OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [uclinux/] [uClinux-2.0.x/] [arch/] [m68k/] [config.in] - Rev 1765

Compare with Previous | Blame | View Log

#
# For a description of the syntax of this configuration file,
# see the Configure script.
#
mainmenu_name "Linux/68k Kernel Configuration"

mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
  bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
  bool 'Kernel daemon support (e.g. autoload of modules)' CONFIG_KERNELD
fi
endmenu

mainmenu_option next_comment
comment 'General setup'

bool 'Amiga support' CONFIG_AMIGA
bool 'Atari support' CONFIG_ATARI
bool 'Macintosh support' CONFIG_MAC
bool '68040 floating point software package' CONFIG_FPSP_040
bool '68060 integer/floating point software package' CONFIG_IFPSP_060
bool 'Networking support' CONFIG_NET
bool 'System V IPC' CONFIG_SYSVIPC
tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
if [ "$CONFIG_BINFMT_ELF" = "y" ]; then
  bool 'Compile kernel as ELF - if your GCC is ELF-GCC' CONFIG_KERNEL_ELF
fi
if [ "$CONFIG_AMIGA" = "y" ]; then
  bool 'Amiga AutoConfig Identification' CONFIG_ZORRO
fi
endmenu

#
# Block device driver configuration
#
mainmenu_option next_comment
comment 'Floppy, IDE, and other block devices'

tristate 'Normal floppy disk support' CONFIG_BLK_DEV_FD
bool 'IDE harddisk support' CONFIG_BLK_DEV_IDE
if [ "$CONFIG_AMIGA" = "y" ]; then
bool 'Amiga Cybervision support' CONFIG_FB_CYBER
bool 'Amiga Zorro II ramdisk support' CONFIG_AMIGA_Z2RAM
fi
if [ "$CONFIG_ATARI" = "y" ]; then
bool 'Atari ACSI support' CONFIG_ATARI_ACSI
fi

tristate 'RAM disk support' CONFIG_BLK_DEV_RAM
if [ "$CONFIG_BLK_DEV_RAM" = "y" ]; then
  bool '   Initial RAM disk (initrd) support' CONFIG_BLK_DEV_INITRD
fi

tristate 'Loopback device support' CONFIG_BLK_DEV_LOOP
endmenu

if [ "$CONFIG_NET" = "y" ]; then
  source net/Config.in
fi

mainmenu_option next_comment
comment 'SCSI support'

tristate 'SCSI support' CONFIG_SCSI

if [ "$CONFIG_SCSI" != "n" ]; then

comment 'SCSI support type (disk, tape, CDrom)'

dep_tristate 'SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
dep_tristate 'SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI
dep_tristate 'SCSI CDROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI
dep_tristate 'SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI

comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'

bool 'Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN

bool 'Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS

mainmenu_option next_comment
comment 'SCSI low-level drivers'

if [ "$CONFIG_AMIGA" = "y" ]; then
bool 'A3000 WD33C93A support' CONFIG_A3000_SCSI
bool 'A2091 WD33C93A support' CONFIG_A2091_SCSI
bool 'GVP Series II WD33C93A support' CONFIG_GVP11_SCSI
fi
if [ "$CONFIG_ATARI" = "y" ]; then
dep_tristate 'Atari native SCSI support' CONFIG_ATARI_SCSI $CONFIG_SCSI
fi
#dep_tristate 'SCSI debugging host adapter' CONFIG_SCSI_DEBUG $CONFIG_SCSI
endmenu

fi
endmenu

if [ "$CONFIG_NET" = "y" ]; then

mainmenu_option next_comment
comment 'Network device support'

bool 'Network device support' CONFIG_NETDEVICES
if [ "$CONFIG_NETDEVICES" = "y" ]; then
#
# Network device configuration
#
tristate 'Dummy net driver support' CONFIG_DUMMY
tristate 'SLIP (serial line) support' CONFIG_SLIP
if [ "$CONFIG_SLIP" != "n" ]; then
  bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
fi
tristate 'PPP (point-to-point) support' CONFIG_PPP
if [ ! "$CONFIG_PPP" = "n" ]; then
  comment 'CCP compressors for PPP are only built as modules.'
fi
tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER
if [ "$CONFIG_AMIGA" = "y" ]; then
  tristate 'Ariadne support' CONFIG_ARIADNE
  tristate 'A2065 support' CONFIG_A2065
  tristate 'Hydra support' CONFIG_HYDRA
fi
if [ "$CONFIG_ATARI" = "y" ]; then
  bool 'Atari Lance support' CONFIG_ATARILANCE
fi
fi
endmenu

fi

source fs/Config.in

mainmenu_option next_comment
comment 'Character devices'

bool 'Parallel printer support' CONFIG_PRINTER
if [ "$CONFIG_AMIGA" = "y" ]; then
  tristate 'Amiga mouse support' CONFIG_AMIGAMOUSE
fi
if [ "$CONFIG_ATARI" = "y" ]; then
  tristate 'Atari mouse support' CONFIG_ATARIMOUSE
fi
if [ "$CONFIG_ATARI" = y ]; then
  tristate 'Atari MFP serial support' CONFIG_ATARI_MFPSER
  tristate 'Atari SCC serial support' CONFIG_ATARI_SCC
  tristate 'Atari MIDI serial support' CONFIG_ATARI_MIDI
fi
if [ "$CONFIG_AMIGA" = y ]; then
  tristate 'Amiga builtin serial support' CONFIG_AMIGA_BUILTIN_SERIAL
  bool 'GVP IO-Extender support' CONFIG_GVPIOEXT
  tristate 'Multiface Card III serial support' CONFIG_MULTIFACE_III_TTY
fi
bool 'Support for user serial device modules' CONFIG_USERIAL
bool 'Watchdog Timer Support'   CONFIG_WATCHDOG
if [ "$CONFIG_WATCHDOG" != "n" ]; then
  bool '   Disable watchdog shutdown on close' CONFIG_WATCHDOG_NOWAYOUT
  bool '   Software Watchdog' CONFIG_SOFT_WATCHDOG
fi
bool 'Support for user misc device modules' CONFIG_UMISC
endmenu

mainmenu_option next_comment
comment 'Sound support'

bool 'Sound support' CONFIG_SOUND y
if [ "$CONFIG_SOUND" != "n" ]; then
  bool 'Amiga or Atari DMA sound support' CONFIG_DMASOUND y
fi
endmenu

mainmenu_option next_comment
comment 'Kernel hacking'

#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
bool 'Kernel profiling support' CONFIG_PROFILE
if [ "$CONFIG_PROFILE" = "y" ]; then
  int ' Profile shift count' CONFIG_PROFILE_SHIFT 2
fi
endmenu

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.