Subversion Repositories or1k

/*
 * linux/arch/arm/drivers/scsi/eesox.c
 *
 * Copyright (C) 1997-1998 Russell King
 *
 * This driver is based on experimentation.  Hence, it may have made
 * assumptions about the particular card that I have available, and
 * may not be reliable!
 *
 * Changelog:
 *  01-10-1997	RMK	Created, READONLY version
 *  15-02-1998	RMK	READ/WRITE version
 *			added DMA support and hardware definitions
 *  14-03-1998	RMK	Updated DMA support
 *			Added terminator control
 *  15-04-1998	RMK	Only do PIO if FAS216 will allow it.
 */
 
#include <linux/module.h>
#include <linux/blk.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
#include <linux/unistd.h>
#include <linux/stat.h>
 
#include <asm/delay.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/dma.h>
#include <asm/ecard.h>
#include <asm/pgtable.h>
 
#include "sd.h"
#include "hosts.h"
#include "eesox.h"
 
#define NO_IRQ	255
#define NO_DMA	255
 
/* Configuration */
#define EESOX_XTALFREQ		40
#define EESOX_ASYNC_PERIOD	200
#define EESOX_SYNC_DEPTH	7
 
/*
 * List of devices that the driver will recognise
 */
#define EESOXSCSI_LIST	{ MANU_EESOX, PROD_EESOX_SCSI2 }
 
#define EESOX_FAS216_OFFSET	0xc00
#define EESOX_FAS216_SHIFT	3
 
#define EESOX_STATUS		0xa00
#define EESOX_STAT_INTR		0x01
#define EESOX_STAT_DMA		0x02
 
#define EESOX_CONTROL		0xa00
#define EESOX_INTR_ENABLE	0x04
#define EESOX_TERM_ENABLE	0x02
#define EESOX_RESET		0x01
 
#define EESOX_DMA_OFFSET	0xe00
 
/*
 * Version
 */
#define VER_MAJOR	0
#define VER_MINOR	0
#define VER_PATCH	2
 
static struct expansion_card *ecs[MAX_ECARDS];
 
/*
 * Use term=0,1,0,0,0 to turn terminators on/off
 */
int term[MAX_ECARDS] = { 1, 1, 1, 1, 1, 1, 1, 1 };
 
static struct proc_dir_entry proc_scsi_eesox = {
	PROC_SCSI_QLOGICISP, 5, "eesox",
	S_IFDIR | S_IRUGO | S_IXUGO, 2
};
 
/* Prototype: void eesoxscsi_irqenable(ec, irqnr)
 * Purpose  : Enable interrupts on EESOX SCSI card
 * Params   : ec    - expansion card structure
 *          : irqnr - interrupt number
 */
static void
eesoxscsi_irqenable(struct expansion_card *ec, int irqnr)
{
	struct control *control = (struct control *)ec->irq_data;
 
	control->control |= EESOX_INTR_ENABLE;
 
	outb(control->control, control->io_port);
}
 
/* Prototype: void eesoxscsi_irqdisable(ec, irqnr)
 * Purpose  : Disable interrupts on EESOX SCSI card
 * Params   : ec    - expansion card structure
 *          : irqnr - interrupt number
 */
static void
eesoxscsi_irqdisable(struct expansion_card *ec, int irqnr)
{
	struct control *control = (struct control *)ec->irq_data;
 
	control->control &= ~EESOX_INTR_ENABLE;
 
	outb(control->control, control->io_port);
}
 
static const expansioncard_ops_t eesoxscsi_ops = {
	eesoxscsi_irqenable,
	eesoxscsi_irqdisable,
	NULL,
	NULL,
	NULL,
	NULL
};
 
