URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [rtems-20020807/] [c/] [src/] [lib/] [libbsp/] [powerpc/] [eth_comm/] [configure.ac] - Rev 1765
Compare with Previous | Blame | View Log
## Process this file with autoconf to produce a configure script.
##
## configure.ac,v 1.6 2002/04/08 18:28:09 joel Exp
AC_PREREQ(2.52)
AC_INIT([rtems-c-src-lib-libbsp-powerpc-eth_comm],[_RTEMS_VERSION],[rtems-bugs@OARcorp.com])
AC_CONFIG_SRCDIR([bsp_specs])
RTEMS_TOP(../../../../../..)
AC_CONFIG_AUX_DIR(../../../../../..)
RTEMS_CANONICAL_TARGET_CPU
AM_INIT_AUTOMAKE([no-define foreign 1.6])
RTEMS_BSP_CONFIGURE
RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm])
RTEMS_CANONICALIZE_TOOLS
RTEMS_CHECK_NETWORKING
AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
# FIXME: Explanation cloned from mbx8xx
RTEMS_BSPOPTS_SET([UARTS_IO_MODE],[*],[0])
RTEMS_BSPOPTS_HELP([UARTS_IO_MODE],
[(BSP--console driver)
Define to 0 or 1 if you want polled I/O performed by RTEMS.
Define to 1 if you want interrupt-driven performed by RTEMS.
Define to 2 if you want polled I/O performed by EPPCBug.
There is no provision to have a mix of interrupt-driven and polled I/O
ports, except that the printk port may use a different mode from the
other ports. If this is done, do not open the printk port from an RTEMS
application. With EPPCBug 1.1, if mode 2 is selected, CONSOLE_MINOR
must be set to SMC1_MINOR. This is a deficiency of the firmware: it
does not perform serial I/O on any port other than its default debug
port, which must be SMC1.])
RTEMS_BSPOPTS_SET([DISPATCH_HANDLER_STAT],[*],[])
RTEMS_BSPOPTS_HELP([DISPATCH_HANDLER_STAT],
[used by irq/irq.c])
# Explicitly list all Makefiles here
AC_CONFIG_FILES([Makefile
clock/Makefile
canbus/Makefile
console/Makefile
include/Makefile
irq/Makefile
network/Makefile
start/Makefile
startup/Makefile
vectors/Makefile
wrapup/Makefile])
RTEMS_PPC_EXCEPTIONS([new])
AC_OUTPUT