URL https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k

[/] [or1k/] [trunk/] [rtems-20020807/] [c/] [src/] [lib/] [libbsp/] [a29k/] [portsw/] [start/] [pswmacro.ah] - Rev 1026

Go to most recent revision | Compare with Previous | Blame | View Log
; /* @(#)pswmacro.ah    1.1 96/05/23 08:56:58, TEI */
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;                macros: Do_install and init_TLB
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;  /* pswmacro.ah,v 1.1 1996/09/18 20:56:34 joel Exp */

;* File information and includes.

        .file   "macro.ah"
        .ident  "@(#)pswmacro.ah        1.1 96/05/23 08:56:58, TEI"


        .macro  CONST32, RegName, RegValue
                const   RegName, RegValue
                consth  RegName, RegValue
        .endm

        .macro  CONSTX, RegName, RegValue
                .if (RegValue) <= 0x0000ffff
                        const   RegName, RegValue
                .else
                        const   RegName, RegValue
                        consth  RegName, RegValue
                .endif
        .endm

        .macro  PRODEV, RegName
                srl     RegName, RegName, 24
        .endm

;
;* MACRO TO INSTALL VECTOR TABLE ENTRIES
;
 
;* Assumes vector table address in v0
 
        .macro  _setvec, trapnum, trapaddr
                mfsr    v0, vab                 ;
                const   v2, trapnum             ;
                sll     v1, v2, 2               ;
                add     v1, v1, v0              ; v0 has location of vector tab
 
                const   v2, trapaddr            ;
                consth  v2, trapaddr            ;
                store   0, 0, v2, v1            ;
                nop                             ;
        .endm
 
        .macro  syscall, name
                const     tav, HIF_@name        ;
                asneq   V_SYSCALL, gr1, gr1     ;
                nop                             ;
                nop                             ;
        .endm



;* MACRO TO INSTALL VECTOR TABLE ENTRIES 

        .macro  Do_Install, V_Number, V_Address
                const   lr4, V_Address 
                consth  lr4, V_Address
                const   lr3, V_Number * 4
                consth  lr3, V_Number * 4
                call    lr0, V_Install
                nop
        .endm

        .macro  Do_InstallX, V_Number, V_Address
                const   lr4, V_Address 
                consth  lr4, V_Address
                const   lr3, V_Number * 4
                consth  lr3, V_Number * 4
                call    lr0, V_InstallX
                nop
        .endm



; push a register onto the stack
        .macro  pushreg, reg, sp
        sub     sp, sp, 4               ; adjust stack pointer
        store   0, 0, reg, sp           ; push register
        .endm

        .macro  push, sp, reg
                sub     sp, sp, 4
                store   0, 0, reg, sp
        .endm

; pop the register from stack
        .macro  popreg, reg, sp
        load    0, 0, reg, sp           ; pop register
        add     sp, sp, 4               ; adjust stack pointer
        .endm
        .macro  pop, reg, sp
                load    0, 0, reg, sp
                add     sp, sp, 4
        .endm

; push a special register onto stack
        .macro  pushspcl, spcl, tmpreg, sp
        sub     sp, sp, 4               ; adjust stack pointer
        mfsr    tmpreg, spcl            ; get spcl reg
        store   0, 0, tmpreg, sp        ; push onto stack
        .endm

        .macro  pushsr, sp, reg, sreg
                mfsr    reg, sreg
                sub     sp, sp, 4
                store   0, 0, reg, sp
        .endm

; pop a special register from stack
        .macro  popspcl, spcl, tmpreg, sp
        load    0, 0, tmpreg, sp        ; pop from stack
        add     sp, sp, 4               ; adjust stack pointer
        mtsr    spcl, tmpreg            ; set spcl reg
        .endm

        .macro  popsr, sreg, reg, sp
                load    0, 0, reg, sp
                add     sp, sp, 4
                mtsr    sreg, reg
        .endm

;
; save freeze mode registers on memory stack.
;

        .macro  SaveFZState,    tmp1, tmp2

                ; save freeze mode registers.

                pushspcl pc0, tmp1, msp
                pushspcl pc1, tmp1, msp
                pushspcl alu, tmp1, msp

                pushspcl cha, tmp1, msp
                pushspcl chd, tmp1, msp
                pushspcl chc, tmp1, msp

                pushspcl ops, tmp1, msp

                ; turn freeze off

                const   tmp2, FZ
                mfsr    tmp1, cps
                andn    tmp1, tmp1, tmp2
                mtsr    cps, tmp1
        .endm

; restore freeze mode registers from memory stack.