/* Prototype: void eesoxscsi_terminator_ctl(*host, on_off)
 * Purpose  : Turn the EESOX SCSI terminators on or off
 * Params   : host   - card to turn on/off
 *          : on_off - !0 to turn on, 0 to turn off
 */
static void
eesoxscsi_terminator_ctl(struct Scsi_Host *host, int on_off)
{
	EESOXScsi_Info *info = (EESOXScsi_Info *)host->hostdata;
	unsigned long flags;
 
	save_flags_cli(flags);
	if (on_off)
		info->control.control |= EESOX_TERM_ENABLE;
	else
		info->control.control &= ~EESOX_TERM_ENABLE;
	restore_flags(flags);
 
	outb(info->control.control, info->control.io_port);
}
 
/* Prototype: void eesoxscsi_intr(irq, *dev_id, *regs)
 * Purpose  : handle interrupts from EESOX SCSI card
 * Params   : irq    - interrupt number
 *	      dev_id - user-defined (Scsi_Host structure)
 *	      regs   - processor registers at interrupt
 */
static void
eesoxscsi_intr(int irq, void *dev_id, struct pt_regs *regs)
{
	struct Scsi_Host *host = (struct Scsi_Host *)dev_id;
 
	fas216_intr(host);
}
 
static void
eesoxscsi_invalidate(char *addr, long len, fasdmadir_t direction)
{
	unsigned int page;
 
	if (direction == DMA_OUT) {
		for(page = (unsigned int) addr; len > 0;
		     page += PAGE_SIZE, len -= PAGE_SIZE)
			flush_page_to_ram(page);
	} else
		flush_cache_range(current->mm, (unsigned long)addr,
				  (unsigned long)addr + len);
}
 
/* Prototype: fasdmatype_t eesoxscsi_dma_setup(host, SCpnt, direction, min_type)
 * Purpose  : initialises DMA/PIO
 * Params   : host      - host
 *	      SCpnt     - command
 *	      direction - DMA on to/off of card
 *	      min_type  - minimum DMA support that we must have for this transfer
 * Returns  : type of transfer to be performed
 */
static fasdmatype_t
eesoxscsi_dma_setup(struct Scsi_Host *host, Scsi_Pointer *SCp,
		       fasdmadir_t direction, fasdmatype_t min_type)
{
	EESOXScsi_Info *info = (EESOXScsi_Info *)host->hostdata;
	int dmach = host->dma_channel;
 
	if (dmach != NO_DMA &&
	    (min_type == fasdma_real_all || SCp->this_residual >= 512)) {
		int buf;
 
		for(buf = 1; buf <= SCp->buffers_residual &&
			     buf < NR_SG; buf++) {
			info->dmasg[buf].address = __virt_to_bus(
				(unsigned long)SCp->buffer[buf].address);
			info->dmasg[buf].length = SCp->buffer[buf].length;
 
			eesoxscsi_invalidate(SCp->buffer[buf].address,
						SCp->buffer[buf].length,
						direction);
		}
 
		info->dmasg[0].address = __virt_to_phys((unsigned long)SCp->ptr);
		info->dmasg[0].length = SCp->this_residual;
		eesoxscsi_invalidate(SCp->ptr,
					SCp->this_residual, direction);
 
		disable_dma(dmach);
		set_dma_sg(dmach, info->dmasg, buf);
		set_dma_mode(dmach,
			     direction == DMA_OUT ? DMA_MODE_WRITE :
						    DMA_MODE_READ);
		enable_dma(dmach);
		return fasdma_real_all;
	}
	/*
	 * We don't do DMA, we only do slow PIO
	 *
	 * Some day, we will do Pseudo DMA
	 */
	return fasdma_pseudo;
}
 
static void
eesoxscsi_dma_pseudo(struct Scsi_Host *host, Scsi_Pointer *SCp,
		     fasdmadir_t dir, int transfer_size)
{
	EESOXScsi_Info *info = (EESOXScsi_Info *)host->hostdata;
	unsigned int status;
	unsigned int length = SCp->this_residual;
	union {
		unsigned char *c;
		unsigned short *s;
		unsigned long *l;
	} buffer;
 
	buffer.c = SCp->ptr;
 
	status = inb(host->io_port + EESOX_STATUS);
	if (dir == DMA_IN) {
		while (length > 8) {
			if (status & EESOX_STAT_DMA) {
				unsigned long l1, l2;
 
