Subversion Repositories or1k

/*  bsp.h
 *
 *  This include file contains some definitions specific to the
 *  JMR3904 simulator in gdb.
 *
 *  COPYRIGHT (c) 1989-2000.
 *  On-Line Applications Research Corporation (OAR).
 *
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *  http://www.OARcorp.com/rtems/license.html.
 *
 *  bsp.h,v 1.7 2001/05/24 20:10:32 joel Exp
 */
 
#ifndef __JMR3904_h
#define __JMR3904_h
 
#ifdef __cplusplus
extern "C" {
#endif
 
#include <bspopts.h>
 
#include <rtems.h>
#include <iosupp.h>
#include <console.h>
#include <clockdrv.h>
#include <libcpu/tx3904.h>
 
/*
 *  Define the time limits for RTEMS Test Suite test durations.
 *  Long test and short test duration limits are provided.  These
 *  values are in seconds and need to be converted to ticks for the
 *  application.
 *
 */
 
#define MAX_LONG_TEST_DURATION       300 /* 5 minutes = 300 seconds */
#define MAX_SHORT_TEST_DURATION      3   /* 3 seconds */
 
/*
 *  Define the interrupt mechanism for Time Test 27
 *
 *  NOTE: Following are for XXX and are board independent
 *
 */
 
#define MUST_WAIT_FOR_INTERRUPT 1
 
#if 0
#define Install_tm27_vector( handler ) \
    (void) set_vector( handler, TX3904_IRQ_SOFTWARE_1, 1 ); \
 
#define Cause_tm27_intr() \
    asm volatile ( "syscall 0x01" : : );
 
#define CLOCK_VECTOR TX3904_IRQ_TMR0
 
#define Clear_tm27_intr()  
 
#define Lower_tm27_intr()
#else
#define Install_tm27_vector( handler ) \
    (void) set_vector( handler, TX3904_IRQ_TMR0, 1 ); \
 
#define Cause_tm27_intr() \
  do { \
    unsigned32 _clicks = 20; \
    TX3904_TIMER_WRITE( TX3904_TIMER0_BASE, TX3904_TIMER_CCDR, 0x3 ); \
    TX3904_TIMER_WRITE( TX3904_TIMER0_BASE, TX3904_TIMER_CPRA, _clicks ); \
    TX3904_TIMER_WRITE( TX3904_TIMER0_BASE, TX3904_TIMER_TISR, 0x00 ); \
    TX3904_TIMER_WRITE( TX3904_TIMER0_BASE, TX3904_TIMER_ITMR, 0x8001 ); \
    TX3904_TIMER_WRITE( TX3904_TIMER0_BASE, TX3904_TIMER_TCR,   0xC0 ); \
    *((volatile unsigned32 *) 0xFFFFC01C) = 0x00000700; \
  } while(0)
 
#define Clear_tm27_intr() \
  do { \
    TX3904_TIMER_WRITE( TX3904_TIMER0_BASE, TX3904_TIMER_ITMR, 0x0001 ); \
    TX3904_TIMER_WRITE( TX3904_TIMER0_BASE, TX3904_TIMER_CCDR, 0x3 ); \
    TX3904_TIMER_WRITE( TX3904_TIMER0_BASE, TX3904_TIMER_TISR,   0x00 ); \
  } while(0)
 
#define Lower_tm27_intr() \
  mips_enable_in_interrupt_mask( 0xff01 );
 
#endif
 
/* Constants */
 
/* miscellaneous stuff assumed to exist */
 
extern rtems_configuration_table BSP_Configuration;
 
/*
 *  Device Driver Table Entries
 */
 
/*
 * NOTE: Use the standard Console driver entry
 */
 
/*
 * NOTE: Use the standard Clock driver entry
 */
 
/* functions */
 
void bsp_cleanup( void );
 
rtems_isr_entry set_vector(
  rtems_isr_entry, rtems_vector_number, int );
 
#ifdef __cplusplus
}
#endif
 
#endif
/* end of include file */