Subversion Repositories or1k

/* -*- mode: asm -*-
 *
 *  linux/arch/m68knommu/platform/5307/entry.S
 *
 *  Copyright (C) 1999  Greg Ungerer (gerg@moreton.com.au)
 *  Copyright (C) 1998  D. Jeff Dionne <jeff@ryeham.ee.ryerson.ca>,
 *                      Kenneth Albanowski <kjahds@kjahds.com>,
 *                      The Silver Hammer Group, Ltd.
 *
 * Based on:
 *
 *  linux/arch/m68k/kernel/entry.S
 *
 *  Copyright (C) 1991, 1992  Linus Torvalds
 *
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file README.legal in the main directory of this archive
 * for more details.
 *
 * Linux/m68k support by Hamish Macdonald
 *
 * 68060 fixes by Jesper Skov
 * ColdFire support by Greg Ungerer (gerg@moreton.com.au)
 * 5307 fixes by David W. Miller
 */

/*
 * entry.S  contains the system-call and fault low-level handling routines.
 * This also contains the timer-interrupt handler, as well as all interrupts
 * and faults that can result in a task-switch.
 *
 * NOTE: This code handles signal-recognition, which happens every time
 * after a timer-interrupt and after each system call.
 *
 * Stack layout in 'ret_from_exception':
 *
 *      This allows access to the syscall arguments in registers d1-d5
 *
 *       0(sp) - d1
 *       4(sp) - d2
 *       8(sp) - d3
 *       C(sp) - d4
 *      10(sp) - d5
 *      14(sp) - a0
 *      18(sp) - a1
 *      1C(sp) - d0
 *      20(sp) - orig_d0
 *      24(sp) - stack adjustment
 *      28(sp) - format & vector      }
 *      2A(sp) - sr                   } different to m68k
 *      2C(sp) - pc                   }
 */

#include <linux/sys.h>
#include <linux/config.h>
#include <linux/linkage.h>
#include <asm/setup.h>
#include <asm/segment.h>

LENOSYS = 38

/*
 * these are offsets into the task-struct
 */
LTASK_STATE     =  0
LTASK_COUNTER   =  4
LTASK_PRIORITY  =  8
LTASK_SIGNAL    = 12
LTASK_BLOCKED   = 16
LTASK_FLAGS     = 20

/* the following macro is used when enabling interrupts */
#define ALLOWINT 0xf8ff
#define MAX_NOINT_IPL   0


LD0             = 0x1C
LORIG_D0        = 0x20
LSR             = 0x2a
LFORMATVEC      = 0x28
LPC             = 0x2c

/*
 * This defines the normal kernel pt-regs layout.
 *
 * regs are a2-a6 and d6-d7 preserved by C code
 * the kernel doesn't mess with usp unless it needs to
 *
 *      This is made a little more tricky on the ColdFire. There is no
 *      separate kernel and user stack pointers. Need to artificially
 *      construct a usp in software... When doing this we need to disable
 *      interrupts, otherwise bad things could happen.
 */
#define SAVE_ALL                                                \
        move    #0x2700,%sr;            /* disable intrs */     \
        btst    #5,%sp@(2);             /* from user? */        \
        bnes    1f;                     /* no, skip */          \
        addl    #8,%sp;                 /* remove exception */  \
        movel   %sp,sw_usp;             /* save user sp */      \
        movel   sw_ksp,%sp;             /* kernel sp */         \
        subql   #8,%sp;                 /* room for exception */\
        clrl    %sp@-;                  /* stk_adj */           \
        movel   %d0,%sp@-;              /* orig d0 */           \
        movel   %d0,%sp@-;              /* d0 */                \
        subl    #28,%sp;                /* space for 7 regs */  \
        moveml  %d1-%d5/%a0-%a1,%sp@;                           \
        movel   sw_usp,%a0;             /* get usp */           \
        moveml  %a0@(-8),%d1-%d2;       /* get exception */     \
        moveml  %d1-%d2,%sp@(LFORMATVEC); /* copy exception */  \
        bra     2f;                                             \
        1:                                                      \
        clrl    %sp@-;                  /* stk_adj */           \
        movel   %d0,%sp@-;              /* orig d0 */           \
        movel   %d0,%sp@-;              /* d0 */                \
        subl    #28,%sp;                /* space for 7 regs */  \
        moveml  %d1-%d5/%a0-%a1,%sp@;                           \
        2:

