URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [rtems-20020807/] [c/] [configure.ac] - Rev 1775
Go to most recent revision | Compare with Previous | Blame | View Log
## Process this file with autoconf to produce a configure script.
##
## configure.ac,v 1.3 2002/03/28 00:52:08 joel Exp
AC_PREREQ(2.52)
AC_INIT([rtems-c],[_RTEMS_VERSION],[rtems-bugs@OARcorp.com])
AC_CONFIG_SRCDIR([src])
RTEMS_TOP(..)
AC_CONFIG_AUX_DIR(..)
RTEMS_CANONICAL_TARGET_CPU
AM_INIT_AUTOMAKE([no-define foreign 1.6])
AM_MAINTAINER_MODE
## These options are used within this file.
RTEMS_ENABLE_BARE
RTEMS_ENABLE_RTEMSBSP(rtems_bsp)
RTEMS_CHECK_CPU
RTEMS_CANONICAL_HOST
AS_IF([test -z "$rtems_bsp"],
[RTEMS_CHECK_BSPS(rtems_bsp)])
for i in $rtems_bsp; do
# make sure there is a make/custom file for the bsp
RTEMS_CHECK_CUSTOM_BSP(i)
RTEMS_BSP_ALIAS($i,bspdir)
# Is there code where there should be for this BSP?
# The bare bsp is a special case as it is not under the RTEMS_CPU path
case $bspdir in
bare)
bspcpudir=
;;
*)
bspcpudir=$RTEMS_CPU/
;;
esac
if test -d "$srcdir/$RTEMS_TOPdir/c/src/lib/libbsp/$bspcpudir$bspdir"; then
RTEMS_BSP_LIST="$RTEMS_BSP_LIST $i"
else
AC_MSG_ERROR([unable to find libbsp directory ($bspdir) for $i])
fi
done
#
# Compose the configuration arguments to be passed to c/src/configure
#
##
## Partially borrowed from autoconf-2.13
##
## Adjust paths
_RTEMS_ADJUST_SRCDIR([rtems_bsp_configure],[src])
rtems_bsp_configure="$rtems_bsp_configure/configure"
## Remove --cache-file, --srcdir and --enable-rtemsbsp arguments
## so they do not pile up
rtems_bsp_configure_args=
for ac_arg in $ac_configure_args; do
if test -n "$ac_prev"; then
ac_prev=
continue
fi
case "$ac_arg" in
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
;;
-enable-rtemsbsp=* | --enable-rtemsbsp=*) ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
;;
*) rtems_bsp_configure_args="$rtems_bsp_configure_args $ac_arg" ;;
esac
done
rtems_bsp_configure="$rtems_bsp_configure $rtems_bsp_configure_args"
AC_SUBST(rtems_bsp_configure)
AC_SUBST(RTEMS_BSP_LIST)
# Explicitly list all Makefiles here
AC_CONFIG_FILES([Makefile])
AC_OUTPUT
echo
echo target architecture: $target_cpu.
echo available BSPs: $rtems_bsp.
echo \'${MAKE} all\' will build the following BSPs: $RTEMS_BSP_LIST.
echo other BSPs can be built with \'${MAKE} RTEMS_BSP=\"bsp1 bsp2 ...\"\'
echo
Go to most recent revision | Compare with Previous | Blame | View Log