				l1 = inw(info->dmaarea);
				l1 |= inw(info->dmaarea) << 16;
				l2 = inw(info->dmaarea);
				l2 |= inw(info->dmaarea) << 16;
				*buffer.l++ = l1;
				*buffer.l++ = l2;
				length -= 8;
			} else if (status & EESOX_STAT_INTR)
				goto end;
			status = inb(host->io_port + EESOX_STATUS);
		}
 
		while (length > 1) {
			if (status & EESOX_STAT_DMA) {
				*buffer.s++ = inw(info->dmaarea);
				length -= 2;
			} else if (status & EESOX_STAT_INTR)
				goto end;
			status = inb(host->io_port + EESOX_STATUS);
		}
 
		while (length > 0) {
			if (status & EESOX_STAT_DMA) {
				*buffer.c++ = inw(info->dmaarea);
				length -= 1;
			} else if (status & EESOX_STAT_INTR)
				goto end;
			status = inb(host->io_port + EESOX_STATUS);
		}
	} else {
		while (length > 8) {
			if (status & EESOX_STAT_DMA) {
				unsigned long l1, l2;
 
				l1 = *buffer.l++;
				l2 = *buffer.l++;
 
				outw(l1, info->dmaarea);
				outw(l1 >> 16, info->dmaarea);
				outw(l2, info->dmaarea);
				outw(l2 >> 16, info->dmaarea);
				length -= 8;
			} else if (status & EESOX_STAT_INTR)
				goto end;
			status = inb(host->io_port + EESOX_STATUS);
		}
 
		while (length > 1) {
			if (status & EESOX_STAT_DMA) {
				outw(*buffer.s++, info->dmaarea);
				length -= 2;
			} else if (status & EESOX_STAT_INTR)
				goto end;
			status = inb(host->io_port + EESOX_STATUS);
		}
 
		while (length > 0) {
			if (status & EESOX_STAT_DMA) {
				outw(*buffer.c++, info->dmaarea);
				length -= 1;
			} else if (status & EESOX_STAT_INTR)
				goto end;
			status = inb(host->io_port + EESOX_STATUS);
		}
	}
end:
}
 
/* Prototype: int eesoxscsi_dma_stop(host, SCpnt)
 * Purpose  : stops DMA/PIO
 * Params   : host  - host
 *	      SCpnt - command
 */
static void
eesoxscsi_dma_stop(struct Scsi_Host *host, Scsi_Pointer *SCp)
{
	if (host->dma_channel != NO_DMA)
		disable_dma(host->dma_channel);
}
 
/* Prototype: int eesoxscsi_detect(Scsi_Host_Template * tpnt)
 * Purpose  : initialises EESOX SCSI driver
 * Params   : tpnt - template for this SCSI adapter
 * Returns  : >0 if host found, 0 otherwise.
 */
int
eesoxscsi_detect(Scsi_Host_Template *tpnt)
{
	static const card_ids eesoxscsi_cids[] =
			{ EESOXSCSI_LIST, { 0xffff, 0xffff} };
	int count = 0;
	struct Scsi_Host *host;
 
	tpnt->proc_dir = &proc_scsi_eesox;
	memset(ecs, 0, sizeof (ecs));
 
	ecard_startfind();
 
	while(1) {
	    	EESOXScsi_Info *info;
 
		ecs[count] = ecard_find(0, eesoxscsi_cids);
		if (!ecs[count])
			break;
 
		ecard_claim(ecs[count]);
 
		host = scsi_register(tpnt, sizeof (EESOXScsi_Info));
		if (!host) {
			ecard_release(ecs[count]);
			break;
		}
 
		host->io_port = ecard_address(ecs[count], ECARD_IOC, ECARD_FAST);
		host->irq = ecs[count]->irq;
		host->dma_channel = ecs[count]->dma;
		info = (EESOXScsi_Info *)host->hostdata;
 
		info->control.io_port = host->io_port + EESOX_CONTROL;
		info->control.control = term[count] ? EESOX_TERM_ENABLE : 0;
		outb(info->control.control, info->control.io_port);
 
		ecs[count]->irqaddr = (unsigned char *)
			    ioaddr(host->io_port + EESOX_STATUS);
		ecs[count]->irqmask = EESOX_STAT_INTR;
		ecs[count]->irq_data = &info->control;
		ecs[count]->ops = (expansioncard_ops_t *)&eesoxscsi_ops;
 