#define RESTORE_ALL                                             \
        btst    #5,%sp@(LSR);           /* going user? */       \
        bnes    1f;                     /* no, skip */          \
        move    #0x2700,%sr;            /* disable intrs */     \
        movel   sw_usp,%a0;             /* get usp */           \
        moveml  %sp@(LFORMATVEC),%d1-%d2; /* copy exception */  \
        moveml  %d1-%d2,%a0@(-8);                               \
        moveml  %sp@,%d1-%d5/%a0-%a1;                           \
        addl    #28,%sp;                /* space for 7 regs */  \
        movel   %sp@+,%d0;                                      \
        addql   #4,%sp;                 /* orig d0 */           \
        addl    %sp@+,%sp;              /* stk adj */           \
        addql   #8,%sp;                 /* remove exception */  \
        movel   %sp,sw_ksp;             /* save ksp */          \
        movel   sw_usp,%sp;             /* restore usp */       \
        subql   #8,%sp;                 /* set exception */     \
        rte;                                                    \
        1:                                                      \
        moveml  %sp@,%d1-%d5/%a0-%a1;                           \
        addl    #28,%sp;                /* space for 7 regs */  \
        movel   %sp@+,%d0;                                      \
        addql   #4,%sp;                 /* orig d0 */           \
        addl    %sp@+,%sp;              /* stk adj */           \
        rte

/*
 *      Quick exception save, use current stack only.
 */
#define SAVE_LOCAL                                              \
        move    #0x2700,%sr;            /* disable intrs */     \
        clrl    %sp@-;                  /* stk_adj */           \
        movel   %d0,%sp@-;              /* orig d0 */           \
        movel   %d0,%sp@-;              /* d0 */                \
        subl    #28,%sp;                /* space for 7 regs */  \
        moveml  %d1-%d5/%a0-%a1,%sp@;

#define RESTORE_LOCAL                                           \
        moveml  %sp@,%d1-%d5/%a0-%a1;                           \
        addl    #28,%sp;                /* space for 7 regs */  \
        movel   %sp@+,%d0;                                      \
        addql   #4,%sp;                 /* orig d0 */           \
        addl    %sp@+,%sp;              /* stk adj */           \
        rte


#define SWITCH_STACK_SIZE (7*4+4)       /* includes return address */

#define SAVE_SWITCH_STACK               \
        subl    #28,%sp; /* 7 regs */   \
        moveml  %a2-%a6/%d6-%d7,%sp@

#define RESTORE_SWITCH_STACK            \
        moveml  %sp@,%a2-%a6/%d6-%d7;   \
        addl    #28,%sp /* 7 regs */

/*
 *      Software copy of the user and kernel stack pointers... Ugh...
 *      Need these to get around ColdFire not having separate kernel
 *      and user stack pointers.
 */
.globl SYMBOL_NAME(sw_usp)
.globl SYMBOL_NAME(sw_ksp)

.data

sw_ksp:
.long   0

sw_usp:
.long   0

.text


.globl SYMBOL_NAME(buserr)
.globl SYMBOL_NAME(trap)
.globl SYMBOL_NAME(system_call)
.globl SYMBOL_NAME(resume), SYMBOL_NAME(ret_from_exception)
.globl SYMBOL_NAME(ret_from_signal)
.globl SYMBOL_NAME(sys_call_table)
.globl SYMBOL_NAME(sys_fork), SYMBOL_NAME(sys_clone)
.globl SYMBOL_NAME(ret_from_interrupt)
.globl SYMBOL_NAME(intrhandler)
.globl SYMBOL_NAME(fasthandler)

