Subversion Repositories or1k

2002-07-25      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * bootloader/Makefile.am: Install bootloader.o.
        Install bootloader/bootloader.ppcboot.lds.

2002-07-24      Joel Sherrill <joel@OARcorp.com>

        * vectors/Makefile.am: Install bsp/vectors.h.

2002-07-24      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * include/Makefile.am: Fix preinstallation.
        * bootloader: Eliminate $(INCLUDES).

2002-07-21      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * start/Makefile.am: Eliminate PGM.
        Add bsplib_DATA = $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o.

2002-07-20      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * startup/Makefile.am: Add bsplib_DATA = linkcmds.

2002-07-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * wrapup/Makefile.am: Eliminate TMPINSTALL_FILES.
        Remove $(OBJS) from all-local.

2002-06-29      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * wrapup/Makefile.am: Remove preinstallation of libbsp.a,

2001-05-14      Till Straumann <strauman@slac.stanford.edu>

        * bootloader/Makefile.am, console/Makefile.am, pci/Makefile.am:
        Per PR216, "libbsp/powerpc/shared" BSP has been modified considerably
        with the goal to make it more flexible and reusable by other
        BSPs. The main strategies were:
            - eliminate hardcoded base addresses; devices use offsets
              and a BSP defined base address.
            - separate functionality into different files (e.g. reboot from
              inch.c to reboot.c) which can be overridden by a 'derived' BSP.
            - separate initialization code into separate files (e.g.  PCI
              bridge detection/initialization was separated from the more
              generic PCI access routines), also to make it easier for
              'derived' BSPs to substitute their own initialization code.
        There are also a couple of enhancements and fixes:
            - IRQ handling code now has a hook for attaching a VME bridge.
            - OpenPIC is now explicitely initialized (polarities, senses).
              Eliminated the implicit assumption on the presence of an ISA PIC.
            - UART and console driver now supports more than 1 port. The current
              maximum of 2 can easily be extended by enlarging a table (it
              would even be easier if the ISR API was not broken by design).
            - fixed polled_io.c so it correctly supports console on COM2
            - fixed TLB invalidation code (start.S).
            - exception handler prints a stack backtrace.
            - added BSP_pciFindDevice() to scan the pci bus for a particular
              vendor/device/instance.

2001-05-09      Joel Sherrill <joel@OARcorp.com>

        * startup/linkcmds: In support of gcc 3.1, added one of more
        of the sections .jcr, .rodata*, .data.*, .gnu.linkonce.s2.*,
        .gnu.linkonce.sb2.*, and .gnu.linkonce.s.*.  Spacing corrections
        and direction of segments to memory regions may also have been
        addressed.  This was a sweep across all BSPs.
 
2001-04-08      Joel Sherrill <joel@OARcorp.com>

        * startup/linkcmds: Per PR170, PR171, and PR172 add .eh_frame 
 
2002-04-02      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * bootloader/Makefile.am: Use automake-1.6 AS compilation rules.

2001-04-02      Joel Sherrill <joel@OARcorp.com>

        * bootloader/Makefile.am: Use AM_CCASFLAGS instead of AM_ASFLAGS.

2002-03-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * configure.ac:
        AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).
        AM_INIT_AUTOMAKE([no-define foreign 1.6]).
        * bootloader/Makefile.am: Remove AUTOMAKE_OPTIONS.
        * Makefile.am: Remove AUTOMAKE_OPTIONS.
        * clock/Makefile.am: Remove AUTOMAKE_OPTIONS.
        * console/Makefile.am: Remove AUTOMAKE_OPTIONS.
        * include/Makefile.am: Remove AUTOMAKE_OPTIONS.
        * irq/Makefile.am: Remove AUTOMAKE_OPTIONS.
        * motorola/Makefile.am: Remove AUTOMAKE_OPTIONS.
        * openpic/Makefile.am: Remove AUTOMAKE_OPTIONS.
        * pci/Makefile.am: Remove AUTOMAKE_OPTIONS.
        * residual/Makefile.am: Remove AUTOMAKE_OPTIONS.
        * start/Makefile.am: Remove AUTOMAKE_OPTIONS.
        * startup/Makefile.am: Remove AUTOMAKE_OPTIONS.
        * vectors/Makefile.am: Remove AUTOMAKE_OPTIONS.
        * wrapup/Makefile.am: Remove AUTOMAKE_OPTIONS.

2001-12-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * configure.ac: Remove RTEMS_ENABLE_NETWORKING.

2001-11-30      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * configure.ac: Introduce RTEMS_BSP_CONFIGURE.

2001-11-21      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * Makefile.am: Add @exceptions@ to SUBDIRS; 
        Remove need_motorola_powerpc.
        * configure.ac: Apply RTEMS_BSPOPTS_*(*) to merge-in settings from
        make/custom/mcp750.cfg, make/custom/mvme2307.cfg;
        Remove need_motorola_powerpc;
        Add RTEMS_PPC_EXCEPTIONS([new]).
        * include/Makefile.am: Replace PREINSTALL_FILES with
        TMPINSTALL_FILES, include force-preinstall.am.
        * wrapup/Makefile.am: Apply @exceptions@.

2001-11-10      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * configure.ac: Add bspopts.h.
        * include/.cvsignore: Add stamp-h* and bspopts.h*.
        * include/Makefile.am: Add bspopts.h.
        * pci/Makefile.am: Append -O2 to AM_CFLAGS.

2001-11-08      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * bootloader/Makefile.am: completely reworked.
        * configure.ac: Add AM_PROG_AS.

2001-10-25      Joel Sherrill <joel@OARcorp.com>

        * startup/linkcmds: Added _init and _fini.

2001-10-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * .cvsignore: Add autom4te.cache for autoconf > 2.52.
        * configure.in: Remove.
        * configure.ac: New file, generated from configure.in by autoupdate.

2001-09-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * include/Makefile.am: Use 'PREINSTALL_FILES ='.
        * residual/Makefile.am: Use 'PREINSTALL_FILES ='.
        * vectors/Makefile.am: Use 'PREINSTALL_FILES ='.
        * pci/Makefile.am: Use 'PREINSTALL_FILES ='.
        * openpic/Makefile.am: Use 'PREINSTALL_FILES ='.
        * bootloader/Makefile.am: Use 'CLEANFILES ='.

2001-05-10      Ralf Corsepius  <corsepiu@faw.uni-ulm.de>

        * configure.in: Use RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm]).

2001-01-03      Emmanuel Raguet <raguet@crf.canon.fr>

        * bootloader/Makefile.am: Modified to install bootloader so
        make-exe rule can avoid writing to install point or assuming
        BSP build tree is available.

2000-11-09      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS.

2000-11-02      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * Makefile.am: Switch to ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal.

2000-10-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros.
        Switch to GNU canonicalization.

2000-09-29      Charles-Antoine Gauthier <charles.gauthier@nrc.ca>

        * startup/linkcmds: Added lines so DWARF debug information
        would be available.  Otherwise gdb complains that the offsets
        for the debug info are incorrect and doesn't load the files.

2000-09-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>

        * bootloader/Makefile.am, clock/Makefile.am, console/Makefile.am,
        irq/Makefile.am, motorola/Makefile.am, openpic/Makefile.am,
        pci/Makefile.am, residual/Makefile.am, start/Makefile.am,
        startup/Makefile.am, vectors/Makefile.am, wrapup/Makefile.am:
        Include compile.am

2000-08-10      Joel Sherrill <joel@OARcorp.com>

        * ChangeLog: New file.