Subversion Repositories or1k

# Makefile.in generated by automake 1.6.2 from Makefile.am.
# @configure_input@

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
# Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
#  COPYRIGHT (c) 1988-2002.
#  On-Line Applications Research Corporation (OAR).
#  All rights reserved.
#
#  Makefile.am,v 1.9 2002/03/28 00:53:30 joel Exp
#
SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = ..

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_DATA = @INSTALL_DATA@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_HEADER = $(INSTALL_DATA)
transform = @program_transform_name@
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :

EXEEXT = @EXEEXT@
OBJEXT = @OBJEXT@
PATH_SEPARATOR = @PATH_SEPARATOR@
AMTAR = @AMTAR@
AWK = @AWK@
BMENU2 = @BMENU2@
DEPDIR = @DEPDIR@
DVIPS = @DVIPS@
ENDIF = @ENDIF@
EPSTOPDF = @EPSTOPDF@
GS = @GS@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LN_S = @LN_S@
MAINT = @MAINT@
MAKE = @MAKE@
PACKAGE = @PACKAGE@
PERL = @PERL@
PROJECT_ROOT = @PROJECT_ROOT@
PROJECT_TOPdir = @PROJECT_TOPdir@
RTEMS_TOPdir = @RTEMS_TOPdir@
STRIP = @STRIP@
TEXI2DVI = @TEXI2DVI@
TEXI2PDF = @TEXI2PDF@
TEXI2WWW = @TEXI2WWW@
VERSION = @VERSION@
am__include = @am__include@
am__quote = @am__quote@
htmldir = @htmldir@
install_sh = @install_sh@
pkgdocdir = @pkgdocdir@

PROJECT = started
EDITION = 1

SUBDIRS = pictures

SUFFIXES = .t .pdf .eps .html

MAINTAINERCLEANFILES = $(PROJECT) $(PROJECT)-[0-9] $(PROJECT)-[0-9][0-9] $(GENERATED_FILES)

MOSTLYCLEANFILES = $(PDF_IMAGES) index.html $(PROJECT)*.html rtems_header.html \
   rtems_footer.html

CLEANFILES = $(PROJECT).pdf

dvidir = $(pkgdocdir)/dvi

psdir = $(pkgdocdir)/ps

pdfdir = $(pkgdocdir)/pdf

@USE_HTML_TRUE@html_project_DATA = index.html $(PROJECT)*.html

@USE_DVI_TRUE@dvi_DATA = $(PROJECT).dvi

@USE_DVI_TRUE@@USE_PS_TRUE@ps_DATA = $(PROJECT).ps

@USE_PDF_TRUE@pdf_DATA = $(PROJECT).pdf
AM_MAKEINFOFLAGS = -I ..

html_projectdir = $(htmldir)/$(PROJECT)

TEXI2WWW_ARGS = \
-I $(srcdir) -I $(top_srcdir) \
-dirfile ../index.html \
-header rtems_header.html \
-footer rtems_footer.html \
-icons ../images


GENERATED_FILES = binaries.texi buildc.texi buildrt.texi intro.texi \
    nt.texi require.texi nextstep.texi sample.texi


COMMON_FILES = $(top_srcdir)/common/setup.texi \
    $(top_srcdir)/common/cpright.texi


FILES = tversions.texi

info_TEXINFOS = started.texi
started_TEXINFOS = $(FILES) $(COMMON_FILES) $(GENERATED_FILES)

EXTRA_DIST = binaries.t buildc.t buildrt.t gdb.t intro.t nextstep.t nt.t \
    require.t sample.t

subdir = started
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_CLEAN_FILES =
CFLAGS = @CFLAGS@
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
        $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
DIST_SOURCES =
TEXINFO_TEX = $(top_srcdir)/../texinfo.tex
INFO_DEPS = started
DVIS = started.dvi
TEXINFOS = started.texi
DATA = $(dvi_DATA) $(html_project_DATA) $(pdf_DATA) $(ps_DATA)


RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \
        uninstall-info-recursive all-recursive install-data-recursive \
        install-exec-recursive installdirs-recursive install-recursive \
        uninstall-recursive check-recursive installcheck-recursive
DIST_COMMON = $(started_TEXINFOS) ChangeLog Makefile.am Makefile.in \
        stamp-vti version.texi
DIST_SUBDIRS = $(SUBDIRS)
all: all-recursive

.SUFFIXES:
.SUFFIXES: .t .pdf .eps .html .dvi .info .ps .texi
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/project.am $(top_srcdir)/main.am $(top_srcdir)/configure.ac $(ACLOCAL_M4)
        cd $(top_srcdir) && \
          $(AUTOMAKE) --foreign  started/Makefile
Makefile: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.in  $(top_builddir)/config.status
        cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)

