does this port provide a CPU dependent IDLE task implementation? * * If TRUE, then the routine _CPU_Thread_Idle_body * must be provided and is the default IDLE thread body instead of * _CPU_Thread_Idle_body. * * If FALSE, then use the generic IDLE thread body if the BSP does * not provide one. */ #if (SPARC_HAS_LOW_POWER_MODE == 1) #define CPU_PROVIDES_IDLE_THREAD_BODY TRUE #else #define CPU_PROVIDES_IDLE_THREAD_BODY FALSE #endif /* * Does the stack grow up (toward higher addresses) or down * (toward lower addresses)? * * If TRUE, then the grows upward. * If FALSE, then the grows toward smaller addresses. * * The stack grows to lower addresses on the SPARC. */ #define CPU_STACK_GROWS_UP FALSE /* * The following is the variable attribute used to force alignment * of critical data structures. On some processors it may make * sense to have these aligned on tighter boundaries than * the minimum requirements of the compiler in order to have as * much of the critical data area as possible in a cache line. * * The SPARC does not appear to have particularly strict alignment * requirements. This value was chosen to take advantages of caches. */ #define CPU_STRUCTURE_ALIGNMENT __attribute__ ((aligned (16))) /* * Define what is required to specify how the network to host conversion * routines are handled. */ #define CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES FALSE #define CPU_BIG_ENDIAN TRUE #define CPU_LITTLE_ENDIAN FALSE /* * The following defines the number of bits actually used in the * interrupt field of the task mode. How those bits map to the * CPU interrupt levels is defined by the routine _CPU_ISR_Set_level(). * * The SPARC has 16 interrupt levels in the PIL field of the PSR. */ #define CPU_MODES_INTERRUPT_MASK 0x0000000F /* * This structure represents the organization of the minimum stack frame * for the SPARC. More framing information is required in certain situaions * such as when there are a large number of out parameters or when the callee * must save floating point registers. */ #ifndef ASM typedef struct { unsigned32 l0; unsigned32 l1; unsigned32 l2; unsigned32 l3; unsigned32 l4; unsigned32 l5; unsigned32 l6; unsigned32 l7; unsigned32 i0; unsigned32 i1; unsigned32 i2; unsigned32 i3; unsigned32 i4; unsigned32 i5; unsigned32 i6_fp; unsigned32 i7; void *structure_return_address; /* * The following are for the callee to save the register arguments in * should this be necessary. */ unsigned32 saved_arg0; unsigned32 saved_arg1; unsigned32 saved_arg2; unsigned32 saved_arg3; unsigned32 saved_arg4; unsigned32 saved_arg5; unsigned32 pad0; } CPU_Minimum_stack_frame; #endif /* ASM */ #define CPU_STACK_FRAME_L0_OFFSET 0x00 #define CPU_STACK_FRAME_L1_OFFSET 0x04 #define CPU_STACK_FRAME_L2_OFFSET 0x08 #define CPU_STACK_FRAME_L3_OFFSET 0x0c #define CPU_STACK_FRAME_L4_OFFSET 0x10 #define CPU_STACK_FRAME_L5_OFFSET 0x14 #define CPU_STACK_FRAME_L6_OFFSET 0x18 #define CPU_STACK_FRAME_L7_OFFSET 0x1c #define CPU_STACK_FRAME_I0_OFFSET 0x20 #define CPU_STACK_FRAME_I1_OFFSET 0x24 #define CPU_STACK_FRAME_I2_OFFSET 0x28 #define CPU_STACK_FRAME_I3_OFFSET 0x2c #define CPU_STACK_FRAME_I4_OFFSET 0x30 #define CPU_STACK_FRAME_I5_OFFSET 0x34 #define CPU_STACK_FRAME_I6_FP_OFFSET 0x38 #define CPU_STACK_FRAME_I7_OFFSET 0x3c #define CPU_STRUCTURE_RETURN_ADDRESS_OFFSET 0x40 #define CPU_STACK_FRAME_SAVED_ARG0_OFFSET 0x44 #define CPU_STACK_FRAME_SAVED_ARG1_OFFSET 0x48 #define CPU_STACK_FRAME_SAVED_ARG2_OFFSET 0x4c #define CPU_STACK_FRAME_SAVED_ARG3_OFFSET 0x50 #define CPU_STACK_FRAME_SAVED_ARG4_OFFSET 0x54 #define CPU_STACK_FRAME_SAVED_ARG5_OFFSET 0x58 #define CPU_STACK_FRAME_PAD0_OFFSET 0x5c #define CPU_MINIMUM_STACK_FRAME_SIZE 0x60 /* * Contexts * * Generally there are 2 types of context to save. * 1. Interrupt registers to save * 2. Task level registers to save * * This means we have the following 3 