OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [uclinux/] [uClinux-2.0.x/] [arch/] [mips/] [kernel/] [pica.S] - Rev 1765

Compare with Previous | Blame | View Log

/*
 * arch/mips/kernel/pica.S
 *
 * Copyright (C) 1995 Waldorf Electronics
 * written by Ralf Baechle and Andreas Busse
 *
 * Acer PICA 61 specific stuff
 */
#include <asm/asm.h>
#include <asm/mipsregs.h>
#include <asm/jazz.h>
#include <asm/pica.h>
#include <asm/stackframe.h>

/*
 * acer_pica_61_handle_int: Interrupt handler for the ACER Pica-61 boards
 * FIXME: this is *very* experimental!
 */
                .set    noreorder

                NESTED(acer_pica_61_handle_int, FR_SIZE, ra)
                .set    noat
                SAVE_ALL
                CLI
                .set    at

                /*
                 * Get pending interrupts
                 */
                mfc0    t0,CP0_CAUSE            # get pending interrupts
                mfc0    t1,CP0_STATUS           # get enabled interrupts
                and     t0,t1                   # isolate allowed ones
                andi    t0,0xff00               # isolate pending bits
                beqz    t0,spurious_interrupt
                sll     t0,16                   # delay slot

                /*
                 * Find irq with highest priority
                 * FIXME: This is slow - use binary search
                 */
                la      t1,ll_vectors
1:              bltz    t0,2f                   # found pending irq
                sll     t0,1
                b       1b
                subu    t1,PTRSIZE              # delay slot

                /*
                 * Do the low-level stuff
                 */
2:              lw      t0,(t1)
                jr      t0
                nop                             # delay slot
                END(acer_pica_61_handle_int)

/*
 * Used for keyboard driver's fake_keyboard_interrupt()
 */
ll_sw0:         li      s1,~IE_SW0
                mfc0    t0,CP0_CAUSE
                and     t0,s1
                mtc0    t0,CP0_CAUSE
        PRINT("sw0 received...\n")
                li      t1,1
                b       call_real
                li      t3,PTRSIZE      # delay slot, re-map to irq level 1

ll_sw1:         li      s1,~IE_SW1
                PANIC("Unimplemented sw1 handler")

ll_local_dma:   li      s1,~IE_IRQ0
                PANIC("Unimplemented local_dma handler")

ll_local_dev:   lbu     t0,JAZZ_IO_IRQ_SOURCE
#if __mips == 3
                dsll    t0,1
                ld      t0,local_vector(t0)
#else /* 32 bit */
                lw      t0,local_vector(t0)
#endif
                jr      t0
                nop


loc_no_irq:     PANIC("Unimplemented loc_no_irq handler")
/*
 * Parallel port IRQ, remapped to level 5
 */
loc_parallel:   li      s1,~JAZZ_IE_PARALLEL
                li      t1,JAZZ_PARALLEL_IRQ
                b       loc_call
                li      t3,PTRSIZE*JAZZ_PARALLEL_IRQ    # delay slot

/*
 * Floppy IRQ, remapped to level 6
 */
loc_floppy:     li      s1,~JAZZ_IE_FLOPPY
                li      t1,JAZZ_FLOPPY_IRQ
                b       loc_call
                li      t3,PTRSIZE*JAZZ_FLOPPY_IRQ      # delay slot

/*
 * Now call the real handler
 */
loc_call:       lui     s3,%hi(intr_count)
                lw      t2,%lo(intr_count)(s3)
                la      t0,IRQ_vectors                  # delay slot
                addiu   t2,1
                sw      t2,%lo(intr_count)(s3)

                /*
                 * Temporarily disable interrupt source
                 */
                lhu     t2,JAZZ_IO_IRQ_ENABLE
                addu    t0,t3                           # make ptr to IRQ handler
                lw      t0,(t0)
                and     t2,s1                           # delay slot
                sh      t2,JAZZ_IO_IRQ_ENABLE
                jalr    t0                              # call IRQ handler
                nor     s1,zero,s1                      # delay slot
 
                /*
                 * Reenable interrupt
                 */
                lhu     t2,JAZZ_IO_IRQ_ENABLE
                lw      t1,%lo(intr_count)(s3)          # delay slot
                or      t2,s1
                sh      t2,JAZZ_IO_IRQ_ENABLE
 
                subu    t1,1
                jr      v0
                sw      t1,%lo(intr_count)(s3)          # delay slot

ll_isa_irq:     li      s1,~IE_IRQ2
                PANIC("Unimplemented isa_irq handler")

ll_isa_nmi:     li      s1,~IE_IRQ3
                PANIC("Unimplemented isa_nmi handler")