$(srcdir)/version.texi: @MAINTAINER_MODE_TRUE@ $(srcdir)/stamp-vti
        @:
$(srcdir)/stamp-vti: started.texi $(top_srcdir)/configure.ac
        @(set `$(SHELL) $(top_srcdir)/../mdate-sh $(srcdir)/started.texi`; \
        echo "@set UPDATED $$1 $$2 $$3"; \
        echo "@set UPDATED-MONTH $$2 $$3"; \
        echo "@set EDITION $(VERSION)"; \
        echo "@set VERSION $(VERSION)") > vti.tmp
        @cmp -s vti.tmp $(srcdir)/version.texi \
          || (echo "Updating $(srcdir)/version.texi"; \
              cp vti.tmp $(srcdir)/version.texi)
        -@rm -f vti.tmp
        @cp $(srcdir)/version.texi $@

mostlyclean-vti:
        -rm -f vti.tmp

maintainer-clean-vti:
@MAINTAINER_MODE_TRUE@  -rm -f $(srcdir)/stamp-vti $(srcdir)/version.texi

started: started.texi $(srcdir)/version.texi $(started_TEXINFOS)
started.dvi: started.texi $(srcdir)/version.texi $(started_TEXINFOS)

.texi.info:
        @cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
        cd $(srcdir) \
          && $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) \
               `echo $< | sed 's,.*/,,'`

@USE_DVI_FALSE@.texi.dvi:
@USE_DVI_FALSE@ TEXINPUTS="$(top_srcdir)/..$(PATH_SEPARATOR)$$TEXINPUTS" \
@USE_DVI_FALSE@ MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
@USE_DVI_FALSE@ $(TEXI2DVI) $<

.texi:
        @cd $(srcdir) && rm -f $@ $@-[0-9] $@-[0-9][0-9]
        cd $(srcdir) \
          && $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) \
               `echo $< | sed 's,.*/,,'`

MAKEINFO = @MAKEINFO@
@USE_DVI_FALSE@@USE_PS_TRUE@.dvi.ps:
@USE_DVI_FALSE@@USE_PS_TRUE@    $(DVIPS) $< -o $@
@USE_DVI_TRUE@@USE_PS_FALSE@.dvi.ps:
@USE_DVI_TRUE@@USE_PS_FALSE@    $(DVIPS) $< -o $@
@USE_DVI_FALSE@@USE_PS_FALSE@.dvi.ps:
@USE_DVI_FALSE@@USE_PS_FALSE@   $(DVIPS) $< -o $@

uninstall-info-am:
        $(PRE_UNINSTALL)
        @if (install-info --version && \
             install-info --version | fgrep -i -v debian) >/dev/null 2>&1; then \
          list='$(INFO_DEPS)'; \
          for file in $$list; do \
            echo " install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$file"; \
            install-info --info-dir=$(DESTDIR)$(infodir) --remove $(DESTDIR)$(infodir)/$$file; \
          done; \
        else :; fi
        @$(NORMAL_UNINSTALL)
        @list='$(INFO_DEPS)'; \
        for file in $$list; do \
          (if cd $(DESTDIR)$(infodir); then \
             echo " rm -f $$file $$file-[0-9] $$file-[0-9][0-9])"; \
             rm -f $$file $$file-[0-9] $$file-[0-9][0-9]; \
           else :; fi); \
        done

dist-info: $(INFO_DEPS)
        list='$(INFO_DEPS)'; \
        for base in $$list; do \
          d=$(srcdir); \
          for file in $$d/$$base*; do \
            relfile=`expr "$$file" : "$$d/\(.*\)"`; \
            test -f $(distdir)/$$relfile || \
              cp -p $$file $(distdir)/$$relfile; \
          done; \
        done

mostlyclean-aminfo:
        -rm -f started.aux started.cp started.cps started.dvi started.fn started.fns \
          started.ky started.log started.pg started.ps started.toc \
          started.tp started.vr

maintainer-clean-aminfo:
        cd $(srcdir) && \
        list='$(INFO_DEPS)'; for i in $$list; do \
          rm -f $$i; \
          if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
            rm -f $$i-[0-9]*; \
          fi; \
        done
dviDATA_INSTALL = $(INSTALL_DATA)
install-dviDATA: $(dvi_DATA)
        @$(NORMAL_INSTALL)
        $(mkinstalldirs) $(DESTDIR)$(dvidir)
        @list='$(dvi_DATA)'; for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          f="`echo $$p | sed -e 's|^.*/||'`"; \
          echo " $(dviDATA_INSTALL) $$d$$p $(DESTDIR)$(dvidir)/$$f"; \
          $(dviDATA_INSTALL) $$d$$p $(DESTDIR)$(dvidir)/$$f; \
        done