context items: * 1. task level context stuff:: Context_Control * 2. floating point task stuff:: Context_Control_fp * 3. special interrupt level context :: Context_Control_interrupt * * On the SPARC, we are relatively conservative in that we save most * of the CPU state in the context area. The ET (enable trap) bit and * the CWP (current window pointer) fields of the PSR are considered * system wide resources and are not maintained on a per-thread basis. */ #ifndef ASM typedef struct { /* * Using a double g0_g1 will put everything in this structure on a * double word boundary which allows us to use double word loads * and stores safely in the context switch. */ double g0_g1; unsigned32 g2; unsigned32 g3; unsigned32 g4; unsigned32 g5; unsigned32 g6; unsigned32 g7; unsigned32 l0; unsigned32 l1; unsigned32 l2; unsigned32 l3; unsigned32 l4; unsigned32 l5; unsigned32 l6; unsigned32 l7; unsigned32 i0; unsigned32 i1; unsigned32 i2; unsigned32 i3; unsigned32 i4; unsigned32 i5; unsigned32 i6_fp; unsigned32 i7; unsigned32 o0; unsigned32 o1; unsigned32 o2; unsigned32 o3; unsigned32 o4; unsigned32 o5; unsigned32 o6_sp; unsigned32 o7; unsigned32 psr; } Context_Control; #endif /* ASM */ /* * Offsets of fields with Context_Control for assembly routines. */ #define G0_OFFSET 0x00 #define G1_OFFSET 0x04 #define G2_OFFSET 0x08 #define G3_OFFSET 0x0C #define G4_OFFSET 0x10 #define G5_OFFSET 0x14 #define G6_OFFSET 0x18 #define G7_OFFSET 0x1C #define L0_OFFSET 0x20 #define L1_OFFSET 0x24 #define L2_OFFSET 0x28 #define L3_OFFSET 0x2C #define L4_OFFSET 0x30 #define L5_OFFSET 0x34 #define L6_OFFSET 0x38 #define L7_OFFSET 0x3C #define I0_OFFSET 0x40 #define I1_OFFSET 0x44 #define I2_OFFSET 0x48 #define I3_OFFSET 0x4C #define I4_OFFSET 0x50 #define I5_OFFSET 0x54 #define I6_FP_OFFSET 0x58 #define I7_OFFSET 0x5C #define O0_OFFSET 0x60 #define O1_OFFSET 0x64 #define O2_OFFSET 0x68 #define O3_OFFSET 0x6C #define O4_OFFSET 0x70 #define O5_OFFSET 0x74 #define O6_SP_OFFSET 0x78 #define O7_OFFSET 0x7C #define PSR_OFFSET 0x80 #define CONTEXT_CONTROL_SIZE 0x84 /* * The floating point context area. */ #ifndef ASM typedef struct { double f0_f1; double f2_f3; double f4_f5; double f6_f7; double f8_f9; double f10_f11; double f12_f13; double f14_f15; double f16_f17; double f18_f19; double f20_f21; double f22_f23; double f24_f25; double f26_f27; double f28_f29; double f30_f31; unsigned32 fsr; } Context_Control_fp; #endif /* ASM */ /* * Offsets of fields with Context_Control_fp for assembly routines. */ #define FO_F1_OFFSET 0x00 #define F2_F3_OFFSET 0x08 #define F4_F5_OFFSET 0x10 #define F6_F7_OFFSET 0x18 #define F8_F9_OFFSET 0x20 #define F1O_F11_OFFSET 0x28 #define F12_F13_OFFSET 0x30 #define F14_F15_OFFSET 0x38 #define F16_F17_OFFSET 0x40 #define F18_F19_OFFSET 0x48 #define F2O_F21_OFFSET 0x50 #define F22_F23_OFFSET 0x58 #define F24_F25_OFFSET 0x60 #define F26_F27_OFFSET 0x68 #define F28_F29_OFFSET 0x70 #define F3O_F31_OFFSET 0x78 #define FSR_OFFSET 0x80 #define CONTEXT_CONTROL_FP_SIZE 0x84 #ifndef ASM /* * Context saved on stack for an interrupt. * * NOTE: The PSR, PC, and NPC are only saved in this structure for the * benefit of the user's handler. */ typedef struct { CPU_Minimum_stack_frame Stack_frame; unsigned32 psr; unsigned32 pc; unsigned32 npc; unsigned32 g1; unsigned32 g2; unsigned32 g3; unsigned32 g4; unsigned32 g5; unsigned32 g6; unsigned32 g7; unsigned32 i0; unsigned32 i1; unsigned32 i2; unsigned32 i3; unsigned32 i4; unsigned32 i5; unsigned32 i6_fp; unsigned32 i7; unsigned32 y; unsigned32 tpc; } CPU_Interrupt_frame; #endif /* ASM */ /* * Offsets of fields with CPU_Interrupt_frame for assembly routines. */ #define ISF_STACK_FRAME_OFFSET 0x00 #define ISF_PSR_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x00 #define ISF_PC_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x04 #define