        .macro  RestoreFZState, tmp1, tmp2

                ; turn freeze on

                const   tmp2, (FZ|DI|DA)
                mfsr    tmp1, cps
                or      tmp1, tmp1, tmp2
                mtsr    cps, tmp1

                ; restore freeze mode registers.

                popspcl ops, tmp1, msp
                popspcl chc, tmp1, msp
                popspcl chd, tmp1, msp
                popspcl cha, tmp1, msp
                popspcl alu, tmp1, msp
                popspcl pc1, tmp1, msp
                popspcl pc0, tmp1, msp
        .endm

;
;*
;
        .equ    WS,     512                             ; window size
        .equ    RALLOC, 4 * 4                           ; stack alloc for C
        .equ    SIGCTX_UM_SIZE, 40 * 4                  ; 
        .equ    SIGCTX_RFB, (38) * 4                    ; user mode saved
        .equ    SIGCTX_SM_SIZE, 12 * 4                  ;
        .equ    SIGCTX_SIG, (11)*4 + SIGCTX_UM_SIZE     ;
        .equ    SIGCTX_GR1, (10)*4 + SIGCTX_UM_SIZE     ;
        .equ    SIGCTX_RAB, (9)*4 + SIGCTX_UM_SIZE      ;
        .equ    SIGCTX_PC0, (8)*4 + SIGCTX_UM_SIZE      ;
        .equ    SIGCTX_PC1, (7)*4 + SIGCTX_UM_SIZE      ;
        .equ    SIGCTX_PC2, (6)*4 + SIGCTX_UM_SIZE      ;
        .equ    SIGCTX_CHC, (3)*4 + SIGCTX_UM_SIZE      ;
        .equ    SIGCTX_OPS, (1)*4 + SIGCTX_UM_SIZE      ;
        .equ    SIGCTX_TAV, (0)*4 + SIGCTX_UM_SIZE      ;

        .macro  sup_sv
                add     it2, trapreg, 0                 ; transfer signal #
                sub     msp, msp, 4                     ;
                store   0, 0, it2, msp                  ; save signal number
                sub     msp, msp, 4                     ; push gr1

                store   0, 0, gr1, msp                  ; 
                sub     msp, msp, 4                     ; push rab
                store   0, 0, rab, msp                  ; 
                const   it0, WS                         ; Window size   

                sub     rab, rfb, it0                   ; set rab = rfb-512
                pushsr  msp, it0, PC0                   ; save program counter0
                pushsr  msp, it0, PC1                   ; save program counter1
                pushsr  msp, it0, PC2                   ; save program counter2

                pushsr  msp, it0, CHA                   ; save channel address
                pushsr  msp, it0, CHD                   ; save channel data
                pushsr  msp, it0, CHC                   ; save channel control
                pushsr  msp, it0, ALU                   ; save alu

                pushsr  msp, it0, OPS                   ; save ops
                sub     msp, msp, 4                     ; 
                store   0, 0, tav, msp                  ; push tav
                mtsrim  chc, 0                          ; no loadm/storem

                mfsr    it0, ops                        ; get ops value
                const   it1, (TD | DI)                  ; disable interrupts
                consth  it1, (TD | DI)                  ; disable interrupts
                or      it0, it0, it1                   ; set bits

                mtsr    ops, it0                        ; set new ops
                const   it0, sigcode                    ; signal handler
                consth  it0, sigcode                    ; signal handler
                mtsr    pc1, it0                        ; store pc1

                add     it1, it0, 4                     ; next addr
                mtsr    pc0, it1                        ; store pc1 location
                iret                                    ; return
                nop                                     ; ALIGN
        .endm

        .macro  sig_return
                mfsr    it0, cps                        ; get processor status
                const   it1, FZ|DA                      ; Freeze + traps disable
                or      it0, it0, it1                   ; to set FZ+DA
                mtsr    cps, it0                        ; in freeze mode

                load    0, 0, tav, msp                  ; restore tav
                add     msp, msp, 4                     ;
                
                popsr   OPS,it0, msp                    ;
                popsr   ALU,it0, msp                    ;
                popsr   CHC,it0, msp                    ;
                popsr   CHD,it0, msp                    ;

                popsr   CHA,it0, msp                    ;
                popsr   PC2,it0, msp                    ;
                popsr   PC1,it0, msp                    ;
                popsr   PC0,it0, msp                    ;

                load    0, 0, rab, msp                  ;
                add     msp, msp, 4                     ;
                load    0, 0, it0, msp                  ;
                add     gr1, it0, 0                     ; pop rsp

                add     msp, msp, 8                     ; discount signal #
                iret
        .endm

