OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [uclinux/] [uClinux-2.0.x/] [arch/] [armnommu/] [lib/] [backtrace.S] - Rev 199

Go to most recent revision | Compare with Previous | Blame | View Log

/*
 * linux/arch/arm/lib/backtrace.S
 *
 * Copyright (C) 1995, 1996 Russell King
 */

#include <asm/assembler.h>
                .text

@ fp is 0 or stack frame

#define frame   r4
#define next    r5
#define save    r6
#define mask    r7
#define offset  r8

                .global ___backtrace,__backtrace
__backtrace:
___backtrace:
#ifdef __arm6__
                mrs     r1, cpsr
#else
                mov     r1, pc
                and     r1, r1, #0xfc000003
#endif
                mov     r0, fp

                .global _c_backtrace,c_backtrace
c_backtrace:
_c_backtrace:   stmfd   sp!, {r4 - r8, lr}      @ Save an extra register so we have a location...
                tst     r1, #0x10               @ 26 or 32-bit?
                moveq   mask, #0xfc000003
                movne   mask, #0
                tst     mask, r0
                movne   r0, #0
                movs    frame, r0
Lbadbacktrace:  moveq   r0, #-2
                LOADREGS(eqfd, sp!, {r4 - r8, pc})

Lst:            stmfd   sp!, {pc}                       @ calculate offset of PC in STMIA instruction
                ldr     r0, [sp], #4
                adr     r1, Lst - 4
                sub     offset, r0, r1

Lloop:          tst     frame, mask                     @ Check for address exceptions...
                bne     Lbadbacktrace

                ldmda   frame, {r0, r1, r2, r3}         @ fp, sp, lr, pc
                mov     next, r0

                sub     save, r3, offset                @ Correct PC for prefetching
                bic     save, save, mask
                adr     r0, Lfe
                mov     r1, save
                bic     r2, r2, mask
                bl      printk

                sub     r0, frame, #16
                ldr     r1, [save, #4]
                mov     r3, r1, lsr #10
                ldr     r2, Ldsi+4
                teq     r3, r2                  @ Check for stmia sp!, {args}
                addeq   save, save, #4          @ next instruction
                bleq    Ldumpstm

                ldr     r1, [save, #4]          @ Get 'stmia sp!, {rlist, fp, ip, lr, pc}' instruction
                mov     r3, r1, lsr #10
                ldr     r2, Ldsi
                teq     r3, r2
                bleq    Ldumpstm

                teq     frame, next
                movne   frame, next
                teqne   frame, #0
                bne     Lloop
                LOADREGS(fd, sp!, {r4 - r8, pc})


#define instr r4
#define reg   r5
#define stack r6

Ldumpstm:       stmfd   sp!, {instr, reg, stack, lr}
                mov     stack, r0
                mov     instr, r1
                mov     reg, #9

1:              mov     r3, #1
                tst     instr, r3, lsl reg
                beq     2f
                ldr     r2, [stack], #-4
                mov     r1, reg
                adr     r0, Lfp
                bl      printk
2:              subs    reg, reg, #1
                bpl     1b

                mov     r0, stack
                LOADREGS(fd, sp!, {instr, reg, stack, pc})

Lfe:            .ascii  "Function entered at [<%p>] from [<%p>]\n"
                .byte 0
Lfp:            .ascii  "  r%d = %p\n"
                .byte 0
                .align
Ldsi:           .word   0x00e92dd8 >> 2
                .word   0x00e92d00 >> 2

Go to most recent revision | Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.