ISF_NPC_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x08 #define ISF_G1_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x0c #define ISF_G2_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x10 #define ISF_G3_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x14 #define ISF_G4_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x18 #define ISF_G5_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x1c #define ISF_G6_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x20 #define ISF_G7_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x24 #define ISF_I0_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x28 #define ISF_I1_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x2c #define ISF_I2_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x30 #define ISF_I3_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x34 #define ISF_I4_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x38 #define ISF_I5_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x3c #define ISF_I6_FP_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x40 #define ISF_I7_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x44 #define ISF_Y_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x48 #define ISF_TPC_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x4c #define CONTEXT_CONTROL_INTERRUPT_FRAME_SIZE CPU_MINIMUM_STACK_FRAME_SIZE + 0x50 #ifndef ASM /* * The following table contains the information required to configure * the processor specific parameters. */ typedef struct { void (*pretasking_hook)( void ); void (*predriver_hook)( void ); void (*postdriver_hook)( void ); void (*idle_task)( void ); boolean do_zero_of_workspace; unsigned32 idle_task_stack_size; unsigned32 interrupt_stack_size; unsigned32 extra_mpci_receive_server_stack; void * (*stack_allocate_hook)( unsigned32 ); void (*stack_free_hook)( void* ); /* end of fields required on all CPUs */ } rtems_cpu_table; /* * Macros to access required entires in the CPU Table are in * the file rtems/system.h. */ /* * Macros to access SPARC specific additions to the CPU Table */ /* There are no CPU specific additions to the CPU Table for this port. */ /* * This variable is contains the initialize context for the FP unit. * It is filled in by _CPU_Initialize and copied into the task's FP * context area during _CPU_Context_Initialize. */ SCORE_EXTERN Context_Control_fp _CPU_Null_fp_context CPU_STRUCTURE_ALIGNMENT; /* * This stack is allocated by the Interrupt Manager and the switch * is performed in _ISR_Handler. These variables contain pointers * to the lowest and highest addresses in the chunk of memory allocated * for the interrupt stack. Since it is unknown whether the stack * grows up or down (in general), this give the CPU dependent * code the option of picking the version it wants to use. Thus * both must be present if either is. * * The SPARC supports a software based interrupt stack and these * are required. */ SCORE_EXTERN void *_CPU_Interrupt_stack_low; SCORE_EXTERN void *_CPU_Interrupt_stack_high; #if defined(erc32) /* * ERC32 Specific Variables */ SCORE_EXTERN unsigned32 _ERC32_MEC_Timer_Control_Mirror; #endif /* * The following type defines an entry in the SPARC's trap table. * * NOTE: The instructions chosen are RTEMS dependent although one is * obligated to use two of the four instructions to perform a * long jump. The other instructions load one register with the * trap type (a.k.a. vector) and another with the psr. */ typedef struct { unsigned32 mov_psr_l0; /* mov %psr, %l0 */ unsigned32 sethi_of_handler_to_l4; /* sethi %hi(_handler), %l4 */ unsigned32 jmp_to_low_of_handler_plus_l4; /* jmp %l4 + %lo(_handler) */ unsigned32 mov_vector_l3; /* mov _vector, %l3 */ } CPU_Trap_table_entry; /* * This is the set of opcodes for the instructions loaded into a trap * table entry. The routine which installs a handler is responsible * for