.text

ENTRY(buserr)
        SAVE_ALL
        moveq   #-1,%d0
        movel   %d0,%sp@(LORIG_D0)      | a -1 in the ORIG_D0 field
                                        | signifies that the stack frame
                                        | is NOT for syscall

        movel   %sp,%sp@-               | stack frame pointer argument
        jsr     SYMBOL_NAME(buserr_c)
        addql   #4,%sp
        jra     SYMBOL_NAME(ret_from_exception)


ENTRY(reschedule)
        | save top of frame
        pea     %sp@
        jbsr    SYMBOL_NAME(set_esp0)
        addql   #4,%sp

        pea     SYMBOL_NAME(ret_from_exception)
        jmp     SYMBOL_NAME(schedule)

ENTRY(system_call)
        SAVE_ALL
        move    #0x2000,%sr;            | enable intrs again

        movel   #-LENOSYS,%d2
        movel   %d2,LD0(%sp)            | default return value in d0
                                        | original D0 is in orig_d0
        movel   %d0,%d2

        | save top of frame
        pea     %sp@
        jbsr    SYMBOL_NAME(set_esp0)
        addql   #4,%sp

        cmpl    #NR_syscalls,%d2
        jcc     SYMBOL_NAME(ret_from_exception)
        lea     SYMBOL_NAME(sys_call_table),%a0
        lsll    #2,%d2          | movel %a0@(%d2:l:4),%d3
        movel   %a0@(%d2),%d3
        jeq     SYMBOL_NAME(ret_from_exception)
        lsrl    #2,%d2
        movel   SYMBOL_NAME(current_set),%a0
        btst    #5,%a0@(LTASK_FLAGS+3)  | PF_TRACESYS
        bnes    1f
        movel   %d3,%a0
        jbsr    %a0@
        movel   %d0,%sp@(LD0)           | save the return value
        jra     SYMBOL_NAME(ret_from_exception)
1:
        subql   #4,%sp
        SAVE_SWITCH_STACK
        jbsr    SYMBOL_NAME(syscall_trace)
        RESTORE_SWITCH_STACK
        addql   #4,%sp
        movel   %d3,%a0
        jbsr    %a0@
        movel   %d0,%sp@(LD0)           | save the return value
        subql   #4,%sp                  | dummy return address
        SAVE_SWITCH_STACK
        jbsr    SYMBOL_NAME(syscall_trace)

SYMBOL_NAME_LABEL(ret_from_signal)
        RESTORE_SWITCH_STACK
        addql   #4,%sp

SYMBOL_NAME_LABEL(ret_from_exception)
        btst    #5,%sp@(LSR)            | check if returning to kernel
        bnes    2f                      | if so, skip resched, signals
        tstl    SYMBOL_NAME(need_resched)
        jne     SYMBOL_NAME(reschedule)
        movel   SYMBOL_NAME(current_set),%a0
        cmpl    #SYMBOL_NAME(task),%a0  | task[0] cannot have signals
        jeq     2f
        bclr    #5,%a0@(LTASK_FLAGS+1)  | check for delayed trace
        jeq     1f
        bclr    #7,%sp@(LSR)            | clear trace bit in SR
        pea     1                       | send SIGTRAP
        movel   %a0,%sp@-
        pea     5
        jbsr    SYMBOL_NAME(send_sig)
        addql   #8,%sp
        addql   #4,%sp
        movel   SYMBOL_NAME(current_set),%a0

1:
        tstl    %a0@(LTASK_STATE)       | state
        jne     SYMBOL_NAME(reschedule)
        tstl    %a0@(LTASK_COUNTER)     | counter
        jeq     SYMBOL_NAME(reschedule)

        movel   %a0@(LTASK_BLOCKED),%d0
        movel   %d0,%d1                 | save blocked in d1 for sig handling
        notl    %d0
        btst    #4,%a0@(LTASK_FLAGS+3)  | PF_PTRACED
        jeq     1f
        moveq   #-1,%d0                 | let the debugger see all signals
1:      andl    %a0@(LTASK_SIGNAL),%d0
        jne     Lsignal_return
2:      RESTORE_ALL                     | Does RTE