		info->info.scsi.io_port		= host->io_port + EESOX_FAS216_OFFSET;
		info->info.scsi.io_shift	= EESOX_FAS216_SHIFT;
		info->info.scsi.irq		= host->irq;
		info->info.ifcfg.clockrate	= EESOX_XTALFREQ;
		info->info.ifcfg.select_timeout	= 255;
		info->info.ifcfg.asyncperiod	= EESOX_ASYNC_PERIOD;
		info->info.ifcfg.sync_max_depth	= EESOX_SYNC_DEPTH;
		info->info.ifcfg.cntl3		= CNTL3_BS8 | CNTL3_FASTSCSI | CNTL3_FASTCLK;
		info->info.ifcfg.disconnect_ok	= 1;
		info->info.ifcfg.wide_max_size	= 0;
		info->info.dma.setup		= eesoxscsi_dma_setup;
		info->info.dma.pseudo		= eesoxscsi_dma_pseudo;
		info->info.dma.stop		= eesoxscsi_dma_stop;
		info->dmaarea			= host->io_port + EESOX_DMA_OFFSET;
 
		request_region(host->io_port + EESOX_FAS216_OFFSET,
				16 << EESOX_FAS216_SHIFT, "eesox2-fas");
 
		if (request_irq(host->irq, eesoxscsi_intr,
				SA_INTERRUPT, "eesox", host)) {
			printk("scsi%d: IRQ%d not free, interrupts disabled\n",
			       host->host_no, host->irq);
			host->irq = NO_IRQ;
		}
 
		if (request_dma(host->dma_channel, "eesox")) {
			printk("scsi%d: DMA%d not free, DMA disabled\n",
			       host->host_no, host->dma_channel);
			host->dma_channel = NO_DMA;
		}
 
		fas216_init(host);
		++count;
	}
	return count;
}
 
/* Prototype: int eesoxscsi_release(struct Scsi_Host * host)
 * Purpose  : releases all resources used by this adapter
 * Params   : host - driver host structure to return info for.
 */
int eesoxscsi_release(struct Scsi_Host *host)
{
	int i;
 
	fas216_release(host);
 
	if (host->irq != NO_IRQ)
		free_irq(host->irq, host);
	if (host->dma_channel != NO_DMA)
		free_dma(host->dma_channel);
	release_region(host->io_port + EESOX_FAS216_OFFSET, 16 << EESOX_FAS216_SHIFT);
 
	for (i = 0; i < MAX_ECARDS; i++)
		if (ecs[i] &&
		    host->io_port == ecard_address(ecs[i], ECARD_IOC, ECARD_FAST))
			ecard_release(ecs[i]);
	return 0;
}
 
/* Prototype: const char *eesoxscsi_info(struct Scsi_Host * host)
 * Purpose  : returns a descriptive string about this interface,
 * Params   : host - driver host structure to return info for.
 * Returns  : pointer to a static buffer containing null terminated string.
 */
const char *eesoxscsi_info(struct Scsi_Host *host)
{
	EESOXScsi_Info *info = (EESOXScsi_Info *)host->hostdata;
	static char string[100], *p;
 
	p = string;
	p += sprintf(string, "%s at port %X ", host->hostt->name, host->io_port);
 
	if (host->irq != NO_IRQ)
		p += sprintf(p, "irq %d ", host->irq);
	else
		p += sprintf(p, "NO IRQ ");
 
	if (host->dma_channel != NO_DMA)
		p += sprintf(p, "dma %d ", host->dma_channel);
	else
		p += sprintf(p, "NO DMA ");
 
	p += sprintf(p, "v%d.%d.%d scsi %s", VER_MAJOR, VER_MINOR, VER_PATCH,
		  info->info.scsi.type);
 
	p += sprintf(p, " terminators %s",
		  info->control.control & EESOX_TERM_ENABLE ? "on" : "off");
 
	return string;
}
 
/* Prototype: int eesoxscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
 * Purpose  : Set a driver specific function
 * Params   : host   - host to setup
 *          : buffer - buffer containing string describing operation
 *          : length - length of string
 * Returns  : -EINVAL, or 0
 */
static int
eesoxscsi_set_proc_info(struct Scsi_Host *host, char *buffer, int length)
{
	int ret = length;
 
