URL
https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k
[/] [or1k/] [trunk/] [uclinux/] [uClinux-2.0.x/] [drivers/] [scsi/] [NCR53c406a.c] - Rev 1765
Compare with Previous | Blame | View Log
/* * NCR53c406.c * Low-level SCSI driver for NCR53c406a chip. * Copyright (C) 1994, 1995, 1996 Normunds Saumanis (normunds@fi.ibm.com) * * LILO command line usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]] * Specify IRQ = 0 for non-interrupt driven mode. * FASTPIO = 1 for fast pio mode, 0 for slow mode. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any * later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * */ #define NCR53C406A_DEBUG 0 #define VERBOSE_NCR53C406A_DEBUG 0 /* Set this to 1 for PIO mode (recommended) or to 0 for DMA mode */ #define USE_PIO 1 #define USE_BIOS 0 /* #define BIOS_ADDR 0xD8000 */ /* define this if autoprobe fails */ /* #define PORT_BASE 0x330 */ /* define this if autoprobe fails */ /* #define IRQ_LEV 0 */ /* define this if autoprobe fails */ #define DMA_CHAN 5 /* this is ignored if DMA is disabled */ /* Set this to 0 if you encounter kernel lockups while transferring * data in PIO mode */ #define USE_FAST_PIO 1 /* ============= End of user configurable parameters ============= */ #include <linux/module.h> #include <linux/errno.h> #include <linux/ioport.h> #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/proc_fs.h> #include <linux/stat.h> #include <asm/io.h> #include <asm/dma.h> #include <asm/bitops.h> #include <asm/irq.h> #include <linux/blk.h> #include "scsi.h" #include "hosts.h" #include "sd.h" #include "NCR53c406a.h" /* ============================================================= */ #define WATCHDOG 5000000 #define SYNC_MODE 0 /* Synchronous transfer mode */ #if DEBUG #undef NCR53C406A_DEBUG #define NCR53C406A_DEBUG 1 #endif #if USE_PIO #define USE_DMA 0 #else #define USE_DMA 1 #endif /* Default configuration */ #define C1_IMG 0x07 /* ID=7 */ #define C2_IMG 0x48 /* FE SCSI2 */ #if USE_DMA #define C3_IMG 0x21 /* CDB TE */ #else #define C3_IMG 0x20 /* CDB */ #endif #define C4_IMG 0x04 /* ANE */ #define C5_IMG 0xb6 /* AA PI SIE POL */ #define REG0 (outb(C4_IMG, CONFIG4)) #define REG1 (outb(C5_IMG, CONFIG5)) #if NCR53C406A_DEBUG #define DEB(x) x #else #define DEB(x) #endif #if VERBOSE_NCR53C406A_DEBUG #define VDEB(x) x #else #define VDEB(x) #endif #define LOAD_DMA_COUNT(count) \ outb(count & 0xff, TC_LSB); \ outb((count >> 8) & 0xff, TC_MSB); \ outb((count >> 16) & 0xff, TC_HIGH); /* Chip commands */ #define DMA_OP 0x80 #define SCSI_NOP 0x00 #define FLUSH_FIFO 0x01 #define CHIP_RESET 0x02 #define SCSI_RESET 0x03 #define RESELECT 0x40 #define SELECT_NO_ATN 0x41 #define SELECT_ATN 0x42 #define SELECT_ATN_STOP 0x43 #define ENABLE_SEL 0x44 #define DISABLE_SEL 0x45 #define SELECT_ATN3 0x46 #define RESELECT3 0x47 #define TRANSFER_INFO 0x10 #define INIT_CMD_COMPLETE 0x11 #define MSG_ACCEPT 0x12 #define TRANSFER_PAD 0x18 #define SET_ATN 0x1a #define RESET_ATN 0x1b #define SEND_MSG 0x20 #define SEND_STATUS 0x21 #define SEND_DATA 0x22 #define DISCONN_SEQ 0x23 #define TERMINATE_SEQ 0x24 #define TARG_CMD_COMPLETE 0x25 #define DISCONN 0x27 #define RECV_MSG 0x28 #define RECV_CMD 0x29 #define RECV_DATA 0x2a #define RECV_CMD_SEQ 0x2b #define TARGET_ABORT_DMA 0x04 /*----------------------------------------------------------------*/ /* the following will set the monitor border color (useful to find where something crashed or gets stuck at */ /* 1 = blue 2 = green 