Lsignal_return:
        subql   #4,%sp                  | dummy return address
        SAVE_SWITCH_STACK
        pea     %sp@(SWITCH_STACK_SIZE)
        movel   %d1,%sp@-
        jsr     SYMBOL_NAME(do_signal)
        addql   #8,%sp
        RESTORE_SWITCH_STACK
        addql   #4,%sp

        btst    #5,%sp@(LSR);   /* going user? */   
        bnes    not_user;       /* no, skip */      
        move    #0x2700,%sr;    /* disable intrs */ 
        movel   sw_usp,%a0;     /* get usp */       
        moveml  %sp@(LFORMATVEC),%d1-%d2; /* copy exception */  
        moveml  %d1-%d2,%a0@(-8);               
        bclr    #5,%a0@(-8);  /* clear format byte, bit 5 to make stack appear modulo 4 which it WILL be when we do the rte because it was generated in setup_frame */
        bclr    #4,%a0@(-8);  /* clear format byte, bit 5 to make stack appear modulo 4 which it WILL be when we do the rte because it was generated in setup_frame */
        moveml  %sp@,%d1-%d5/%a0-%a1;               
        addl    #28,%sp;        /* space for 7 regs */  
        movel   %sp@+,%d0;                  
        addql   #4,%sp;         /* orig d0 */       
        addl    %sp@+,%sp;      /* stk adj */       
        addql   #8,%sp;         /* remove exception */  
        movel   %sp,sw_ksp;     /* save ksp */      
        movel   sw_usp,%sp;     /* restore usp */   
        subql   #8,%sp;         /* set exception */ 
        rte;                            
not_user:                          
        moveml  %sp@,%d1-%d5/%a0-%a1;               
        addl    #28,%sp;        /* space for 7 regs */  
        movel   %sp@+,%d0;                  
        addql   #4,%sp;         /* orig d0 */       
        addl    %sp@+,%sp;      /* stk adj */       
        rte

/*--------------------------------------------------------------------------*/

/*
 *      Common ColdFire trap handler. Most traps come through here first.
 */
ENTRY(trap)
        SAVE_ALL
        moveq   #-1,%d0
        movel   %d0,%sp@(LORIG_D0)      | a -1 in the ORIG_D0 field
                                        | signifies that the stack frame
                                        | is NOT for syscall
        movew   %sp@(LFORMATVEC),%d0    | get exception vector
        andl    #0x03fc,%d0             | mask out vector only
        lsrl    #2,%d0                  | calculate real vector #
        movel   %sp,%sp@-               | stack frame pointer argument
        movel   %d0,%sp@-               | push vector # on stack

        jsr     SYMBOL_NAME(trap_c)
        addql   #8,%sp
        jra     SYMBOL_NAME(ret_from_exception)


/*
 *      This is the generic interrupt handler (for all hardware interrupt
 *      sources). It figures out the vector number and calls the appropriate
 *      interrupt service routine directly.
 */
SYMBOL_NAME_LABEL(intrhandler)
        SAVE_ALL

        moveq   #-1,%d0
        movel   %d0,%sp@(LORIG_D0)      | a -1 in the ORIG_D0 field
                                        | signifies that the stack frame
                                        | is NOT for syscall
        addql   #1,SYMBOL_NAME(intr_count)
                                        | put exception # in d0
        movew   %sp@(LFORMATVEC),%d0
        andl    #0x03fc,%d0             | mask out vector only

        movel   SYMBOL_NAME(irq_kstat_interrupt),%a0
                                        | get addr of kstat struct
        addql   #1,%a0@(%d0)            | incr irq intr count

        lsrl    #2,%d0                  | calculate real vector #
        movel   %d0,%d1                 | calculate array offset
        lsll    #4,%d1
        lea     SYMBOL_NAME(vec_list),%a0
        addl    %d1,%a0                 | pointer to array struct

        movel   %sp,%sp@-               | push regs arg onto stack
        movel   %a0@(8),%sp@-           | push devid arg
        movel   %d0,%sp@-               | push vector # on stack

        movel   %a0@,%a0                | get function to call
        jbsr    %a0@                    | call vector handler
        addl    #12,%sp                 | pop parameters off stack

