Subversion Repositories or1k

#include <ansidecl.h>
#include <stddef.h>
#if 0
#include <errno.h>
#endif
 
/* This is a list of all known signal numbers.  */
 
CONST char *CONST sys_errlist[] = {
	"Success",				/* 0 */
	"Operation not permitted", 		/* EPERM */
	"No such file or directory", 		/* ENOENT */
	"No such process", 			/* ESRCH */
	"Interrupted system call", 		/* EINTR */
	"I/O error", 				/* EIO */
	"No such device or address", 		/* ENXIO */
	"Arg list too long", 			/* E2BIG */
	"Exec format error", 			/* ENOEXEC */
	"Bad file number", 			/* EBADF */
	"No child processes", 			/* ECHILD */
	"Try again", 				/* EAGAIN */
	"Out of memory", 			/* ENOMEM */
	"Permission denied", 			/* EACCES */
	"Bad address", 				/* EFAULT */
	"Block device required", 		/* ENOTBLK */
	"Device or resource busy", 		/* EBUSY */
	"File exists", 				/* EEXIST */
	"Cross-device link", 			/* EXDEV */
	"No such device", 			/* ENODEV */
	"Not a directory", 			/* ENOTDIR */
	"Is a directory", 			/* EISDIR */
	"Invalid argument", 			/* EINVAL */
	"File table overflow", 			/* ENFILE */
	"Too many open files", 			/* EMFILE */
	"Not a typewriter", 			/* ENOTTY */
	"Text file busy", 			/* ETXTBSY */
	"File too large", 			/* EFBIG */
	"No space left on device", 		/* ENOSPC */
	"Illegal seek", 			/* ESPIPE */
	"Read-only file system", 		/* EROFS */
	"Too many links", 			/* EMLINK */
	"Broken pipe", 				/* EPIPE */
	"Math argument out of domain of func", 	/* EDOM */
	"Math result not representable", 	/* ERANGE */
	"Resource deadlock would occur", 	/* EDEADLK */
	"File name too long", 			/* ENAMETOOLONG */
	"No record locks available", 		/* ENOLCK */
	"Function not implemented", 		/* ENOSYS */
	"Directory not empty", 			/* ENOTEMPTY */
	"Too many symbolic links encountered", 	/* ELOOP */
	"Operation would block", 		/* EWOULDBLOCK */
	"No message of desired type", 		/* ENOMSG */
	"Identifier removed", 			/* EIDRM */
	"Channel number out of range", 		/* ECHRNG */
	"Level 2 not synchronized", 		/* EL2NSYNC */
	"Level 3 halted", 			/* EL3HLT */
	"Level 3 reset", 			/* EL3RST */
	"Link number out of range", 		/* ELNRNG */
	"Protocol driver not attached", 	/* EUNATCH */
	"No CSI structure available", 		/* ENOCSI */
	"Level 2 halted", 			/* EL2HLT */
	"Invalid exchange", 			/* EBADE */
	"Invalid request descriptor", 		/* EBADR */
	"Exchange full", 			/* EXFULL */
	"No anode", 				/* ENOANO */
	"Invalid request code", 		/* EBADRQC */
	"Invalid slot", 			/* EBADSLT */
	"File locking deadlock error", 		/* EDEADLOCK */
	"Bad font file format", 		/* EBFONT */
	"Device not a stream", 			/* ENOSTR */
	"No data available", 			/* ENODATA */
	"Timer expired", 			/* ETIME */
	"Out of streams resources", 		/* ENOSR */
	"Machine is not on the network", 	/* ENONET */
	"Package not installed", 		/* ENOPKG */
	"Object is remote", 			/* EREMOTE */
	"Link has been severed", 		/* ENOLINK */
	"Advertise error", 			/* EADV */
	"Srmount error", 			/* ESRMNT */
	"Communication error on send", 		/* ECOMM */
	"Protocol error", 			/* EPROTO */
	"Multihop attempted", 			/* EMULTIHOP */
	"RFS specific error", 			/* EDOTDOT */
	"Not a data message", 			/* EBADMSG */
	"Value too large for defined data type", 	/* EOVERFLOW */
	"Name not unique on network", 		/* ENOTUNIQ */
	"File descriptor in bad state", 	/* EBADFD */
	"Remote address changed", 		/* EREMCHG */
	"Can not access a needed shared library", 	/* ELIBACC */
	"Accessing a corrupted shared library", 	/* ELIBBAD */
	".lib section in a.out corrupted", 	/* ELIBSCN */
	"Attempting to link in too many shared libraries", 	/* ELIBMAX */
	"Cannot exec a shared library directly", 	/* ELIBEXEC */
	"Illegal byte sequence", 		/* EILSEQ */
	"Interrupted system call should be restarted", 	/* ERESTART */
	"Streams pipe error", 			/* ESTRPIPE */
	"Too many users", 			/* EUSERS */
	"Socket operation on non-socket", 	/* ENOTSOCK */
	"Destination address required", 	/* EDESTADDRREQ */
	"Message too long", 			/* EMSGSIZE */
	"Protocol wrong type for socket", 	/* EPROTOTYPE */
	"Protocol not available", 		/* ENOPROTOOPT */
	"Protocol not supported", 		/* EPROTONOSUPPORT */
	"Socket type not supported", 		/* ESOCKTNOSUPPORT */
	"Operation not supported on transport endpoint", 	/* EOPNOTSUPP */
	"Protocol family not supported", 	/* EPFNOSUPPORT */
	"Address family not supported by protocol", 	/* EAFNOSUPPORT */
	"Address already in use", 		/* EADDRINUSE */
	"Cannot assign requested address", 	/* EADDRNOTAVAIL */
	"Network is down", 			/* ENETDOWN */
	"Network is unreachable", 		/* ENETUNREACH */
	"Network dropped connection because of reset", 	/* ENETRESET */
	"Software caused connection abort", 	/* ECONNABORTED */
	"Connection reset by peer", 		/* ECONNRESET */
	"No buffer space available", 		/* ENOBUFS */
	"Transport endpoint is already connected", 	/* EISCONN */
	"Transport endpoint is not connected", 	/* ENOTCONN */
	"Cannot send after transport endpoint shutdown", 	/* ESHUTDOWN */
	"Too many references: cannot splice", 	/* ETOOMANYREFS */
	"Connection timed out", 		/* ETIMEDOUT */
	"Connection refused", 			/* ECONNREFUSED */
	"Host is down", 			/* EHOSTDOWN */
	"No route to host", 			/* EHOSTUNREACH */
	"Operation already in progress", 	/* EALREADY */
	"Operation now in progress", 		/* EINPROGRESS */
	"Stale NFS file handle", 		/* ESTALE */
	"Structure needs cleaning", 		/* EUCLEAN */
	"Not a XENIX named type file", 		/* ENOTNAM */
	"No XENIX semaphores available", 	/* ENAVAIL */
	"Is a named type file", 		/* EISNAM */
	"Remote I/O error", 			/* EREMOTEIO */
	"Quota exceeded", 			/* EDQUOT */
	"No medium found",			/* ENOMEDIUM */
	"Wrong medium type",			/* EMEDIUMTYPE */
	NULL
};
 
 
#define NR_ERRORS ((sizeof (sys_errlist))/(sizeof(char *))-1)
 
CONST int sys_nerr = NR_ERRORS;