uninstall-dviDATA:
        @$(NORMAL_UNINSTALL)
        @list='$(dvi_DATA)'; for p in $$list; do \
          f="`echo $$p | sed -e 's|^.*/||'`"; \
          echo " rm -f $(DESTDIR)$(dvidir)/$$f"; \
          rm -f $(DESTDIR)$(dvidir)/$$f; \
        done
html_projectDATA_INSTALL = $(INSTALL_DATA)
install-html_projectDATA: $(html_project_DATA)
        @$(NORMAL_INSTALL)
        $(mkinstalldirs) $(DESTDIR)$(html_projectdir)
        @list='$(html_project_DATA)'; for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          f="`echo $$p | sed -e 's|^.*/||'`"; \
          echo " $(html_projectDATA_INSTALL) $$d$$p $(DESTDIR)$(html_projectdir)/$$f"; \
          $(html_projectDATA_INSTALL) $$d$$p $(DESTDIR)$(html_projectdir)/$$f; \
        done

uninstall-html_projectDATA:
        @$(NORMAL_UNINSTALL)
        @list='$(html_project_DATA)'; for p in $$list; do \
          f="`echo $$p | sed -e 's|^.*/||'`"; \
          echo " rm -f $(DESTDIR)$(html_projectdir)/$$f"; \
          rm -f $(DESTDIR)$(html_projectdir)/$$f; \
        done
pdfDATA_INSTALL = $(INSTALL_DATA)
install-pdfDATA: $(pdf_DATA)
        @$(NORMAL_INSTALL)
        $(mkinstalldirs) $(DESTDIR)$(pdfdir)
        @list='$(pdf_DATA)'; for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          f="`echo $$p | sed -e 's|^.*/||'`"; \
          echo " $(pdfDATA_INSTALL) $$d$$p $(DESTDIR)$(pdfdir)/$$f"; \
          $(pdfDATA_INSTALL) $$d$$p $(DESTDIR)$(pdfdir)/$$f; \
        done

uninstall-pdfDATA:
        @$(NORMAL_UNINSTALL)
        @list='$(pdf_DATA)'; for p in $$list; do \
          f="`echo $$p | sed -e 's|^.*/||'`"; \
          echo " rm -f $(DESTDIR)$(pdfdir)/$$f"; \
          rm -f $(DESTDIR)$(pdfdir)/$$f; \
        done
psDATA_INSTALL = $(INSTALL_DATA)
install-psDATA: $(ps_DATA)
        @$(NORMAL_INSTALL)
        $(mkinstalldirs) $(DESTDIR)$(psdir)
        @list='$(ps_DATA)'; for p in $$list; do \
          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
          f="`echo $$p | sed -e 's|^.*/||'`"; \
          echo " $(psDATA_INSTALL) $$d$$p $(DESTDIR)$(psdir)/$$f"; \
          $(psDATA_INSTALL) $$d$$p $(DESTDIR)$(psdir)/$$f; \
        done

uninstall-psDATA:
        @$(NORMAL_UNINSTALL)
        @list='$(ps_DATA)'; for p in $$list; do \
          f="`echo $$p | sed -e 's|^.*/||'`"; \
          echo " rm -f $(DESTDIR)$(psdir)/$$f"; \
          rm -f $(DESTDIR)$(psdir)/$$f; \
        done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
        @set fnord $$MAKEFLAGS; amf=$$2; \
        dot_seen=no; \
        target=`echo $@ | sed s/-recursive//`; \
        list='$(SUBDIRS)'; for subdir in $$list; do \
          echo "Making $$target in $$subdir"; \
          if test "$$subdir" = "."; then \
            dot_seen=yes; \
            local_target="$$target-am"; \
          else \
            local_target="$$target"; \
          fi; \
          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
        done; \
        if test "$$dot_seen" = "no"; then \
          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
        fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
        @set fnord $$MAKEFLAGS; amf=$$2; \
        dot_seen=no; \
        case "$@" in \
          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
          *) list='$(SUBDIRS)' ;; \
        esac; \
        rev=''; for subdir in $$list; do \
          if test "$$subdir" = "."; then :; else \
            rev="$$subdir $$rev"; \
          fi; \
        done; \
        rev="$$rev ."; \
        target=`echo $@ | sed s/-recursive//`; \
        for subdir in $$rev; do \
          echo "Making $$target in $$subdir"; \
          if test "$$subdir" = "."; then \
            local_target="$$target-am"; \
          else \
            local_target="$$target"; \
          fi; \
          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
        done && test -z "$$fail"
tags-recursive:
        list='$(SUBDIRS)'; for subdir in $$list; do \
          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
        done