	if (length >= 9 && strncmp(buffer, "EESOXSCSI", 9) == 0) {
		buffer += 9;
		length -= 9;
 
		if (length >= 5 && strncmp(buffer, "term=", 5) == 0) {
			if (buffer[5] == '1')
				eesoxscsi_terminator_ctl(host, 1);
			else if (buffer[5] == '0')
				eesoxscsi_terminator_ctl(host, 0);
			else
				ret = -EINVAL;
		} else
			ret = -EINVAL;
	} else
		ret = -EINVAL;
 
	return ret;
}
 
/* Prototype: int eesoxscsi_proc_info(char *buffer, char **start, off_t offset,
 *				      int length, int host_no, int inout)
 * Purpose  : Return information about the driver to a user process accessing
 *	      the /proc filesystem.
 * Params   : buffer - a buffer to write information to
 *	      start  - a pointer into this buffer set by this routine to the start
 *		       of the required information.
 *	      offset - offset into information that we have read upto.
 *	      length - length of buffer
 *	      host_no - host number to return information for
 *	      inout  - 0 for reading, 1 for writing.
 * Returns  : length of data written to buffer.
 */
int eesoxscsi_proc_info(char *buffer, char **start, off_t offset,
			    int length, int host_no, int inout)
{
	int pos, begin, first;
	struct Scsi_Host *host = scsi_hostlist;
	EESOXScsi_Info *info;
	Scsi_Device *scd;
 
	while (host) {
		if (host->host_no == host_no)
			break;
		host = host->next;
	}
	if (!host)
		return 0;
 
	if (inout == 1)
		return eesoxscsi_set_proc_info(host, buffer, length);
 
	info = (EESOXScsi_Info *)host->hostdata;
 
	begin = 0;
	pos = sprintf(buffer,
			"EESOX SCSI driver version %d.%d.%d\n",
			VER_MAJOR, VER_MINOR, VER_PATCH);
	pos += sprintf(buffer + pos,
			"Address: %08X    IRQ : %d     DMA : %d\n"
			"FAS    : %-10s  TERM: %-3s\n\n"
			"Statistics:\n",
			host->io_port, host->irq, host->dma_channel,
			info->info.scsi.type, info->control.control & EESOX_TERM_ENABLE ? "on" : "off");
 
	pos += sprintf(buffer+pos,
			"Queued commands: %-10u   Issued commands: %-10u\n"
			"Done commands  : %-10u   Reads          : %-10u\n"
			"Writes         : %-10u   Others         : %-10u\n"
			"Disconnects    : %-10u   Aborts         : %-10u\n"
			"Resets         : %-10u\n",
			info->info.stats.queues,      info->info.stats.removes,
			info->info.stats.fins,        info->info.stats.reads,
			info->info.stats.writes,      info->info.stats.miscs,
			info->info.stats.disconnects, info->info.stats.aborts,
			info->info.stats.resets);
 
	first = 1;
	for (scd = scsi_devices; scd; scd = scd->next) {
		if (scd->host == host) {
			int len;
 
			if (first) {
				pos += sprintf(buffer+pos,
					       "\nAttached devices:\n");
				first = 0;
			}
 
			proc_print_scsidevice(scd, buffer, &len, pos);
			pos += len;
			pos += sprintf(buffer+pos, "Extensions: ");
			if (scd->tagged_supported)
				pos += sprintf(buffer+pos, "TAG %sabled [%d] ",
					      scd->tagged_queue ? "en" : "dis",
					      scd->current_tag);
			pos += sprintf(buffer+pos, "\n");
 
			if (pos + begin < offset) {
				begin += pos;
				pos = 0;
			}
			if (pos + begin > offset + length)
				break;
		}
	}
 
	*start = buffer + (offset - begin);
	pos -= offset - begin;
	if (pos > length)
		pos = length;
 
	return pos;
}
 
#ifdef MODULE
Scsi_Host_Template driver_template = EESOXSCSI;
 
#include "scsi_module.c"
#endif