filling in the fields for the _handler address and the _vector * trap type. * * The constants following this structure are masks for the fields which * must be filled in when the handler is installed. */ extern const CPU_Trap_table_entry _CPU_Trap_slot_template; /* * This is the executive's trap table which is installed into the TBR * register. * * NOTE: Unfortunately, this must be aligned on a 4096 byte boundary. * The GNU tools as of binutils 2.5.2 and gcc 2.7.0 would not * align an entity to anything greater than a 512 byte boundary. * * Because of this, we pull a little bit of a trick. We allocate * enough memory so we can grab an address on a 4096 byte boundary * from this area. */ #define SPARC_TRAP_TABLE_ALIGNMENT 4096 #ifndef NO_TABLE_MOVE SCORE_EXTERN unsigned8 _CPU_Trap_Table_area[ 8192 ] __attribute__ ((aligned (SPARC_TRAP_TABLE_ALIGNMENT))); #endif /* * The size of the floating point context area. */ #define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp ) #endif /* * Amount of extra stack (above minimum stack size) required by * MPCI receive server thread. Remember that in a multiprocessor * system this thread must exist and be able to process all directives. */ #define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 1024 /* * This defines the number of entries in the ISR_Vector_table managed * by the executive. * * On the SPARC, there are really only 256 vectors. However, the executive * has no easy, fast, reliable way to determine which traps are synchronous * and which are asynchronous. By default, synchronous traps return to the * instruction which caused the interrupt. So if you install a software * trap handler as an executive interrupt handler (which is desirable since * RTEMS takes care of window and register issues), then the executive needs * to know that the return address is to the trap rather than the instruction * following the trap. * * So vectors 0 through 255 are treated as regular asynchronous traps which * provide the "correct" return address. Vectors 256 through 512 are assumed * by the executive to be synchronous and to require that the return address * be fudged. * * If you use this mechanism to install a trap handler which must reexecute * the instruction which caused the trap, then it should be installed as * an asynchronous trap. This will avoid the executive changing the return * address. */ #define CPU_INTERRUPT_NUMBER_OF_VECTORS 256 #define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER 511 #define SPARC_SYNCHRONOUS_TRAP_BIT_MASK 0x100 #define SPARC_ASYNCHRONOUS_TRAP( _trap ) (_trap) #define SPARC_SYNCHRONOUS_TRAP( _trap ) ((_trap) + 256 ) #define SPARC_REAL_TRAP_NUMBER( _trap ) ((_trap) % 256) /* * Should be large enough to run all tests. This insures * that a "reasonable" small application should not have any problems. * * This appears to be a fairly generous number for the SPARC since * represents a call depth of about 20 routines based on the minimum * stack frame. */ #define CPU_STACK_MINIMUM_SIZE (1024*4) /* * CPU's worst alignment requirement for data types on a byte boundary. This * alignment does not take into account the requirements for the stack. * * On the SPARC, this is required for double word loads and stores. */ #define CPU_ALIGNMENT 8 /* * This number corresponds to the byte alignment requirement for the * heap handler. This alignment requirement may be stricter than that * for the data types alignment specified by CPU_ALIGNMENT. It is * common for the heap to follow the same alignment requirement as * CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict enough for the heap, * then this should be set to CPU_ALIGNMENT. * * NOTE: This does not have to be a power of 2. It does have to * be greater or equal to than CPU_ALIGNMENT. */ #define CPU_HEAP_ALIGNMENT CPU_ALIGNMENT /* * This number corresponds to the