ETAGS = etags
ETAGSFLAGS =

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '    { files[$$0] = 1; } \
               END { for (i in files) print i; }'`; \
        mkid -fID $$unique

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
                $(TAGS_FILES) $(LISP)
        tags=; \
        here=`pwd`; \
        list='$(SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
          fi; \
        done; \
        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
        unique=`for i in $$list; do \
            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
          done | \
          $(AWK) '    { files[$$0] = 1; } \
               END { for (i in files) print i; }'`; \
        test -z "$(ETAGS_ARGS)$$tags$$unique" \
          || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
             $$tags $$unique

GTAGS:
        here=`$(am__cd) $(top_builddir) && pwd` \
          && cd $(top_srcdir) \
          && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = ..
distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)

distdir: $(DISTFILES)
        $(mkinstalldirs) $(distdir)/$(top_srcdir)/common
        @list='$(DISTFILES)'; for file in $$list; do \
          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
          dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
          if test "$$dir" != "$$file" && test "$$dir" != "."; then \
            dir="/$$dir"; \
            $(mkinstalldirs) "$(distdir)$$dir"; \
          else \
            dir=''; \
          fi; \
          if test -d $$d/$$file; then \
            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
              cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
            fi; \
            cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
          else \
            test -f $(distdir)/$$file \
            || cp -p $$d/$$file $(distdir)/$$file \
            || exit 1; \
          fi; \
        done
        list='$(SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test -d $(distdir)/$$subdir \
            || mkdir $(distdir)/$$subdir \
            || exit 1; \
            (cd $$subdir && \
              $(MAKE) $(AM_MAKEFLAGS) \
                top_distdir="$(top_distdir)" \
                distdir=../$(distdir)/$$subdir \
                distdir) \
              || exit 1; \
          fi; \
        done
        $(MAKE) $(AM_MAKEFLAGS) \
          top_distdir="${top_distdir}" distdir="$(distdir)" \
          dist-info
check-am: all-am
check: check-recursive
all-am: Makefile $(INFO_DEPS) $(DATA)
installdirs: installdirs-recursive
installdirs-am:
        $(mkinstalldirs) $(DESTDIR)$(infodir) $(DESTDIR)$(dvidir) $(DESTDIR)$(html_projectdir) $(DESTDIR)$(pdfdir) $(DESTDIR)$(psdir)

install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
          INSTALL_STRIP_FLAG=-s \
          `test -z '$(STRIP)' || \
            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
        -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:
        -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
        -rm -f Makefile $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
        @echo "This command is intended for maintainers to use"
        @echo "it deletes files that may require special tools to rebuild."
        -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive

clean-am: clean-generic mostlyclean-am

distclean: distclean-recursive

distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am: $(DVIS)

info: info-recursive

info-am: $(INFO_DEPS)

install-data-am: install-dviDATA install-html_projectDATA \
        install-info-am install-pdfDATA install-psDATA

install-exec-am:

install-info: install-info-recursive

install-info-am: $(INFO_DEPS)
        @$(NORMAL_INSTALL)
        $(mkinstalldirs) $(DESTDIR)$(infodir)
        @list='$(INFO_DEPS)'; \
        for file in $$list; do \
          d=$(srcdir); \
          for ifile in echo $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9]; do \
            if test -f $$ifile; then \
              relfile=`expr "$$ifile" : "$$d/\(.*\)"`; \
              echo " $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile"; \
              $(INSTALL_DATA) $$ifile $(DESTDIR)$(infodir)/$$relfile; \
            else : ; fi; \
          done; \
        done
        @$(POST_INSTALL)
        @if (install-info --version && \
             install-info --version | fgrep -i -v debian) >/dev/null 2>&1; then \
          list='$(INFO_DEPS)'; \
          for file in $$list; do \
            echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
            install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
          done; \
        else : ; fi
install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive

maintainer-clean-am: distclean-am maintainer-clean-aminfo \
        maintainer-clean-generic maintainer-clean-vti

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic mostlyclean-vti

uninstall-am: uninstall-dviDATA uninstall-html_projectDATA \
        uninstall-info-am uninstall-pdfDATA uninstall-psDATA

