OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [uclinux/] [uClinux-2.0.x/] [drivers/] [isdn/] [Config.in] - Rev 1765

Compare with Previous | Blame | View Log

#
# ISDN device configuration
#
if [ "$CONFIG_INET" != "n" ]; then
  bool 'Support synchronous PPP' CONFIG_ISDN_PPP
  if [ "$CONFIG_ISDN_PPP" != "n" ]; then
    bool 'Use VJ-compression with synchronous PPP' CONFIG_ISDN_PPP_VJ
    bool 'Support generic MP (RFC 1717)' CONFIG_ISDN_MPP
  fi
  #bool 'Support dynamic timeout-rules' CONFIG_ISDN_TIMEOUT_RULES
  #if [ "$CONFIG_ISDN_TIMEOUT_RULES" != "n" ]; then
  #  bool 'Use masqueraded addresses for rule-matching' CONFIG_ISDN_TIMRU_USE_MASQ
  #fi
  #bool 'Support budget-accounting' CONFIG_ISDN_BUDGET
fi
bool 'Support audio via ISDN' CONFIG_ISDN_AUDIO
dep_tristate 'ICN 2B and 4B support' CONFIG_ISDN_DRV_ICN $CONFIG_ISDN
dep_tristate 'isdnloop support' CONFIG_ISDN_DRV_LOOP $CONFIG_ISDN
dep_tristate 'PCBIT-D support' CONFIG_ISDN_DRV_PCBIT $CONFIG_ISDN
dep_tristate 'HiSax SiemensChipSet driver support' CONFIG_ISDN_DRV_HISAX $CONFIG_ISDN
if [ "$CONFIG_ISDN_DRV_HISAX" != "n" ]; then
    bool 'HiSax Support for EURO/DSS1' CONFIG_HISAX_EURO
    if [ "$CONFIG_HISAX_EURO" != "n" ]; then
            bool 'Support for german chargeinfo' CONFIG_DE_AOC
            bool 'Disable sending complete' CONFIG_HISAX_NO_SENDCOMPLETE
            bool 'Disable sending low layer compatibility' CONFIG_HISAX_NO_LLC
    fi
    bool 'HiSax Support for german 1TR6' CONFIG_HISAX_1TR6
    bool 'HiSax Support for Teles 16.0/8.0' CONFIG_HISAX_16_0
    bool 'HiSax Support for Teles 16.3 or PNP or PCMCIA' CONFIG_HISAX_16_3
    bool 'HiSax Support for Teles 16.3c' CONFIG_HISAX_TELES3C 
    bool 'HiSax Support for Teles PCI' CONFIG_HISAX_TELESPCI 
    bool 'HiSax Support for Teles S0Box' CONFIG_HISAX_S0BOX 
    bool 'HiSax Support for AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1
    bool 'HiSax Support for AVM PnP/PCI (Fritz!PnP/PCI)' CONFIG_HISAX_FRITZPCI
    bool 'HiSax Support for AVM A1 PCMCIA (Fritz)' CONFIG_HISAX_AVM_A1_PCMCIA
    bool 'HiSax Support for Elsa cards' CONFIG_HISAX_ELSA
    bool 'HiSax Support for ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2
    bool 'HiSax Support for Eicon.Diehl Diva cards' CONFIG_HISAX_DIEHLDIVA
    bool 'HiSax Support for ASUSCOM cards' CONFIG_HISAX_ASUSCOM
    bool 'HiSax Support for TELEINT cards' CONFIG_HISAX_TELEINT
    bool 'HiSax Support for Sedlbauer cards' CONFIG_HISAX_SEDLBAUER
    bool 'HiSax Support for USR Sportster internal TA' CONFIG_HISAX_SPORTSTER
    bool 'HiSax Support for MIC card' CONFIG_HISAX_MIC
    bool 'HiSax Support for NETjet card' CONFIG_HISAX_NETJET
    bool 'HiSax Support for Niccy PnP/PCI card' CONFIG_HISAX_NICCY
fi
if [ "$CONFIG_EXPERIMENTAL" != "n" ]; then
        dep_tristate 'Spellcaster support (EXPERIMENTAL)' CONFIG_ISDN_DRV_SC $CONFIG_ISDN
fi
dep_tristate 'AVM-B1 with CAPI2.0 support' CONFIG_ISDN_DRV_AVMB1 $CONFIG_ISDN
if [ "$CONFIG_ISDN_DRV_AVMB1" != "n" ]; then
    bool 'Verbose reason code reporting (kernel size +=7K)' CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON
fi

Compare with Previous | Blame | View Log

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.