Subversion Repositories or1k

//
//      $Id: rtems_skel.S,v 1.1.1.1 2001-07-10 09:55:58 chris Exp $
//
//      skeleton.sa 3.2 4/26/91
//
//      This file contains code that is system dependent and will
//      need to be modified to install the FPSP.
//
//      Each entry point for exception 'xxxx' begins with a 'jmp fpsp_xxxx'.
//      Put any target system specific handling that must be done immediately
//      before the jump instruction.  If there no handling necessary, then
//      the 'fpsp_xxxx' handler entry point should be placed in the exception
//      table so that the 'jmp' can be eliminated. If the FPSP determines that the
//      exception is one that must be reported then there will be a
//      return from the package by a 'jmp real_xxxx'.  At that point
//      the machine state will be identical to the state before
//      the FPSP was entered.  In particular, whatever condition
//      that caused the exception will still be pending when the FPSP
//      package returns.  Thus, there will be system specific code
//      to handle the exception.
//
//      If the exception was completely handled by the package, then
//      the return will be via a 'jmp fpsp_done'.  Unless there is 
//      OS specific work to be done (such as handling a context switch or
//      interrupt) the user program can be resumed via 'rte'.
//
//      In the following skeleton code, some typical 'real_xxxx' handling
//      code is shown.  This code may need to be moved to an appropriate
//      place in the target system, or rewritten.
//      

//              Copyright (C) Motorola, Inc. 1990
//                      All Rights Reserved
//
//      THIS IS UNPUBLISHED PROPRIETARY SOURCE CODE OF MOTOROLA 
//      The copyright notice above does not evidence any  
//      actual or intended publication of such source code.

//  $Id: rtems_skel.S,v 1.1.1.1 2001-07-10 09:55:58 chris Exp $

//
//      Modified for Linux-1.3.x by Jes Sorensen (jds@kom.auc.dk)
//      Modified for RTEMS 4.0.0 by Eric Norum (eric@skatter.usask.ca)
//

#include <asm.h>

//SKELETON      idnt    2,1 | Motorola 040 Floating Point Software Package

#include "fpsp.defs"

//
//      Divide by Zero exception
//
//      All dz exceptions are 'real', hence no fpsp_dz entry point.
//
        .global SYM(_fpspEntry_dz)
SYM(_fpspEntry_dz):
        link            a6,#-LOCAL_SIZE
        fsave           -(sp)
        bclrb           #E1,E_BYTE(a6)
        frestore        (sp)+
        unlk            a6
        jmp             ([SYM(M68040FPSPUserExceptionHandlers)+3*4],%za0)

//
//      Inexact exception
//
//      All inexact exceptions are real, but the 'real' handler
//      will probably want to clear the pending exception.
//      The provided code will clear the E3 exception (if pending), 
//      otherwise clear the E1 exception.  The frestore is not really
//      necessary for E1 exceptions.
//
// Code following the 'inex' label is to handle bug #1232.  In this
// bug, if an E1 snan, ovfl, or unfl occurred, and the process was
// swapped out before taking the exception, the exception taken on
// return was inex, rather than the correct exception.  The snan, ovfl,
// and unfl exception to be taken must not have been enabled.  The
// fix is to check for E1, and the existence of one of snan, ovfl,
// or unfl bits set in the fpsr.  If any of these are set, branch
// to the appropriate  handler for the exception in the fpsr.  Note
// that this fix is only for d43b parts, and is skipped if the
// version number is not $40.
// 
//
        .global SYM(_fpspEntry_inex)
        .global real_inex
SYM(_fpspEntry_inex):
        link            a6,#-LOCAL_SIZE
        fsave           -(sp)
        cmpib           #VER_40,(sp)            //test version number
        bnes            not_fmt40
        fmovel          fpsr,-(sp)
        btstb           #E1,E_BYTE(a6)          //test for E1 set
        beqs            not_b1232
        btstb           #snan_bit,2(sp) //test for snan
        beq             inex_ckofl
        addl            #4,sp
        frestore        (sp)+
        unlk            a6
        bra             snan
inex_ckofl:
        btstb           #ovfl_bit,2(sp) //test for ovfl
        beq             inex_ckufl 
        addl            #4,sp
        frestore        (sp)+
        unlk            a6
        bra             SYM(_fpspEntry_ovfl)
inex_ckufl:
        btstb           #unfl_bit,2(sp) //test for unfl
        beq             not_b1232
        addl            #4,sp
        frestore        (sp)+
        unlk            a6
        bra             SYM(_fpspEntry_unfl)