        bra     ret_from_interrupt      | this was fallthrough


/*
 *      This is the fast interrupt handler (for certain hardware interrupt
 *      sources). Unlike the normal interrupt handler it just uses the
 *      current stack (doesn't care if it is user or kernel). It also
 *      doesn't bother doing the bottom half handlers.
 */
SYMBOL_NAME_LABEL(fasthandler)
        SAVE_LOCAL

        movew   %sp@(LFORMATVEC),%d0
        andl    #0x03fc,%d0             | mask out vector only

        movel   SYMBOL_NAME(irq_kstat_interrupt),%a0
                                        | get addr of kstat struct
        addql   #1,%a0@(%d0)            | incr irq intr count

        movel   %sp,%sp@-               | push regs arg onto stack
        clrl    %d1
        movel   %d1,%sp@-               | push devid arg
        lsrl    #2,%d0                  | calculate real vector #
        movel   %d0,%sp@-               | push vector # on stack

        lsll    #4,%d0                  | adjust for array offset
        lea     SYMBOL_NAME(vec_list),%a0
        movel   %a0@(%d0),%a0           | get function to call
        jbsr    %a0@                    | call vector handler
        addl    #12,%sp                 | pop parameters off stack

        RESTORE_LOCAL

/*--------------------------------------------------------------------------*/

SYMBOL_NAME_LABEL(ret_from_interrupt)
        /* check if we need to do software interrupts */
1:
        movel   SYMBOL_NAME(intr_count),%d1
        subql   #1,%d1
        jne     4f

        |movel  %sp@(LSR),%d0
        |lsr    #5,%d0
        moveb   %sp@(LSR),%d0
        andl    #0x7,%d0
        |bfextu  %sp@(LSR){#5,#3},%d0    | Check for nested interrupt.
#if MAX_NOINT_IPL > 0
        cmpiw   #MAX_NOINT_IPL,%d0
#endif
        jhi     4f

        move    #0x2000,%sr;            | enable intrs again

2:
        movel   SYMBOL_NAME(bh_active),%d0
        andl    SYMBOL_NAME(bh_mask),%d0
        jne     3f

        clrl    SYMBOL_NAME(intr_count) | deliver signals, reschedule etc..
        jra     SYMBOL_NAME(ret_from_exception)
3:      
        jbsr    SYMBOL_NAME(do_bottom_half)
        jbra    2b
4:
        movel   %d1,SYMBOL_NAME(intr_count)
        RESTORE_ALL


/* Handler for uninitialized and spurious interrupts */

SYMBOL_NAME_LABEL(bad_interrupt)
        addql   #1,SYMBOL_NAME(num_spurious)
        rte

ENTRY(sys_fork)
        SAVE_SWITCH_STACK
        pea     %sp@(SWITCH_STACK_SIZE)
        jbsr    SYMBOL_NAME(m68k_fork)
        addql   #4,%sp
        RESTORE_SWITCH_STACK
        rts

ENTRY(sys_clone)
        SAVE_SWITCH_STACK
        pea     %sp@(SWITCH_STACK_SIZE)
        jbsr    SYMBOL_NAME(m68k_clone)
        addql   #4,%sp
        RESTORE_SWITCH_STACK
        rts

ENTRY(sys_sigsuspend)
        SAVE_SWITCH_STACK
        pea     %sp@(SWITCH_STACK_SIZE)
        jbsr    SYMBOL_NAME(do_sigsuspend)
        addql   #4,%sp
        RESTORE_SWITCH_STACK
        rts

ENTRY(sys_sigreturn)
        SAVE_SWITCH_STACK
        jbsr    SYMBOL_NAME(do_sigreturn)
        RESTORE_SWITCH_STACK
        rts

LTSS_KSP        = 0
LTSS_USP        = 4
LTSS_SR         = 8
LTSS_FS         = 10
LTSS_CRP        = 12
LTSS_FPCTXT     = 24

SYMBOL_NAME_LABEL(resume)
        /*
         * Beware - when entering resume, offset of tss is in d1,
         * prev (the current task) is in a0, next (the new task)
         * is in a1 and d2.b is non-zero if the mm structure is
         * shared between the tasks, so don't change these
         * registers until their contents are no longer needed.
         */