byte alignment requirement for memory * buffers allocated by the partition manager. This alignment requirement * may be stricter than that for the data types alignment specified by * CPU_ALIGNMENT. It is common for the partition to follow the same * alignment requirement as CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict * enough for the partition, then this should be set to CPU_ALIGNMENT. * * NOTE: This does not have to be a power of 2. It does have to * be greater or equal to than CPU_ALIGNMENT. */ #define CPU_PARTITION_ALIGNMENT CPU_ALIGNMENT /* * This number corresponds to the byte alignment requirement for the * stack. This alignment requirement may be stricter than that for the * data types alignment specified by CPU_ALIGNMENT. If the CPU_ALIGNMENT * is strict enough for the stack, then this should be set to 0. * * NOTE: This must be a power of 2 either 0 or greater than CPU_ALIGNMENT. * * The alignment restrictions for the SPARC are not that strict but this * should unsure that the stack is always sufficiently alignment that the * window overflow, underflow, and flush routines can use double word loads * and stores. */ #define CPU_STACK_ALIGNMENT 16 #ifndef ASM extern unsigned int sparc_disable_interrupts(); extern void sparc_enable_interrupts(); /* ISR handler macros */ /* * Disable all interrupts for a critical section. The previous * level is returned in _level. */ #define _CPU_ISR_Disable( _level ) \ (_level) = sparc_disable_interrupts() /* * Enable interrupts to the previous level (returned by _CPU_ISR_Disable). * This indicates the end of a critical section. The parameter * _level is not modified. */ #define _CPU_ISR_Enable( _level ) \ sparc_enable_interrupts( _level ) /* * This temporarily restores the interrupt to _level before immediately * disabling them again. This is used to divide long critical * sections into two or more parts. The parameter _level is not * modified. */ #define _CPU_ISR_Flash( _level ) \ sparc_flash_interrupts( _level ) /* * Map interrupt level in task mode onto the hardware that the CPU * actually provides. Currently, interrupt levels which do not * map onto the CPU in a straight fashion are undefined. */ #define _CPU_ISR_Set_level( _newlevel ) \ sparc_enable_interrupts( _newlevel << 8) unsigned32 _CPU_ISR_Get_level( void ); /* end of ISR handler macros */ /* Context handler macros */ /* * Initialize the context to a state suitable for starting a * task after a context restore operation. Generally, this * involves: * * - setting a starting address * - preparing the stack * - preparing the stack and frame pointers * - setting the proper interrupt level in the context * - initializing the floating point context * * NOTE: Implemented as a subroutine for the SPARC port. */ void _CPU_Context_Initialize( Context_Control *the_context, unsigned32 *stack_base, unsigned32 size, unsigned32 new_level, void *entry_point, boolean is_fp ); /* * This routine is responsible for somehow restarting the currently * executing task. * * On the SPARC, this is is relatively painless but requires a small * amount of wrapper code before using the regular restore code in * of the context switch. */ #define _CPU_Context_Restart_self( _the_context ) \ _CPU_Context_restore( (_the_context) ); /* * The FP context area for the SPARC is a simple structure and nothing * special is required to find the "starting load point" */ #define _CPU_Context_Fp_start( _base, _offset ) \ ( (void *) _Addresses_Add_offset( (_base), (_offset) ) ) /* * This routine initializes the FP context area passed to it to. * * The SPARC allows us to use the simple initialization model * in which an "initial" FP context was saved into _CPU_Null_fp_context * at CPU initialization and it is simply copied into the destination * context. */ #define _CPU_Context_Initialize_fp( _destination ) \ do { \ *((Context_Control_fp *) *((void **) _destination)) = _CPU_Null_fp_context; \ } while (0) /* end of Context handler macros */ /* Fatal Error manager macros */ /* * This routine copies _error into a known place -- typically a stack * location or a register, optionally disables interrupts, and * halts/stops the CPU. */ #define _CPU_Fatal_halt( _error ) \ do { \ unsigned32 level; \ \ level = sparc_disable_interrupts(); \ asm volatile ( "mov %0, %%g1 " : "=r" (level) : "0" (level) ); \ while (1); /* loop forever */ \ } while (0) /* end of Fatal Error manager macros */ /* Bitfield handler macros */ /* * The SPARC port uses the generic C algorithm for bitfield scan if the * CPU model does not have a scan instruction. */ #if ( SPARC_HAS_BITSCAN == 0 ) #define CPU_USE_GENERIC_BITFIELD_CODE TRUE #define CPU_USE_GENERIC_BITFIELD_DATA TRUE #else #error "scan instruction not currently supported by RTEMS!!" #endif /* end of Bitfield handler macros */ /* Priority handler handler macros */ /* * The SPARC port uses the generic C algorithm for bitfield scan if the * CPU model does not have a scan instruction. */ #if ( SPARC_HAS_BITSCAN == 1 ) #error "scan instruction not currently supported by RTEMS!!" #endif /* end of Priority handler macros */ /* functions */ /* * _CPU_Initialize * * This routine performs CPU dependent initialization. */ void _CPU_Initialize( rtems_cpu_table *cpu_table, void (*thread_dispatch) ); /* * _CPU_ISR_install_raw_handler * * This routine installs new_handler to be directly called from the trap * table. */ void _CPU_ISR_install_raw_handler( unsigned32 vector, proc_ptr new_handler, proc_ptr *old_handler ); /* * _CPU_ISR_install_vector * * This routine installs an interrupt vector. */ void _CPU_ISR_install_vector( unsigned32 vector, proc_ptr new_handler, proc_ptr *old_handler ); #if (CPU_PROVIDES_IDLE_THREAD_BODY == TRUE) /* * _CPU_Thread_Idle_body * * Some SPARC implementations have low power, sleep, or idle modes. This * tries to take advantage of those models. */ void _CPU_Thread_Idle_body( void ); #endif /* CPU_PROVIDES_IDLE_THREAD_BODY */ /* * _CPU_Context_switch * * This routine switches from the run context to the heir context. */ void _CPU_Context_switch( Context_Control *run, Context_Control *heir ); /* * _CPU_Context_restore * * This routine is generally used only to restart self in an * efficient manner. */ void _CPU_Context_restore( Context_Control *new_context ); /* * _CPU_Context_save_fp * * This routine saves the floating point context passed to it. */ void _CPU_Context_save_fp( void **fp_context_ptr ); /* * _CPU_Context_restore_fp * * This routine restores the floating point context passed to it. */ void _CPU_Context_restore_fp( void **fp_context_ptr ); /* * CPU_swap_u32 * * The following routine swaps the endian format of an unsigned int. * It must be static because it is referenced indirectly. * * This version will work on any processor, but if you come across a better * way for the SPARC PLEASE use it. The most common way to swap a 32-bit * entity as shown below is not any more efficient on the SPARC. * * swap least significant two bytes with 16-bit rotate * swap upper and lower 16-bits * swap most significant two bytes with 16-bit rotate * * It is not obvious how the SPARC can do significantly better than the * generic code. gcc 2.7.0 only generates about 12 instructions for the * following code at optimization level four (i.e. -O4). */ static inline unsigned int CPU_swap_u32( unsigned int value ) { unsigned32 byte1, byte2, byte3, byte4, swapped; byte4 = (value >> 24) & 0xff; byte3 = (value >> 16) & 0xff; byte2 = (value >> 8) & 0xff; byte1 = value & 0xff; swapped = (byte1 << 24) | (byte2 << 16) | (byte3 << 8) | byte4; return( swapped ); } #define CPU_swap_u16( value ) \ (((value&0xff) << 8) | ((value >> 8)&0xff)) #endif ASM #ifdef __cplusplus } #endif #endif