        .macro  repair_R_stack
                add     v0, msp, SIGCTX_GR1             ; interrupted gr1
                load    0, 0, v2, v0                    ;
                add     v0, msp, SIGCTX_RFB             ;
                load    0, 0, v3, v0                    ; interupted rfb

                const   v1, WS                          ;       
                sub     v1, v3, v1                      ; rfb-512
                cpltu   v0, v2, v1                      ; test gr1 < rfb-512
                jmpf    v0, $1                          ; 

                add     gr1, rab, 0                     ;
                add     v2, v1, 0                       ; set LB = rfb-512
$1:
;* if gr1 < rfb-512 yes LB = rfb-512 signalled during spill
;* if no, LB=gr1 interrupted cache < 126 registers
                cpleu   v0, v2, rfb                     ; test LB<=rfb
                jmpf    v0, $2                          ;
                nop                                     ;
                add     v2, rfb, 0                      ;
$2:
                cpeq    v0, v3, rfb                     ; fill rfb->'rfb
                jmpt    v0, $3                          ; if rfb==rfb'
                const   tav, (0x80<<2)                  ; prepare for fill
                or      tav, tav, v2                    ; 

                mtsr    IPA, tav                        ; IPA=LA<<2
                sub     tav, v3, gr98                   ; cache fill LA->rfb
                srl     tav, tav, 2                     ; convert to words
                sub     tav, tav, 1                     ; 

                mtsr    cr, tav                         ;
                loadm   0, 0, gr0, v2                   ; fill from LA->rfb
$3:
                add     rfb, v3, 0                      ; move rfb upto 'rfb
                sub     rab, v1, 0                      ; assign rab to rfb-512

                add     v0, msp, SIGCTX_GR1             ;
                load    0, 0, v2, v0                    ; v0 = interrupted gr1
                add     gr1, v2, 0                      ; move gr1 upto 'gr1
                nop                                     ;
        .endm   
                
        .macro  repair_regs
                mtsrim  cr, 29 - 1                      ; to restore locals
                loadm   0, 0, v0, msp                   ;
                add     msp, msp, 29*4                  ; 
                popsr   Q, tav, msp                     ; 

                popsr   IPC, tav, msp                   ; 
                popsr   IPB, tav, msp                   ; 
                popsr   IPA, tav, msp                   ; 
                pop     FPStat3, msp                    ; floating point regs

                pop     FPStat2, msp                    ; floating point regs
                pop     FPStat1, msp                    ; floating point regs
                pop     FPStat0, msp                    ; floating point regs

                add     msp, msp, 3*4                   ; R-stack repaired
        .endm

;
;*HIF related...
;




; send the message in bufaddr to Montip.
        .macro  SendMessageToMontip,    bufaddr
        const   lr2, bufaddr
$1:
        call    lr0, _msg_send
        consth  lr2, bufaddr
        cpeq    gr96, gr96, 0
        jmpf    gr96, $1
        const   lr2, bufaddr
        .endm

; build a HIF_CALL message in bufaddr to send to montip.
        .macro  BuildHIFCALLMsg,        bufaddr, tmp1, tmp2
        const   tmp1, bufaddr
        consth  tmp1, bufaddr
        const   tmp2, HIF_CALL_MSGCODE
        store   0, 0, tmp2, tmp1        ; msg code
        add     tmp1, tmp1, 4
        const   tmp2, HIF_CALL_MSGLEN   
        store   0, 0, tmp2, tmp1        ; msg len
        add     tmp1, tmp1, 4
        store   0, 0, gr121, tmp1       ; service number
        add     tmp1, tmp1, 4
        store   0, 0, lr2, tmp1         ; lr2
        add     tmp1, tmp1, 4
        store   0, 0, lr3, tmp1         ; lr3
        add     tmp1, tmp1, 4
        store   0, 0, lr4, tmp1         ; lr4
        .endm

;
;* 
;* All the funky AMD style macros go in here...simply for 
;* compatility
;
;
  .macro        IMPORT, symbol
        .extern symbol
  .endm

  .macro        GLOBAL, symbol
        .global symbol
  .endm

  .macro        USESECT, name, type
        .sect   name, type
        .use    name
  .endm

  .macro        SECTION, name, type
        .sect   name, type
  .endm

 .macro FUNC, fname, lineno
        .global fname
fname:
 .endm

 .macro ENDFUNC, fname, lineno
 .endm

;*************************************LONG
 .macro LONG, varname
varname:
        .block  4
 .endm

;*************************************UNSIGNED LONG
 .macro ULONG, varname
varname:
        .block  4
 .endm

;*************************************SHORT
 .macro SHORT, varname
varname:
        .block  2
 .endm

;*************************************CHAR
 .macro CHAR, varname
varname:
        .block  1
 .endm 

;*************************************LONGARRAY
 .macro LONGARRAY, name, count
name:
        .block  count*4
 .endm

;*************************************SHORTARRAY

 .macro SHORTARRAY, name, count
name:
        .block  count*2
 .endm

;*************************************CHARARRAY

 .macro CHARARRAY, name, count
name:
        .block  count
 .endm


;*************************************VOID_FPTR

 .macro VOID_FPTR, name
name:
        .block  4
 .endm
Go to most recent revision | Compare with Previous | Blame | View Log
Browse

Tools

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rtems-20020807/] [c/] [src/] [lib/] [libbsp/] [a29k/] [portsw/] [start/] [pswmacro.ah] - Rev 1026