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \
        clean-generic clean-recursive dist-info distclean \
        distclean-generic distclean-recursive distclean-tags distdir \
        dvi dvi-am dvi-recursive info info-am info-recursive install \
        install-am install-data install-data-am install-data-recursive \
        install-dviDATA install-exec install-exec-am \
        install-exec-recursive install-html_projectDATA install-info \
        install-info-am install-info-recursive install-man \
        install-pdfDATA install-psDATA install-recursive install-strip \
        installcheck installcheck-am installdirs installdirs-am \
        installdirs-recursive maintainer-clean maintainer-clean-aminfo \
        maintainer-clean-generic maintainer-clean-recursive \
        maintainer-clean-vti mostlyclean mostlyclean-aminfo \
        mostlyclean-generic mostlyclean-recursive mostlyclean-vti tags \
        tags-recursive uninstall uninstall-am uninstall-dviDATA \
        uninstall-html_projectDATA uninstall-info-am \
        uninstall-info-recursive uninstall-pdfDATA uninstall-psDATA \
        uninstall-recursive


@EPSTOPDF_TRUE@.eps.pdf:
@EPSTOPDF_TRUE@ $(EPSTOPDF) $< --outfile=$@

$(PROJECT).pdf: $(PROJECT).texi $($(PROJECT)_TEXINFOS) $(PDF_IMAGES)

rtems_header.html: $(top_srcdir)/rtems_header.html.in version.texi
        @sed -e s%\.\./images/%$(top_builddir)/images/%g \
        -e s%\@VERSION\@%@VERSION@%g \
        < $< > $@
rtems_footer.html: $(top_srcdir)/rtems_footer.html.in version.texi
        @sed -e s%\.\./images/%$(top_builddir)/%g \
        -e s%\@VERSION\@%@VERSION@%g \
        < $< > $@

index.html $(PROJECT)*.html: $(PROJECT).texi \
    rtems_header.html rtems_footer.html
        $(TEXI2WWW) $(TEXI2WWW_ARGS) -base $(PROJECT) $<

@USE_DVI_TRUE@.texi.dvi:
@USE_DVI_TRUE@  $(TEXI2DVI) -q -I $(srcdir) -I $(top_srcdir) $<
@USE_DVI_TRUE@@USE_PS_TRUE@.dvi.ps:
@USE_DVI_TRUE@@USE_PS_TRUE@     TEXINPUTS="$(srcdir)$(PATH_SEPARATOR)$$TEXINPUTS" \
@USE_DVI_TRUE@@USE_PS_TRUE@     $(DVIPS) $< -o $@

@TEXI2PDF_TRUE@@USE_PDF_TRUE@.texi.pdf:
@TEXI2PDF_TRUE@@USE_PDF_TRUE@   rm -f *.aux *.cp *.fn *.ky *.pg *.tp *.toc *.vr
@TEXI2PDF_TRUE@@USE_PDF_TRUE@   $(TEXI2PDF) -q -I $(srcdir) -I $(top_srcdir) $<

$(srcdir)/intro.texi: intro.t tversions.texi
        $(BMENU2) -c -p "Top" \
            -u "Top" \
            -n "Requirements" < $< > $@

$(srcdir)/require.texi: require.t tversions.texi
        $(BMENU2) -c -p "GCC Mailing Lists" \
            -u "Top" \
            -n "Prebuilt Toolset Executables" < $< > $@

$(srcdir)/binaries.texi: binaries.t tversions.texi
        $(BMENU2) -c -p "Archive and Build Directory Format" \
            -u "Top" \
            -n "Building the GNU C/C++ Cross Compiler Toolset" < $< > $@

$(srcdir)/buildc.texi: buildc.t tversions.texi
        $(BMENU2) -c -p "Removing Zipped Tar Files" \
            -u "Top" \
            -n "Building RTEMS" < $< > $@

$(srcdir)/buildrt.texi: buildrt.t tversions.texi
        $(BMENU2) -c -p "Error Messages Indicating Configuration Problems" \
            -u "Top" \
            -n "Building the Sample Application" < $< > $@

$(srcdir)/sample.texi: sample.t tversions.texi
        $(BMENU2) -c -p "Using the bit_rtems Script" \
            -u "Top" \
            -n "Where To Go From Here" < $< > $@

$(srcdir)/nextstep.texi: nextstep.t tversions.texi
        $(BMENU2) -c -p "More Information on RTEMS Application Makefiles" \
            -u "Top" \
            -n "Using MS-Windows as a Development Host" < $< > $@

$(srcdir)/nt.texi: nt.t tversions.texi
        $(BMENU2) -c -p "Writing an Application" \
            -u "Top" \
            -n "" < $< > $@
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: