Subversion Repositories or1k

/*

Based upon IDT provided code with the following release:

This source code has been made available to you by IDT on an AS-IS
basis. Anyone receiving this source is licensed under IDT copyrights
to use it in any way he or she deems fit, including copying it,
modifying it, compiling it, and redistributing it either with or
without modifications.  No license under IDT patents or patent
applications is to be implied by the copyright license.

Any user of this software should understand that IDT cannot provide
technical support for this software and will not be responsible for
any consequences resulting from the use of this software.

Any person who transfers this source code or any derivative work must
include the IDT copyright notice, this paragraph, and the preceeding
two paragraphs in the transferred software.

COPYRIGHT IDT CORPORATION 1996
LICENSED MATERIAL - PROGRAM PROPERTY OF IDT

  idttlb.S,v 1.2 1999/03/31 23:21:19 joel Exp
*/


/*
**      idttlb.s - fetch the registers associated with and the contents
**                 of the tlb.
**
*/
/* 950308: Ketan patched a few tlb functions that would not have worked.*/
#include <iregdef.h>
#include <idtcpu.h>
#include <idtmon.h>


        .text

#if defined(CPU_R3000)
/*
** ret_tlblo -- returns the 'entrylo' contents for the TLB
**      'c' callable - as ret_tlblo(index) - where index is the
**      tlb entry to return the lo value for - if called from assembly
**      language then index should be in register a0.
*/
FRAME(ret_tlblo,sp,0,ra)
        .set    noreorder
        mfc0    t0,C0_SR                # save sr
        nop
        and     t0,~SR_PE               # dont inadvertantly clear PE
        mtc0    zero,C0_SR              # clear interrupts
        mfc0    t1,C0_TLBHI             # save pid
        sll     a0,TLBINX_INXSHIFT      # position index
        mtc0    a0,C0_INX               # write to index register
        nop
        tlbr                            # put tlb entry in entrylo and hi
        nop
        mfc0    v0,C0_TLBLO             # get the requested entry lo
        mtc0    t1,C0_TLBHI             # restore pid
        mtc0    t0,C0_SR                # restore status register
        j       ra
        nop
        .set    reorder
ENDFRAME(ret_tlblo)
#endif
#if defined(CPU_R4000)
/*
** ret_tlblo[01] -- returns the 'entrylo' contents for the TLB
**      'c' callable - as ret_tlblo(index) - where index is the
**      tlb entry to return the lo value for - if called from assembly
**      language then index should be in register a0.
*/
FRAME(ret_tlblo0,sp,0,ra)
        mfc0    t0,C0_SR                # save sr
        mtc0    zero,C0_SR              # clear interrupts
        mfc0    t1,C0_TLBHI             # save pid
        mtc0    a0,C0_INX               # write to index register
        .set noreorder
        nop; nop; nop; nop; nop; nop; nop; nop
        .set reorder
        tlbr                            # put tlb entry in entrylo and hi
        .set noreorder
        nop; nop; nop; nop; nop; nop; nop; nop
        .set reorder
        mfc0    v0,C0_TLBLO0            # get the requested entry lo
        mtc0    t1,C0_TLBHI             # restore pid
        mtc0    t0,C0_SR                # restore status register
        j       ra
ENDFRAME(ret_tlblo0)

FRAME(ret_tlblo1,sp,0,ra)
        mfc0    t0,C0_SR                # save sr
        mtc0    zero,C0_SR              # clear interrupts
        mfc0    t1,C0_TLBHI             # save pid
        mtc0    a0,C0_INX               # write to index register
        .set noreorder
        nop; nop; nop; nop; nop; nop; nop; nop
        .set reorder
        tlbr                            # put tlb entry in entrylo and hi
        .set noreorder
        nop; nop; nop; nop; nop; nop; nop; nop
        .set reorder
        mfc0    v0,C0_TLBLO1            # get the requested entry lo
        mtc0    t1,C0_TLBHI             # restore pid
        mtc0    t0,C0_SR                # restore status register
        j       ra
ENDFRAME(ret_tlblo1)

/*
** ret_pagemask(index) -- return pagemask contents of tlb entry "index"
*/
FRAME(ret_pagemask,sp,0,ra)
        mfc0    t0,C0_SR                # save sr
        mtc0    zero,C0_SR              # disable interrupts
        mfc0    t1,C0_TLBHI             # save current pid
        mtc0    a0,C0_INX               # drop it in C0 register
        .set noreorder
        nop; nop; nop; nop; nop; nop; nop; nop
        .set reorder
        tlbr                            # read entry to entry hi/lo
        .set noreorder
        nop; nop; nop; nop; nop; nop; nop; nop
        .set reorder
        mfc0    v0,C0_PAGEMASK          # to return value
        mtc0    t1,C0_TLBHI             # restore current pid
        mtc0    t0,C0_SR                # restore sr
        j       ra
ENDFRAME(ret_pagemask)

/*
** ret_tlbwired(void) -- return wired register
*/
FRAME(ret_tlbwired,sp,0,ra)
        mfc0    v0,C0_WIRED
        j       ra
ENDFRAME(ret_tlbwired)
#endif

/*
** ret_tlbhi -- return the tlb entry high content for tlb entry
**                      index
*/
FRAME(ret_tlbhi,sp,0,ra)
#if defined(CPU_R3000)
        .set    noreorder
        mfc0    t0,C0_SR                # save sr
        nop
        and     t0,~SR_PE
        mtc0    zero,C0_SR              # disable interrupts
        mfc0    t1,C0_TLBHI             # save current pid
        sll     a0,TLBINX_INXSHIFT      # position index
        mtc0    a0,C0_INX               # drop it in C0 register
        nop
        tlbr                            # read entry to entry hi/lo
        nop
        mfc0    v0,C0_TLBHI             # to return value
        mtc0    t1,C0_TLBHI             # restore current pid
        mtc0    t0,C0_SR                # restore sr
        j       ra
        nop
        .set    reorder
#endif
#if defined(CPU_R4000)
        mfc0    t0,C0_SR                # save sr
        mtc0    zero,C0_SR              # disable interrupts
        mfc0    t1,C0_TLBHI             # save current pid
        mtc0    a0,C0_INX               # drop it in C0 register
        .set noreorder
        nop; nop; nop; nop; nop; nop; nop; nop
        .set reorder
        tlbr                            # read entry to entry hi/lo0/lo1/mask
        .set noreorder
        nop; nop; nop; nop; nop; nop; nop; nop
        .set reorder
        mfc0    v0,C0_TLBHI             # to return value
        mtc0    t1,C0_TLBHI             # restore current pid
        mtc0    t0,C0_SR                # restore sr
        j       ra
#endif
ENDFRAME(ret_tlbhi)

/*
** ret_tlbpid() -- return tlb pid contained in the current entry hi
*/
FRAME(ret_tlbpid,sp,0,ra)
#if defined(CPU_R3000)
        .set    noreorder
        mfc0    v0,C0_TLBHI             # fetch tlb high 
        nop
        and     v0,TLBHI_PIDMASK        # isolate and position
        srl     v0,TLBHI_PIDSHIFT
        j       ra
        nop
        .set    reorder
#endif
#if defined(CPU_R4000)
        mfc0    v0,C0_TLBHI     # to return value
        nop
        and     v0,TLBHI_PIDMASK
        j       ra
#endif
ENDFRAME(ret_tlbpid)

/*
** tlbprobe(address, pid) -- probe the tlb to see if address is currently
**                              mapped
**      a0 = vpn  - virtual page numbers are 0=0 1=0x1000, 2=0x2000...
**                      virtual page numbers for the r3000 are in
**                      entry hi bits 31-12
**      a1 = pid  - this is a process id ranging from 0 to 63
**                  this process id is shifted left 6 bits and or'ed into
**                  the entry hi register
**      returns an index value (0-63) if successful -1 -f not
*/
FRAME(tlbprobe,sp,0,ra)
#if defined(CPU_R3000)
        .set    noreorder
        mfc0    t0,C0_SR                /* fetch status reg */
        and     a0,TLBHI_VPNMASK        /* isolate just the vpn */
        and     t0,~SR_PE               /* don't inadvertantly clear pe */
        mtc0    zero,C0_SR 
        mfc0    t1,C0_TLBHI     
        sll     a1,TLBHI_PIDSHIFT       /* possition the pid */
        and     a1,TLBHI_PIDMASK
        or      a0,a1                   /* build entry hi value */
        mtc0    a0,C0_TLBHI
        nop
        tlbp                            /* do the probe */
        nop
        mfc0    v1,C0_INX
        li      v0,-1
        bltz    v1,1f
        nop
        sra     v0,v1,TLBINX_INXSHIFT   /* get index positioned for return */
1:
        mtc0    t1,C0_TLBHI             /* restore tlb hi */
        mtc0    t0,C0_SR                /* restore the status reg */
        j       ra
        nop
        .set    reorder
#endif
#if defined(CPU_R4000)
        mfc0    t0,C0_SR                # save sr
        mtc0    zero,C0_SR              # disable interrupts
        mfc0    t1,C0_TLBHI             # save current pid
        and     a0,TLBHI_VPN2MASK       # construct tlbhi for probe
        and     a1,TLBHI_PIDMASK
        or      a0,a1
        mtc0    a0,C0_TLBHI
        .set noreorder
        nop; nop; nop; nop; nop; nop; nop; nop
        .set reorder
        tlbp                            # probe entry to entry hi/lo0/lo1/mask
        .set noreorder
        nop; nop; nop; nop; nop; nop; nop; nop
        .set reorder
        mfc0    v1,C0_INX
        li      v0,-1
        bltz    v1,1f
        move    v0,v1
1:      mtc0    t1,C0_TLBHI             # restore current pid
        mtc0    t0,C0_SR                # restore sr
        j       ra
#endif
ENDFRAME(tlbprobe)

/*
** resettlb(index) Invalidate the  TLB entry specified by index
*/
FRAME(resettlb,sp,0,ra)
#if defined(CPU_R3000)
        .set    noreorder
        mfc0    t0,C0_TLBHI             # fetch the current hi 
        mfc0    v0,C0_SR                # fetch the status reg.
        li      t2,K0BASE&TLBHI_VPNMASK
        and     v0,~SR_PE               # dont inadvertantly clear PE
        mtc0    zero,C0_SR
        mtc0    t2,C0_TLBHI             # set up tlbhi
        mtc0    zero,C0_TLBLO
        sll     a0,TLBINX_INXSHIFT
        mtc0    a0,C0_INX
        nop
        tlbwi                           # do actual invalidate
        nop
        mtc0    t0,C0_TLBHI
        mtc0    v0,C0_SR
        j       ra
        nop
        .set    reorder
#endif
#if defined(CPU_R4000)
        li      t2,K0BASE&TLBHI_VPN2MASK
        mfc0    t0,C0_TLBHI             # save current TLBHI
        mfc0    v0,C0_SR                # save SR and disable interrupts
        mtc0    zero,C0_SR
        mtc0    t2,C0_TLBHI             # invalidate entry
        mtc0    zero,C0_TLBLO0
        mtc0    zero,C0_TLBLO1
        mtc0    a0,C0_INX
        .set noreorder
        nop; nop; nop; nop; nop; nop; nop; nop
        .set reorder
        tlbwi
        .set noreorder
        nop; nop; nop; nop; nop; nop; nop; nop
        .set reorder
        mtc0    t0,C0_TLBHI
        mtc0    v0,C0_SR
        j       ra
#endif
ENDFRAME(resettlb)

#if defined(CPU_R3000)
/*
** Setup TLB entry
**
** map_tlb(index, tlbhi, phypage)
**      a0  =  TLB entry index
**      a1  =  virtual page number and PID
**      a2  =  physical page
*/
FRAME(map_tlb,sp,0,ra)
        .set    noreorder
        sll     a0,TLBINX_INXSHIFT
        mfc0    v0,C0_SR                # fetch the current status
        mfc0    a3,C0_TLBHI             # save the current hi
        and     v0,~SR_PE               # dont inadvertantly clear parity

        mtc0    zero,C0_SR
        mtc0    a1,C0_TLBHI             # set the hi entry
        mtc0    a2,C0_TLBLO             # set the lo entry 
        mtc0    a0,C0_INX               # load the index
        nop
        tlbwi                           # put the hi/lo in tlb entry indexed
        nop
        mtc0    a3,C0_TLBHI             # put back the tlb hi reg 
        mtc0    v0,C0_SR                # restore the status register 
        j       ra
        nop
        .set    reorder
ENDFRAME(map_tlb)
 #endif
#if defined(CPU_R4000)
/*
** Setup R4000 TLB entry
**
** map_tlb4000(mask_index, tlbhi, pte_even, pte_odd)
**      a0  =  TLB entry index and page mask
**      a1  =  virtual page number and PID
**      a2  =  pte -- contents of even pte
**      a3  =  pte -- contents of odd pte
*/
FRAME(map_tlb4000,sp,0,ra)
        and     t2,a0,TLBPGMASK_MASK
        and     a0,TLBINX_INXMASK
        mfc0    t1,C0_TLBHI             # save current TLBPID
        mfc0    v0,C0_SR                # save SR and disable interrupts
        mtc0    zero,C0_SR
        mtc0    t2,C0_PAGEMASK          # set 
        mtc0    a1,C0_TLBHI             # set VPN and TLBPID
        mtc0    a2,C0_TLBLO0            # set PPN and access bits
        mtc0    a3,C0_TLBLO1            # set PPN and access bits
        mtc0    a0,C0_INX               # set INDEX to wired entry
        .set noreorder
        nop; nop; nop; nop; nop; nop; nop; nop
        .set reorder
        tlbwi                           # drop it in
        .set noreorder
        nop; nop; nop; nop; nop; nop; nop; nop
        .set reorder
        mtc0    t1,C0_TLBHI             # restore TLBPID
        mtc0    v0,C0_SR                # restore SR
        j       ra
ENDFRAME(map_tlb4000)
#endif


/*
** Set current TLBPID. This assumes PID is positioned correctly in reg.
**                      a0.
*/
FRAME(set_tlbpid,sp,0,ra)
        .set    noreorder
        mtc0    a0,C0_TLBHI
        j       ra
        nop
        .set    reorder
ENDFRAME(set_tlbpid)