//
// We do not have the bug 1232 case.  Clean up the stack and call
// real_inex.
//
not_b1232:
        addl            #4,sp
        frestore        (sp)+
        unlk            a6

real_inex:
        link            a6,#-LOCAL_SIZE
        fsave           -(sp)
not_fmt40:
        bclrb           #E3,E_BYTE(a6)          //clear and test E3 flag
        beqs            inex_cke1
//
// Clear dirty bit on dest resister in the frame before branching
// to b1238_fix.
//
        moveml          d0/d1,USER_DA(a6)
        bfextu          CMDREG1B(a6){#6:#3},d0          //get dest reg no
        bclrb           d0,FPR_DIRTY_BITS(a6)   //clr dest dirty bit
        bsrl            b1238_fix               //test for bug1238 case
        moveml          USER_DA(a6),d0/d1
        bras            inex_done
inex_cke1:
        bclrb           #E1,E_BYTE(a6)
inex_done:
        frestore        (sp)+
        unlk            a6
        jmp     ([SYM(M68040FPSPUserExceptionHandlers)+2*4],%za0)
        
//
//      Overflow exception
//
        .global SYM(_fpspEntry_ovfl)
        .global real_ovfl
SYM(_fpspEntry_ovfl):
        jmp     fpsp_ovfl
real_ovfl:
        link            a6,#-LOCAL_SIZE
        fsave           -(sp)
        bclrb           #E3,E_BYTE(a6)          //clear and test E3 flag
        bnes            ovfl_done
        bclrb           #E1,E_BYTE(a6)
ovfl_done:
        frestore        (sp)+
        unlk            a6
        jmp     ([SYM(M68040FPSPUserExceptionHandlers)+6*4],%za0)
        
//
//      Underflow exception
//
        .global SYM(_fpspEntry_unfl)
        .global real_unfl
SYM(_fpspEntry_unfl):
        jmp     fpsp_unfl
real_unfl:
        link            a6,#-LOCAL_SIZE
        fsave           -(sp)
        bclrb           #E3,E_BYTE(a6)          //clear and test E3 flag
        bnes            unfl_done
        bclrb           #E1,E_BYTE(a6)
unfl_done:
        frestore        (sp)+
        unlk            a6
        jmp     ([SYM(M68040FPSPUserExceptionHandlers)+4*4],%za0)
        
//
//      Signalling NAN exception
//
        .global SYM(_fpspEntry_snan)
        .global real_snan
SYM(_fpspEntry_snan):
snan:
        jmp     fpsp_snan
real_snan:
        link            a6,#-LOCAL_SIZE
        fsave           -(sp)
        bclrb           #E1,E_BYTE(a6)  //snan is always an E1 exception
        frestore        (sp)+
        unlk            a6
        jmp     ([SYM(M68040FPSPUserExceptionHandlers)+7*4],%za0)

//
//      Operand Error exception
//
        .global SYM(_fpspEntry_operr)
        .global real_operr
SYM(_fpspEntry_operr):
        jmp     fpsp_operr
real_operr:
        link            a6,#-LOCAL_SIZE
        fsave           -(sp)
        bclrb           #E1,E_BYTE(a6)  //operr is always an E1 exception
        frestore        (sp)+
        unlk            a6
        jmp     ([SYM(M68040FPSPUserExceptionHandlers)+5*4],%za0)
        
//
//      BSUN exception
//
//      This sample handler simply clears the nan bit in the FPSR.
//
        .global SYM(_fpspEntry_bsun)
        .global real_bsun
SYM(_fpspEntry_bsun):
        jmp     fpsp_bsun
real_bsun:
        link            a6,#-LOCAL_SIZE
        fsave           -(sp)
        bclrb           #E1,E_BYTE(a6)  //bsun is always an E1 exception
        fmovel          fpsr,-(sp)
        bclrb           #nan_bit,(sp)
        fmovel          (sp)+,fpsr
        frestore        (sp)+
        unlk            a6
        jmp     ([SYM(M68040FPSPUserExceptionHandlers)+1*4],%za0)

//
//      F-line exception
//
//      A 'real' F-line exception is one that the FPSP is not supposed to 
//      handle. E.g. an instruction with a co-processor ID that is not 1.
//
        .global SYM(_fpspEntry_fline)
        .global real_fline
SYM(_fpspEntry_fline):
        jmp     fpsp_fline
real_fline:
        jmp     ([SYM(M68040FPSPUserExceptionHandlers)+0*4],%za0)

