OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [rtems-20020807/] [c/] [src/] [lib/] [libbsp/] [powerpc/] [motorola_powerpc/] [BOOTING] - Rev 1765

Compare with Previous | Blame | View Log

#
#  BOOTING,v 1.1 1999/11/17 15:42:18 joel Exp
#

This file documents the on board monitor (PPCBUG) configuration used
to be able to boot the archives located in powerpc-rtems/c/mcp750/bin.
This information was provided by Eric Valette <valette@crf.canon.fr>

----------------------- ENV command--------------
PPC1-Bug>env
Bug or System environment [B/S] = B? 
Field Service Menu Enable [Y/N] = N? 
Probe System for Supported I/O Controllers [Y/N] = Y? 
Auto-Initialize of NVRAM Header Enable [Y/N] = Y? 
Network PReP-Boot Mode Enable [Y/N] = Y?                <====================
SCSI Bus Reset on Debugger Startup [Y/N]   = N? 
Primary SCSI Bus Negotiations Type [A/S/N] = A? 
Primary SCSI Data Bus Width [W/N]          = N? 
Secondary SCSI Identifier                  = "07"? 
NVRAM Boot List (GEV.fw-boot-path) Boot Enable [Y/N]           = Y? 
NVRAM Boot List (GEV.fw-boot-path) Boot at power-up only [Y/N] = Y? 
NVRAM Boot List (GEV.fw-boot-path) Boot Abort Delay            = 5? 
Auto Boot Enable [Y/N]           = Y? 
Auto Boot at power-up only [Y/N] = Y? 
Auto Boot Scan Enable [Y/N]      = Y? 
Auto Boot Scan Device Type List  = FDISK/CDROM/TAPE/HDISK/? 
Auto Boot Controller LUN   = 14? 
Auto Boot Device LUN       = 40? 
Auto Boot Partition Number = 03? 
Auto Boot Abort Delay      = 7? 
Auto Boot Default String [NULL for an empty string] = ? 
ROM Boot Enable [Y/N]            = N? 
ROM Boot at power-up only [Y/N]  = Y? 
ROM Boot Abort Delay             = 5? 
ROM Boot Direct Starting Address = FFF00000? 
ROM Boot Direct Ending Address   = FFFFFFFC? 
Network Auto Boot Enable [Y/N]           = N? 
Network Auto Boot at power-up only [Y/N] = N? 
Network Auto Boot Controller LUN = 00? 
Network Auto Boot Device LUN     = 00? 
Network Auto Boot Abort Delay    = 5? 
Network Auto Boot Configuration Parameters Offset (NVRAM) = 00001000? 
Memory Size Enable [Y/N]         = Y? 
Memory Size Starting Address     = 00000000? 
Memory Size Ending Address       = 02000000? 
DRAM Speed in NANO Seconds       = 60? 
ROM First Access Length (0 - 31) = 10? 
ROM Next Access Length  (0 - 15) = 0? 
DRAM Parity Enable [On-Detection/Always/Never - O/A/N]    = O? 
L2Cache Parity Enable [On-Detection/Always/Never - O/A/N] = O? 
PCI Interrupts Route Control Registers (PIRQ0/1/2/3) = 0A050000? 
Serial Startup Code Master Enable [Y/N] = N? 
Serial Startup Code LF Enable [Y/N] =     N? 
---------------------NIOT ---------------------------
PPC1-Bug>niot
Controller LUN =00? 
Device LUN     =00? 
Node Control Memory Address =03F9E000? 
Client IP Address      =194.2.81.157? 
Server IP Address      =194.2.81.241? 
Subnet IP Address Mask =255.255.255.0? 
Broadcast IP Address   =255.255.255.255? 
Gateway IP Address     =194.2.81.254? 
Boot File Name ("NULL" for None)     =debug-ppc? 
Argument File Name ("NULL" for None) =? 
Boot File Load Address         =001F0000? 
Boot File Execution Address    =001F0000? 
Boot File Execution Delay      =00000000? 
Boot File Length               =00000000? 
Boot File Byte Offset          =00000000? 
BOOTP/RARP Request Retry       =05? 
TFTP/ARP Request Retry         =05? 
Trace Character Buffer Address =00000000? 
BOOTP/RARP Request Control: Always/When-Needed (A/W)=W? 
BOOTP/RARP Reply Update Control: Yes/No (Y/N)       =Y? 
--------------------------------------------------------


Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.