        /* offset of tss struct (processor state) from beginning
           of task struct */
        addl    %d1,%a0

        /* save sr */
        move    %sr,%d0
        movew   %d0,%a0@(LTSS_SR)

        /* disable interrupts */
        oril    #0x700,%d0
        move    %d0,%sr

#ifndef NO_MM
        /* save fs (sfc,%dfc) (may be pointing to kernel memory) */
        movec   %sfc,%d0
        movew   %d0,%a0@(LTSS_FS)
#endif

        /* save usp */
        /* it is better to use a movel here instead of a movew 8*) */
        

        /* save non-scratch registers on stack */
        SAVE_SWITCH_STACK

        /* Use the sw_usp, no real %usp */
        movel   sw_usp,%a2 /* usp */
        movel   %a2,%a0@(LTSS_USP)
#if 0
        /* busted */
        movel   %usp,%d0 /* usp */
        movel   %d0,%a0@(LTSS_USP)
#endif

        /* save current kernel stack pointer */
        movel   %sp,%a0@(LTSS_KSP)

        /* get pointer to tss struct (a1 contains new task) */
        movel   %a1,SYMBOL_NAME(current_set)
        addl    %d1,%a1

        /* Skip address space switching if they are the same. */
        /* FIXME: what did we hack out of here, this does nothing! */
#if 0
        tstb    %d2
        jne     4f
#endif
2:
4:
        /* restore floating point context */

        /* restore the kernel stack pointer */
        movel   %a1@(LTSS_KSP),%sp

        /* restore non-scratch registers */
        RESTORE_SWITCH_STACK

        /* restore user stack pointer */
        movel   %a1@(LTSS_USP),%a0
        /* No %usp, use a software copy */
        movel   %a0,sw_usp

#ifndef NO_MM
        /* restore fs (sfc,%dfc) */
        movew   %a1@(LTSS_FS),%a0
        movec   %a0,%sfc
        movec   %a0,%dfc
#endif

        /* restore status register */
        movel   %d0,%a0
        move    %a1@(LTSS_SR),%d0
        move    %d0,%sr
        movel   %a0,%d0
        rts

