URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [uclinux/] [uClinux-2.0.x/] [arch/] [mips/] [config.in] - Rev 1765
Compare with Previous | Blame | View Log
#
# For a description of the syntax of this configuration file,
# see the Configure script.
#
mainmenu_name "Linux Kernel Configuration"
mainmenu_option next_comment
comment 'Machine setup'
bool 'Support for Acer PICA 1 chipset' CONFIG_ACER_PICA_61
bool 'Support for DECstation' CONFIG_DECSTATION
bool 'Support for Deskstation RPC44' CONFIG_DESKSTATION_RPC44
bool 'Support for Deskstation Tyne' CONFIG_DESKSTATION_TYNE
bool 'Support for Mips Magnum 3000' CONFIG_MIPS_MAGNUM_3000
bool 'Support for Mips Magnum 4000' CONFIG_MIPS_MAGNUM_4000
bool 'Support for Olivetti M700' CONFIG_OLIVETTI_M700
if [ "$CONFIG_ACER_PICA_61" = "y" -o \
"$CONFIG_MIPS_MAGNUM_4000" = "y" -o \
"$CONFIG_OLIVETTI_M700" = "y" ]; then
define_bool CONFIG_MIPS_JAZZ y
fi
choice 'CPU type' \
"R3000 CONFIG_CPU_R3000 \
R6000 CONFIG_CPU_R6000 \
R4x00 CONFIG_CPU_R4X00 \
R4600 CONFIG_CPU_R4600 \
R8000 CONFIG_CPU_R8000 \
R10000 CONFIG_CPU_R10000" R4x00
if [ "$CONFIG_CPU_R3000" = "y" -o \
"$CONFIG_CPU_R6000" = "y" -o \
"$CONFIG_CPU_R4X00" = "y" -o \
"$CONFIG_CPU_R4600" = "y" -o \
"$CONFIG_CPU_R8000" = "y" ]; then
define_bool CONFIG_TLB_SHUTDOWN y
fi
define_bool CONFIG_BINFMT_ELF y
define_bool CONFIG_BINFMT_AOUT y
bool 'Compile the kernel into the ELF object format' CONFIG_ELF_KERNEL
if [ "$CONFIG_ELF_KERNEL" = "y" ]; then
bool 'Is your ELF compiler an extra compiler' CONFIG_EXTRA_ELF_COMPILER
fi
bool 'Generate little endian code' CONFIG_CPU_LITTLE_ENDIAN
bool 'Networking support' CONFIG_NET
#bool 'PCI bios support' CONFIG_PCI
#if [ "$CONFIG_PCI" = "y" ]; then
# if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
# bool ' PCI bridge optimization (experimental)' CONFIG_PCI_OPTIMIZE
# fi
#fi
bool 'System V IPC' CONFIG_SYSVIPC
endmenu
mainmenu_option next_comment
comment 'Loadable module support'
bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
endmenu
source drivers/block/Config.in
if [ "$CONFIG_NET" = "y" ]; then
source net/Config.in
fi
mainmenu_option next_comment
comment 'SCSI support'
tristate 'SCSI support' CONFIG_SCSI
if [ "$CONFIG_SCSI" != "n" ]; then
source drivers/scsi/Config.in
fi
endmenu
if [ "$CONFIG_NET" = "y" ]; then
mainmenu_option next_comment
comment 'Network device support'
bool 'Network device support' CONFIG_NETDEVICES
if [ "$CONFIG_NETDEVICES" = "y" ]; then
source drivers/net/Config.in
fi
endmenu
fi
mainmenu_option next_comment
comment 'CD-ROM drivers (not for SCSI or IDE/ATAPI drives)'
bool 'Support non-SCSI/IDE/ATAPI drives' CONFIG_CD_NO_IDESCSI
if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
source drivers/cdrom/Config.in
fi
endmenu
source fs/Config.in
source drivers/char/Config.in
bool 'Standard serial device support' CONFIG_SERIAL n
mainmenu_option next_comment
comment 'Sound'
tristate 'Sound card support' CONFIG_SOUND
if [ "$CONFIG_SOUND" != "n" ]; then
source drivers/sound/Config.in
fi
endmenu
mainmenu_option next_comment
comment 'Kernel hacking'
#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
bool 'Kernel profiling support' CONFIG_PROFILE
if [ "$CONFIG_PROFILE" = "y" ]; then
int ' Profile shift count' CONFIG_PROFILE_SHIFT 2
fi
endmenu