URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [rtems-20020807/] [cpukit/] [itron/] [include/] [itronsys/] [sysmgmt.h] - Rev 1765
Compare with Previous | Blame | View Log
/* * COPYRIGHT (c) 1989-1999. * On-Line Applications Research Corporation (OAR). * * The license and distribution terms for this file may be * found in the file LICENSE in this distribution or at * http://www.OARcorp.com/rtems/license.html. * * sysmgmt.h,v 1.2 1999/11/17 16:47:15 jennifer Exp */ #ifndef __ITRON_SYSTEM_MANAGEMENT_h_ #define __ITRON_SYSTEM_MANAGEMENT_h_ #ifdef __cplusplus extern "C" { #endif /* * Get Version (get_ver) Structure */ typedef struct t_ver { UH maker; /* vendor */ UH id; /* format number */ UH spver; /* specification version */ UH prver; /* product version */ UH prno[4]; /* product control information */ UH cpu; /* CPU information */ UH var; /* variation descriptor */ } T_VER; /* * Specific MAKER codes established as of March, 1993 are as follows. * Due to restrictions on the assignment of CPU codes described below, it is * necessary to use maker codes in the range 0x000 through 0x00ff for vendors * developing CPUs. */ /* * CPU defines XXX need to name the constants */ #if 0 #define 0x000 /* No version (test systems, etc.) */ #define 0x001 /* University of Tokyo */ #define 0x009 /* FUJITSU LIMITED */ #define 0x00a /* Hitachi, Ltd. */ #define 0x00b /* Matsushita Electric Industrial Co., Ltd. */ #define 0x00c /* Mitsubishi Electric Corporation */ #define 0x00d /* NEC Corporation */ #define 0x00e /* Oki Electric Industry Co., Ltd. */ #define 0x00f /* TOSHIBA CORPORATION */ #endif /* * The above have been assigned in alphabetical order. */ #if 0 #define 0x010 /* ALPS ELECTRIC CO., LTD. */ #define 0x011 /* WACOM Co., Ltd. */ #define 0x012 /* Personal Media Corporation */ #define 0x101 /* OMRON CORPORATION */ #define 0x102 /* SEIKOSHA CO., LTD. */ #define 0x103 /* SYSTEM ALGO CO., LTD. */ #define 0x104 /* Tokyo Computer Service Co., Ltd. */ #define 0x105 /* YAMAHA CORPORATION */ #define 0x106 /* MORSON JAPAN */ #define 0x107 /* TOSHIBA INFORMATION SYSTEMS (JAPAN) CORP. */ #define 0x108 /* Miyazaki System Planning Office */ #define 0x109 /* Three Ace Computer Corporation */ #endif /* * CPU Codes * * Figure 47 shows the format of cpu code. Some processors use the format * given in Figure 47(1). The format given in Figure 47(2) is used for all * other proprietary processors. * * The code assignment of the CPU1 region in the format given in Figure 47(1) * is common to ITRON and BTRON specifications. The same number is used in * the CPU type of the standard object format of BTRON specification * operating systems implemented on a TRON-specification chip. * * When using the format given in Figure 47(2) the code used for MAKER1 is * assigned by using the lower 8 bits of MAKER described in the previous * subsection. The code assignment of CPU2 is left up to each maker. * * * * +---------------+---------------+---------------+---------------+ * (1) | 0 0 0 0 0 0 0 0 | CPU1 | * +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ * +---------------+---------------+---------------+---------------+ * (2) | MAKER1 | CPU2 | * +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+ * * Figure 47 Format of cpu Returned by get_ver * * * Specific CPU codes established as of March, 1993 are as follows. */ #if 0 /* * XXX CONVERT THESE to #defines */ /* * Contents of the CPU1 field */ #define (0x0) CPU unspecified, no CPU information given #define (0x1) TRONCHIP32 shared #define (0x2) reserved #define (0x3) reserved #define (0x4) reserved #define (0x5) reserved (<<L1R>> TRON-specification chip) #define (0x6) reserved (<<L1>> TRON-specification chip) #define (0x7) reserved (TRON-specification chip supporting the LSID function) /* CPU vendors are unspecified for codes B'00000000 through B'00000111. */ #define (0x8) reserved #define (0x9) GMICRO/100 #define (0xa) GMICRO/200 #define (0xb) GMICRO/300 #define (0xc) reserved #define (0xd) TX1 #define (0xe) TX2 #define (0xf) reserved #define (0x10) reserved #define (0x11) reserved #define (0x12) reserved #define (0x13) O32 #define (0x14) reserved #define (0x15) MN10400 #define (0x16) reserved #define (0x17) reserved #define (0x18) GMICRO/400 #define (0x19) GMICRO/500 #define (0x1a) reserved #define (0x1b-0x3f) reserved * For GMICRO extended, TX series extended, and TRONCHIP64 chips. #define (0x40) Motorola 68000 #define (0x41) Motorola 68010 #define (0x42) Motorola 68020 #define (0x43) Motorola 68030 #define (0x44) Motorola 68040 #define -(0x40-0x4f) #define Motorola 68000 family #define (0x50) National Semiconductor NS32032 #define (0x50-0x5f) National Semiconductor NS32000 family #define (0x60) Intel 8086, 8088 #define (0x61) Intel 80186 #define (0x62) Intel 80286 #define (0x63) Intel 80386 #define (0x64) Intel 80486 #define (0x60-0x6f) Intel iAPX86 family #define (0x70-0x7f) NEC V Series #define (0x80-0xff) reserved #endif /* * Assigning Version Numbers * * The version numbers of ITRON and uITRON specifications take the following * form. * * Ver X.YY.ZZ[.WW] * * where "X" represents major version number of the ITRON specification to * distinguish ITRON1, ITRON2 and uITRON 3.0 specifications. Specific * assignment is as follows. * * "X" = 1 ITRON1 specification * = 2 ITRON2 or uITRON 2.0 specification * = 3 uITRON 3.0 specification * * "YY" is a number used to distinguish versions according to changes and * additions made to the specification. After the specification is published, * this number is incremented in order "YY" = 00, 01, 02... according to * version upgrades. The first digit of "YY" is 'A', 'B' or 'C' for draft * standard versions and test versions within the TRON Association before the * specification have been published. * * The "X.YY" part of the specification version numbers is returned by spver * to get_ver system call. The corresponding hexadecimal value is used when * "YY" includes 'A', 'B' or 'C'. * * "ZZ" represents a number used to distinguish versions related to the written * style of a specification. This number is incremented in order * "ZZ" = 00, 01, 02... when there have been changes in specification * configuration, reordering of chapters or corrections of misprints. * When a further distinction of the written style of specifications is * desired, ".WW" may be added optionally after "ZZ". WW will be assumed * to be zero if ".WW" is omitted. */ /* * Reference System (ref_sys) Structure */ typedef struct t_rsys { INT sysstat; /* system state */ /* additional information may be included depending on the implementation */ } T_RSYS; /* * sysstat */ #define TSS_TSK 0 /* normal state in which dispatching is enabled during task portion execution */ #define TSS_DDSP 1 /* state after dis_dsp has been executed during task portion execution (dispatch disabled) */ #define TSS_LOC 3 /* state after loc_cpu has been executed during task portion execution (interrupt and dispatch disabled) */ #define TSS_INDP 4 /* state during execution of task-independent portions (interrupt and timer handlers) */ /* * Reference Configuration (ref_cfg) Structure */ typedef struct t_rcfg { /* details concerning members are implementation dependent */ } T_RCFG; /* * Define Service (def_svc) Structure */ typedef struct t_dsvc { ATR svcatr; /* extended SVC handler attributes */ FP svchdr; /* extended SVC handler address */ /* additional information may be included depending on the implementation */ } T_DSVC; /* * Define Exception (def_exc) Structure */ typedef struct t_dexc { ATR excatr; /* exception handler attributes */ FP exchdr; /* exception handler address */ /* additional information may be included depending on the implementation */ } T_DEXC; /* * System Management Functions */ /* * get_ver - Get Version Information */ ER get_ver( T_VER *pk_ver ); /* * ref_sys - Reference Semaphore Status */ ER ref_sys( T_RSYS *pk_rsys ); /* * ref_cfg - Reference Configuration Information */ ER ref_cfg( T_RCFG *pk_rcfg ); /* * def_svc - Define Extended SVC Handler */ ER def_svc( FN s_fncd, T_DSVC *pk_dsvc ); /* * def_exc - Define Exception Handler */ ER def_exc( UINT exckind, T_DEXC *pk_dexc ); #ifdef __cplusplus } #endif #endif /* end of include file */