Subversion Repositories or1k

/* macros.inc
 *
 * This file assists the board independent startup code
 * by initializing the chip-select channels to 
 * reflect the proper memory configuration.
 *
 * NOTE: No stack has been established when this routine        
 *       is invoked.  It returns to start.s through ldsegs
 *
 *  Submitted by:
 *
 *    Erik Ivanenko
 *    University of Toronto
 *    erik.ivanenko@utoronto.ca
 *
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *  http://www.OARcorp.com/rtems/license.html.
 *
 *  macros.inc,v 1.1 1999/04/23 16:35:11 joel Exp
 */

.set GDT_CODE_PTR       , 0x08
.set GDT_DATA_PTR       , 0x10  

.set BOARD_SELECT  , 0x301
.set BOARD_DATA    , 0x302
.set BOARD_LATCH   , 0x303


#define SetExRegByte(_register,_value) \
        movb       $ ## _value, al; \
        movw      $ ## _register, dx; \
        outb       al, dx

#define SetExRegWord(_register,_value) \
        movw      $ ## _value, ax; \
        movw      $ ## _register, dx ; \
        outw      ax, dx


#define DESC2(lim_0_15, bas_0_15, bas_16_23, access, gran, bas_24_31) \
 .word lim_0_15 ; \
 .word bas_0_15 ; \
 .byte bas_16_23 ; \
 .byte access ; \
 .byte gran ; \
 .byte bas_24_31

#define DESC3( _base, _limit) \
.word _limit ; \
.long _base

/* THE GET_ACCESS IS CHANGED FROM 8E TO 9E */

#define INTERRUPT_GATE( _vector ) \
        .word   _vector ; \
        .word   GDT_CODE_PTR ; \
        .byte   0x0 ; \
        .byte   0x8E ; \
        .word   0x0

#define rLOAD_INDEX( _selector, _segment_register) \
        movl     _selector , _segment_register ; \
        addb    al, ( eax )

#define rLOAD_SEGMENT( _reg, _segment_register) \
        mov     _reg , _segment_register ; \

/* #define rLOAD_SEGMENT( _reg, _segment_register) \
        .code16 ; \
        mov     _reg , _segment_register ; \
        .code32 
*/
#define pLOAD_SEGMENT( _selector, _segment_register) \
        movl     $ ##  _selector , eax ; .code16 ; \
        mov      ax, _segment_register ; .code32 

/* #define MOVE_WORD( _immed32, _reg ) \
        data16 ; \
        movl    _immed32, _reg
*/

#define MOVE_WORD( _immed32, _reg ) \
        movw    _immed32, _reg

/* #define MOVE_IMMED_WORD( _immed32, _reg ) \
        data16 ; \
        mov    $ ## _immed32, _reg

#define CS_OFF( _cs_symbol, _reg ) \
        data16 ; \
        mov     _cs_symbol, _reg ; \
        data16 ;\
        andl    $0x000ffff, _reg

#define _16_NOPS \
        nop ; \
        nop ; \
        nop ; \
        nop ; \
        nop ; \
        nop ; \
        nop ; \
        nop ; \
        nop ; \
        nop ; \
        nop ; \
        nop ; \
        nop ; \
        nop ; \
        nop ; \
        nop ; 
*/