/*
 * Timer IRQ
 * We remap the timer irq to be more similar to an IBM compatible
 */
ll_timer:       lw      zero,JAZZ_TIMER_REGISTER # timer irq cleared on read
                li      s1,~IE_IRQ4
                li      t1,0
                b       call_real
                li      t3,0            # delay slot, re-map to irq level 0

/*
 * CPU count/compare IRQ (unused)
 */
ll_count:       j       return
                mtc0    zero,CP0_COMPARE

/*
 * Now call the real handler
 */
call_real:      lui     s3,%hi(intr_count)
                lw      t2,%lo(intr_count)(s3)
                la      t0,IRQ_vectors
                addiu   t2,1
                sw      t2,%lo(intr_count)(s3)

                /*
                 * temporarily disable interrupt
                 */
                mfc0    t2,CP0_STATUS
                and     t2,s1

                addu    t0,t3
                lw      t0,(t0)
                mtc0    t2,CP0_STATUS           # delay slot
                jalr    t0
                nor     s1,zero,s1              # delay slot

                /*
                 * reenable interrupt
                 */
                mfc0    t2,CP0_STATUS
                or      t2,s1
                mtc0    t2,CP0_STATUS

                lw      t2,%lo(intr_count)(s3)
                subu    t2,1

                jr      v0
                sw      t2,%lo(intr_count)(s3)

                .data
                PTR     ll_sw0                  # SW0
                PTR     ll_sw1                  # SW1
                PTR     ll_local_dma            # Local DMA
                PTR     ll_local_dev            # Local devices
                PTR     ll_isa_irq              # ISA IRQ
                PTR     ll_isa_nmi              # ISA NMI
                PTR     ll_timer                # Timer
ll_vectors:     PTR     ll_count                # Count/Compare IRQ


/*
 * Sound? What sound hardware (whistle) ???
 */
loc_sound:      PANIC("Unimplemented loc_sound handler")
loc_video:      PANIC("Unimplemented loc_video handler")

/*
 * Ethernet interrupt handler, remapped to level 2
 */
loc_ethernet:   li      s1,~JAZZ_IE_ETHERNET
                li      t1,JAZZ_ETHERNET_IRQ
                b       loc_call
                li      t3,PTRSIZE*JAZZ_ETHERNET_IRQ    # delay slot

loc_scsi:       PANIC("Unimplemented loc_scsi handler")

/*
 * Keyboard interrupt handler
 */
loc_keyboard:   li      s1,~JAZZ_IE_KEYBOARD
                li      t1,JAZZ_KEYBOARD_IRQ
                b       loc_call
                li      t3,PTRSIZE*JAZZ_KEYBOARD_IRQ    # re-map to irq level 1

loc_mouse:      PANIC("Unimplemented loc_mouse handler")

/*
 * Serial port 1 IRQ, remapped to level 3
 */
loc_serial1:    li      s1,~JAZZ_IE_SERIAL1
                li      t1,JAZZ_SERIAL1_IRQ
                b       loc_call
                li      t3,PTRSIZE*JAZZ_SERIAL1_IRQ     # delay slot

/*
 * Serial port 2 IRQ, remapped to level 4
 */
loc_serial2:    li      s1,~JAZZ_IE_SERIAL2
                li      t1,JAZZ_SERIAL2_IRQ
                b       loc_call
                li      t3,PTRSIZE*JAZZ_SERIAL2_IRQ     # delay slot

                .data
local_vector:   PTR     loc_no_irq
                PTR     loc_parallel
                PTR     loc_floppy
                PTR     loc_sound
                PTR     loc_video
                PTR     loc_ethernet
                PTR     loc_scsi
                PTR     loc_keyboard
                PTR     loc_mouse
                PTR     loc_serial1
                PTR     loc_serial2

                .align  5
                .text
LEAF(spurious_interrupt)
                /*
                 * Nothing happened... (whistle)
                 */
                lui     t1,%hi(spurious_count)
                lw      t0,%lo(spurious_count)(t1)
                la      v0,return
                addiu   t0,1
                jr      ra
                sw      t0,%lo(spurious_count)(t1)
                END(spurious_interrupt)

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.