.text
ALIGN
SYMBOL_NAME_LABEL(sys_call_table)
        .long SYMBOL_NAME(sys_setup)            /* 0 */
        .long SYMBOL_NAME(sys_exit)
        .long SYMBOL_NAME(sys_fork)
        .long SYMBOL_NAME(sys_read)
        .long SYMBOL_NAME(sys_write)
        .long SYMBOL_NAME(sys_open)             /* 5 */
        .long SYMBOL_NAME(sys_close)
        .long SYMBOL_NAME(sys_waitpid)
        .long SYMBOL_NAME(sys_creat)
        .long SYMBOL_NAME(sys_link)
        .long SYMBOL_NAME(sys_unlink)           /* 10 */
        .long SYMBOL_NAME(sys_execve)
        .long SYMBOL_NAME(sys_chdir)
        .long SYMBOL_NAME(sys_time)
        .long SYMBOL_NAME(sys_mknod)
        .long SYMBOL_NAME(sys_chmod)            /* 15 */
        .long SYMBOL_NAME(sys_chown)
        .long SYMBOL_NAME(sys_break)
        .long SYMBOL_NAME(sys_stat)
        .long SYMBOL_NAME(sys_lseek)
        .long SYMBOL_NAME(sys_getpid)           /* 20 */
        .long SYMBOL_NAME(sys_mount)
        .long SYMBOL_NAME(sys_umount)
        .long SYMBOL_NAME(sys_setuid)
        .long SYMBOL_NAME(sys_getuid)
        .long SYMBOL_NAME(sys_stime)            /* 25 */
        .long SYMBOL_NAME(sys_ptrace)
        .long SYMBOL_NAME(sys_alarm)
        .long SYMBOL_NAME(sys_fstat)
        .long SYMBOL_NAME(sys_pause)
        .long SYMBOL_NAME(sys_utime)            /* 30 */
        .long SYMBOL_NAME(sys_stty)
        .long SYMBOL_NAME(sys_gtty)
        .long SYMBOL_NAME(sys_access)
        .long SYMBOL_NAME(sys_nice)
        .long SYMBOL_NAME(sys_ftime)            /* 35 */
        .long SYMBOL_NAME(sys_sync)
        .long SYMBOL_NAME(sys_kill)
        .long SYMBOL_NAME(sys_rename)
        .long SYMBOL_NAME(sys_mkdir)
        .long SYMBOL_NAME(sys_rmdir)            /* 40 */
        .long SYMBOL_NAME(sys_dup)
        .long SYMBOL_NAME(sys_pipe)
        .long SYMBOL_NAME(sys_times)
        .long SYMBOL_NAME(sys_prof)
        .long SYMBOL_NAME(sys_brk)              /* 45 */
        .long SYMBOL_NAME(sys_setgid)
        .long SYMBOL_NAME(sys_getgid)
        .long SYMBOL_NAME(sys_signal)
        .long SYMBOL_NAME(sys_geteuid)
        .long SYMBOL_NAME(sys_getegid)          /* 50 */
        .long SYMBOL_NAME(sys_acct)
        .long SYMBOL_NAME(sys_phys)
        .long SYMBOL_NAME(sys_lock)
        .long SYMBOL_NAME(sys_ioctl)
        .long SYMBOL_NAME(sys_fcntl)            /* 55 */
        .long SYMBOL_NAME(sys_mpx)
        .long SYMBOL_NAME(sys_setpgid)
        .long SYMBOL_NAME(sys_ulimit)
        .long SYMBOL_NAME(sys_olduname)
        .long SYMBOL_NAME(sys_umask)            /* 60 */
        .long SYMBOL_NAME(sys_chroot)
        .long SYMBOL_NAME(sys_ustat)
        .long SYMBOL_NAME(sys_dup2)
        .long SYMBOL_NAME(sys_getppid)
        .long SYMBOL_NAME(sys_getpgrp)          /* 65 */
        .long SYMBOL_NAME(sys_setsid)
        .long SYMBOL_NAME(sys_sigaction)
        .long SYMBOL_NAME(sys_sgetmask)
        .long SYMBOL_NAME(sys_ssetmask)
        .long SYMBOL_NAME(sys_setreuid)         /* 70 */
        .long SYMBOL_NAME(sys_setregid)
        .long SYMBOL_NAME(sys_sigsuspend)
        .long SYMBOL_NAME(sys_sigpending)
        .long SYMBOL_NAME(sys_sethostname)
        .long SYMBOL_NAME(sys_setrlimit)        /* 75 */
        .long SYMBOL_NAME(sys_getrlimit)
        .long SYMBOL_NAME(sys_getrusage)
        .long SYMBOL_NAME(sys_gettimeofday)
        .long SYMBOL_NAME(sys_settimeofday)
        .long SYMBOL_NAME(sys_getgroups)        /* 80 */
        .long SYMBOL_NAME(sys_setgroups)
        .long SYMBOL_NAME(old_select)
        .long SYMBOL_NAME(sys_symlink)
        .long SYMBOL_NAME(sys_lstat)