//
//      Unsupported data type exception
//
        .global SYM(_fpspEntry_unsupp)
        .global real_unsupp
SYM(_fpspEntry_unsupp):
        jmp     fpsp_unsupp
real_unsupp:
        link            a6,#-LOCAL_SIZE
        fsave           -(sp)
        bclrb           #E1,E_BYTE(a6)  //unsupp is always an E1 exception
        frestore        (sp)+
        unlk            a6
        jmp     ([SYM(M68040FPSPUserExceptionHandlers)+8*4],%za0)

//
//      Trace exception
//
        .global real_trace
real_trace:
        trap    #10

//
//      fpsp_fmt_error --- exit point for frame format error
//
//      The fpu stack frame does not match the frames existing
//      or planned at the time of this writing.  The fpsp is
//      unable to handle frame sizes not in the following
//      version:size pairs:
//
//      {4060, 4160} - busy frame
//      {4028, 4130} - unimp frame
//      {4000, 4100} - idle frame
//
        .global fpsp_fmt_error
fpsp_fmt_error:
        trap    #11

//
//      fpsp_done --- FPSP exit point
//
//      The exception has been handled by the package and we are ready
//      to return to user mode, but there may be OS specific code
//      to execute before we do.  If there is, do it now.
//
// For now, the RTEMS does not bother looking at the
// possibility that it is time to reschedule....
//

        .global fpsp_done
fpsp_done:
        rte

//
//      mem_write --- write to user or supervisor address space
//
// Writes to memory while in supervisor mode.
//
//      a0 - supervisor source address
//      a1 - user/supervisor destination address
//      d0 - number of bytes to write (maximum count is 12)
//
        .global mem_write
mem_write:
        btstb   #5,EXC_SR(a6)   //check for supervisor state
        beqs    user_write
super_write:
        moveb   (a0)+,(a1)+
        subql   #1,d0
        bnes    super_write
        rts
user_write:
        movel   d1,-(sp)        //preserve d1 just in case
        movel   d0,-(sp)
        movel   a1,-(sp)
        movel   a0,-(sp)
        jsr             copyout
        addw    #12,sp
        movel   (sp)+,d1
        rts
//
//      mem_read --- read from user or supervisor address space
//
// Reads from memory while in supervisor mode.
//
// The FPSP calls mem_read to read the original F-line instruction in order
// to extract the data register number when the 'Dn' addressing mode is
// used.
//
//Input:
//      a0 - user/supervisor source address
//      a1 - supervisor destination address
//      d0 - number of bytes to read (maximum count is 12)
//
// Like mem_write, mem_read always reads with a supervisor 
// destination address on the supervisor stack.  Also like mem_write,
// the EXC_SR is checked and a simple memory copy is done if reading
// from supervisor space is indicated.
//
        .global mem_read
mem_read:
        btstb   #5,EXC_SR(a6)   //check for supervisor state
        beqs    user_read
super_read:
        moveb   (a0)+,(a1)+
        subql   #1,d0
        bnes    super_read
        rts
user_read:
        movel   d1,-(sp)        //preserve d1 just in case
        movel   d0,-(sp)
        movel   a1,-(sp)
        movel   a0,-(sp)
        jsr             copyin
        addw    #12,sp
        movel   (sp)+,d1
        rts

//
// Use these routines if your kernel does not have copyout/copyin equivalents.
// Assumes that D0/D1/A0/A1 are scratch registers. copyout overwrites DFC,
// and copyin overwrites SFC.
//
copyout:
        movel   4(sp),a0        // source
        movel   8(sp),a1        // destination
        movel   12(sp),d0       // count
        subl    #1,d0           // dec count by 1 for dbra
        movel   #1,d1
        movec   d1,dfc          // set dfc for user data space
moreout:
        moveb   (a0)+,d1        // fetch supervisor byte
        movesb  d1,(a1)+        // write user byte
        dbf     d0,moreout
        rts

copyin:
        movel   4(sp),a0        // source
        movel   8(sp),a1        // destination
        movel   12(sp),d0       // count
        subl    #1,d0           // dec count by 1 for dbra
        movel   #1,d1
        movec   d1,sfc          // set sfc for user space
morein:
        movesb  (a0)+,d1        // fetch user byte
        moveb   d1,(a1)+        // write supervisor byte
        dbf     d0,morein
        rts

        |end