URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [uclinux/] [uClinux-2.0.x/] [arch/] [sparc/] [kernel/] [sun4c_irq.c] - Rev 199
Go to most recent revision | Compare with Previous | Blame | View Log
/* sun4c_irq.c * arch/sparc/kernel/sun4c_irq.c: * * djhr: Hacked out of irq.c into a CPU dependent version. * * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) * Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx) * Copyright (C) 1995 Pete A. Zaitcev (zaitcev@ipmce.su) * Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk) */ #include <linux/ptrace.h> #include <linux/errno.h> #include <linux/linkage.h> #include <linux/kernel_stat.h> #include <linux/signal.h> #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/malloc.h> #include <asm/ptrace.h> #include <asm/processor.h> #include <asm/system.h> #include <asm/psr.h> #include <asm/vaddrs.h> #include <asm/timer.h> #include <asm/openprom.h> #include <asm/oplib.h> #include <asm/traps.h> #include <asm/irq.h> #include <asm/io.h> /* Pointer to the interrupt enable byte * * Dave Redman (djhr@tadpole.co.uk) * What you may not be aware of is that entry.S requires this variable. * * --- linux_trap_nmi_sun4c -- * * so don't go making it static, like I tried. sigh. */ unsigned char *interrupt_enable = 0; static void sun4c_disable_irq(unsigned int irq_nr) { unsigned long flags; unsigned char current_mask, new_mask; save_flags(flags); cli(); irq_nr &= NR_IRQS; current_mask = *interrupt_enable; switch(irq_nr) { case 1: new_mask = ((current_mask) & (~(SUN4C_INT_E1))); break; case 8: new_mask = ((current_mask) & (~(SUN4C_INT_E8))); break; case 10: new_mask = ((current_mask) & (~(SUN4C_INT_E10))); break; case 14: new_mask = ((current_mask) & (~(SUN4C_INT_E14))); break; default: restore_flags(flags); return; } *interrupt_enable = new_mask; restore_flags(flags); } static void sun4c_enable_irq(unsigned int irq_nr) { unsigned long flags; unsigned char current_mask, new_mask; save_flags(flags); cli(); irq_nr &= NR_IRQS; current_mask = *interrupt_enable; switch(irq_nr) { case 1: new_mask = ((current_mask) | SUN4C_INT_E1); break; case 8: new_mask = ((current_mask) | SUN4C_INT_E8); break; case 10: new_mask = ((current_mask) | SUN4C_INT_E10); break; case 14: new_mask = ((current_mask) | SUN4C_INT_E14); break; default: restore_flags(flags); return; } *interrupt_enable = new_mask; restore_flags(flags); } #define TIMER_IRQ 10 /* Also at level 14, but we ignore that one. */ #define PROFILE_IRQ 14 /* Level14 ticker.. used by OBP for polling */ volatile struct sun4c_timer_info *sun4c_timers; static void sun4c_clear_clock_irq(void) { volatile unsigned int clear_intr; clear_intr = sun4c_timers->timer_limit10; } static void sun4c_clear_profile_irq(void ) { /* Errm.. not sure how to do this.. */ } static void sun4c_load_profile_irq(unsigned int limit) { /* Errm.. not sure how to do this.. */ } static void sun4c_init_timers(void (*counter_fn)(int, void *, struct pt_regs *)) { int irq; /* Map the Timer chip, this is implemented in hardware inside * the cache chip on the sun4c. */ sun4c_timers = sparc_alloc_io ((void *) SUN4C_TIMER_PHYSADDR, 0, sizeof(struct sun4c_timer_info), "timer", 0x0, 0x0); /* Have the level 10 timer tick at 100HZ. We don't touch the * level 14 timer limit since we are letting the prom handle * them until we have a real console driver so L1-A works. */ sun4c_timers->timer_limit10 = (((1000000/HZ) + 1) << 10); irq = request_irq(TIMER_IRQ, counter_fn, (SA_INTERRUPT | SA_STATIC_ALLOC), "timer", NULL); if (irq) { prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ); prom_halt(); } claim_ticker14(NULL, PROFILE_IRQ, 0); } static void sun4c_nop(void) { } void sun4c_init_IRQ(void) { struct linux_prom_registers int_regs[2]; int ie_node; ie_node = prom_searchsiblings (prom_getchild(prom_root_node), "interrupt-enable"); if(ie_node == 0) panic("Cannot find /interrupt-enable node"); /* Depending on the "address" property is bad news... */ prom_getproperty(ie_node, "reg", (char *) int_regs, sizeof(int_regs)); interrupt_enable = (char *) sparc_alloc_io(int_regs[0].phys_addr, 0, int_regs[0].reg_size, "sun4c_interrupts", int_regs[0].which_io, 0x0); enable_irq = sun4c_enable_irq; disable_irq = sun4c_disable_irq; clear_clock_irq = sun4c_clear_clock_irq; clear_profile_irq = sun4c_clear_profile_irq; load_profile_irq = sun4c_load_profile_irq; init_timers = sun4c_init_timers; #ifdef __SMP__ set_cpu_int = sun4c_nop; clear_cpu_int = sun4c_nop; set_irq_udt = sun4c_nop; #endif *interrupt_enable = (SUN4C_INT_ENABLE); sti(); }
Go to most recent revision | Compare with Previous | Blame | View Log