        .long SYMBOL_NAME(sys_readlink)         /* 85 */
        .long SYMBOL_NAME(sys_uselib)
        .long SYMBOL_NAME(sys_swapon)
        .long SYMBOL_NAME(sys_reboot)
        .long SYMBOL_NAME(old_readdir)
        .long SYMBOL_NAME(old_mmap)             /* 90 */
        .long SYMBOL_NAME(sys_munmap)
        .long SYMBOL_NAME(sys_truncate)
        .long SYMBOL_NAME(sys_ftruncate)
        .long SYMBOL_NAME(sys_fchmod)
        .long SYMBOL_NAME(sys_fchown)           /* 95 */
        .long SYMBOL_NAME(sys_getpriority)
        .long SYMBOL_NAME(sys_setpriority)
        .long SYMBOL_NAME(sys_profil)
        .long SYMBOL_NAME(sys_statfs)
        .long SYMBOL_NAME(sys_fstatfs)          /* 100 */
        .long SYMBOL_NAME(sys_ioperm)
        .long SYMBOL_NAME(sys_socketcall)
        .long SYMBOL_NAME(sys_syslog)
        .long SYMBOL_NAME(sys_setitimer)
        .long SYMBOL_NAME(sys_getitimer)        /* 105 */
        .long SYMBOL_NAME(sys_newstat)
        .long SYMBOL_NAME(sys_newlstat)
        .long SYMBOL_NAME(sys_newfstat)
        .long SYMBOL_NAME(sys_uname)
        .long SYMBOL_NAME(sys_ni_syscall)       /* iopl for i386 */ /* 110 */
        .long SYMBOL_NAME(sys_vhangup)
        .long SYMBOL_NAME(sys_idle)
        .long SYMBOL_NAME(sys_ni_syscall)       /* vm86 for i386 */
        .long SYMBOL_NAME(sys_wait4)
        .long SYMBOL_NAME(sys_swapoff)          /* 115 */
        .long SYMBOL_NAME(sys_sysinfo)
        .long SYMBOL_NAME(sys_ipc)
        .long SYMBOL_NAME(sys_fsync)
        .long SYMBOL_NAME(sys_sigreturn)
        .long SYMBOL_NAME(sys_clone)            /* 120 */
        .long SYMBOL_NAME(sys_setdomainname)
        .long SYMBOL_NAME(sys_newuname)
        .long SYMBOL_NAME(sys_cacheflush)       /* modify_ldt for i386 */
        .long SYMBOL_NAME(sys_adjtimex)
        .long SYMBOL_NAME(sys_mprotect)         /* 125 */
        .long SYMBOL_NAME(sys_sigprocmask)
        .long SYMBOL_NAME(sys_create_module)
        .long SYMBOL_NAME(sys_init_module)
        .long SYMBOL_NAME(sys_delete_module)
        .long SYMBOL_NAME(sys_get_kernel_syms)  /* 130 */
        .long SYMBOL_NAME(sys_quotactl)
        .long SYMBOL_NAME(sys_getpgid)
        .long SYMBOL_NAME(sys_fchdir)
        .long SYMBOL_NAME(sys_bdflush)
        .long SYMBOL_NAME(sys_sysfs)            /* 135 */
        .long SYMBOL_NAME(sys_personality)
        .long SYMBOL_NAME(sys_ni_syscall)       /* for afs_syscall */
        .long SYMBOL_NAME(sys_setfsuid)
        .long SYMBOL_NAME(sys_setfsgid)
        .long SYMBOL_NAME(sys_llseek)           /* 140 */
        .long SYMBOL_NAME(sys_getdents)
        .long SYMBOL_NAME(sys_select)
        .long SYMBOL_NAME(sys_flock)
        .long SYMBOL_NAME(sys_msync)
        .long SYMBOL_NAME(sys_readv)            /* 145 */
        .long SYMBOL_NAME(sys_writev)
        .long SYMBOL_NAME(sys_getsid)
        .long SYMBOL_NAME(sys_fdatasync)
        .long SYMBOL_NAME(sys_sysctl)
        .long SYMBOL_NAME(sys_mlock)            /* 150 */
        .long SYMBOL_NAME(sys_munlock)
        .long SYMBOL_NAME(sys_mlockall)
        .long SYMBOL_NAME(sys_munlockall)
        .long SYMBOL_NAME(sys_sched_setparam)
        .long SYMBOL_NAME(sys_sched_getparam)   /* 155 */
        .long SYMBOL_NAME(sys_sched_setscheduler)
        .long SYMBOL_NAME(sys_sched_getscheduler)
        .long SYMBOL_NAME(sys_sched_yield)
        .long SYMBOL_NAME(sys_sched_get_priority_max)
        .long SYMBOL_NAME(sys_sched_get_priority_min)  /* 160 */
        .long SYMBOL_NAME(sys_sched_rr_get_interval)
        .long SYMBOL_NAME(sys_nanosleep)
        .long SYMBOL_NAME(sys_mremap)
        .space (NR_syscalls-163)*4