3 = cyan 4 = red 5 = magenta 6 = yellow 7 = white */ #if NCR53C406A_DEBUG #define rtrc(i) {inb(0x3da);outb(0x31,0x3c0);outb((i),0x3c0);} #else #define rtrc(i) {} #endif /*----------------------------------------------------------------*/ enum Phase { idle, data_out, data_in, command_ph, status_ph, message_out, message_in }; /* Static function prototypes */ static void NCR53c406a_intr(int, void *, struct pt_regs *); static void internal_done(Scsi_Cmnd *); static void wait_intr(void); static void chip_init(void); static void calc_port_addr(void); #ifndef IRQ_LEV static int irq_probe(void); #endif /* ================================================================= */ #if USE_BIOS static void *bios_base = (void *)0; #endif #if PORT_BASE static int port_base = PORT_BASE; #else static int port_base = 0; #endif #if IRQ_LEV static int irq_level = IRQ_LEV; #else static int irq_level = -1; /* 0 is 'no irq', so use -1 for 'uninitialized'*/ #endif #if USE_DMA static int dma_chan = 0; #endif #if USE_PIO static int fast_pio = USE_FAST_PIO; #endif static Scsi_Cmnd *current_SC = NULL; static volatile int internal_done_flag = 0; static volatile int internal_done_errcode = 0; static char info_msg[256]; struct proc_dir_entry proc_scsi_NCR53c406a = { PROC_SCSI_NCR53C406A, 7, "NCR53c406a", S_IFDIR | S_IRUGO | S_IXUGO, 2 }; /* ================================================================= */ /* possible BIOS locations */ #if USE_BIOS static void *addresses[] = { (void *)0xd8000, (void *)0xc8000 }; #define ADDRESS_COUNT (sizeof( addresses ) / sizeof( unsigned )) #endif USE_BIOS /* possible i/o port addresses */ static unsigned short ports[] = { 0x230, 0x330 }; #define PORT_COUNT (sizeof( ports ) / sizeof( unsigned short )) /* possible interrupt channels */ static unsigned short intrs[] = { 10, 11, 12, 15 }; #define INTR_COUNT (sizeof( intrs ) / sizeof( unsigned short )) /* signatures for NCR 53c406a based controllers */ #if USE_BIOS struct signature { char *signature; int sig_offset; int sig_length; } signatures[] = { /* 1 2 3 4 5 6 */ /* 123456789012345678901234567890123456789012345678901234567890 */ { "Copyright (C) Acculogic, Inc.\r\n2.8M Diskette Extension Bios ver 4.04.03 03/01/1993", 61, 82 }, }; #define SIGNATURE_COUNT (sizeof( signatures ) / sizeof( struct signature )) #endif USE_BIOS /* ============================================================ */ /* Control Register Set 0 */ static int TC_LSB; /* transfer counter lsb */ static int TC_MSB; /* transfer counter msb */ static int SCSI_FIFO; /* scsi fifo register */ static int CMD_REG; /* command register */ static int STAT_REG; /* status register */ static int DEST_ID; /* selection/reselection bus id */ static int INT_REG; /* interrupt status register */ static int SRTIMOUT; /* select/reselect timeout reg */ static int SEQ_REG; /* sequence step register */ static int SYNCPRD; /* synchronous transfer period */ static int FIFO_FLAGS; /* indicates # of bytes in fifo */ static int SYNCOFF; /* synchronous offset register */ static int CONFIG1; /* configuration register */ static int CLKCONV; /* clock conversion reg */ /*static int TESTREG;*/ /* test mode register */ static int CONFIG2; /* Configuration 2 Register */ static int CONFIG3; /* Configuration 3 Register */ static int CONFIG4; /* Configuration 4 Register */ static int TC_HIGH; /* Transfer Counter High */ /*static int FIFO_BOTTOM;*/ /* Reserve FIFO byte register */ /* Control Register Set 1 */ /*static int JUMPER_SENSE;*/ /* Jumper sense port reg (r/w) */ /*static int SRAM_PTR;*/ /* SRAM address pointer reg (r/w) */ /*static int SRAM_DATA;*/ /* SRAM data register (r/w) */ static int PIO_FIFO; /* PIO FIFO registers (r/w) */ /*static int PIO_FIFO1;*/ /* */ /*static int PIO_FIFO2;*/ /* */ /*static int PIO_FIFO3;*/ /* */ static int PIO_STATUS; /* PIO status (r/w) */ /*static int ATA_CMD;*/ /* ATA command/status reg (r/w) */ /*static int ATA_ERR;*/ /* ATA features/error register (r/w)*/ static int PIO_FLAG; /* PIO flag interrupt enable (r/w) */ static int CONFIG5; /* Configuration 5 register (r/w) */ /*static int SIGNATURE;*/ /* Signature Register (r) */ /*static int CONFIG6;*/ /* Configuration 6 register (r) */ /* ============================================================== */ #if USE_DMA static __inline__ int NCR53c406a_dma_setup (unsigned char *ptr, unsigned int count, unsigned char mode) { unsigned limit; unsigned long flags = 0; VDEB(printk("dma: before count=%d ", count)); if (dma_chan <=3) { if (count > 65536) count = 65536; limit = 65536 - (((unsigned) ptr) & 0xFFFF); } else { if (count > (65536<<1)) count = (65536<<1); limit = (65536<<1) - (((unsigned) ptr) & 0x1FFFF); } if (count > limit) count = limit; VDEB(printk("after count=%d\n", count)); if ((count & 1) || (((unsigned) ptr) & 1)) panic ("NCR53c406a: attempted unaligned DMA transfer\n"); save_flags(flags); cli(); disable_dma(dma_chan); clear_dma_ff(dma_chan); set_dma_addr(dma_chan, (long) ptr); set_dma_count(dma_chan, count); set_dma_mode(dma_chan, mode); enable_dma(dma_chan); restore_flags(flags); return count; } static __inline__ int NCR53c406a_dma_write(unsigned char *src, unsigned int count) { return NCR53c406a_dma_setup (src, count, DMA_MODE_WRITE); } static __inline__ int NCR53c406a_dma_read(unsigned char *src, unsigned int count) { return NCR53c406a_dma_setup (src, count, DMA_MODE_READ); } static __inline__ int NCR53c406a_dma_residual (void) { register int tmp; unsigned long flags = 0; save_flags(flags); cli(); clear_dma_ff(dma_chan); tmp = get_dma_residue(dma_chan); restore_flags(flags); return tmp; } #endif USE_DMA #if USE_PIO static __inline__ int NCR53c406a_pio_read(unsigned char *request, unsigned int reqlen) { int i; int len; /* current scsi fifo size */ unsigned long flags = 0; REG1; while (reqlen) { i = inb(PIO_STATUS); /* VDEB(printk("pio_status=%x\n", i)); */ if (i & 0x80) return 0; switch( i & 0x1e ) { default: case 0x10: len=0; break; case 0x0: len=1; break; case 0x8: len=42; break; case 0xc: len=84; break; case 0xe: len=128; break; } if ((i & 0x40) && len == 0) { /* fifo empty and interrupt occurred */ return 0; } if (len) { if( len > reqlen ) len = reqlen; save_flags(flags); cli(); if( fast_pio && len > 3 ) { insl(PIO_FIFO,request,len>>2); request += len & 0xfc; reqlen -= len & 0xfc; } else { while(len--) { *request++ = inb(PIO_FIFO); reqlen--; } } restore_flags(flags); } } return 0; } static __inline__ int NCR53c406a_pio_write(unsigned char *request, unsigned int reqlen) { int i = 0; int len; /* current scsi fifo size */ unsigned long flags = 0; REG1; while (reqlen && !(i&0x40)) { i = inb(PIO_STATUS); /* VDEB(printk("pio_status=%x\n", i)); */ if (i & 0x80) /* error */ return 0; switch( i & 0x1e ) { case 0x10: len=128; break; case 0x0: len=84; break; case 0x8: len=42; break; case 0xc: len=1; break; default: case 0xe: len=0; break; } if (len) { if( len > reqlen ) len = reqlen; save_flags(flags); cli(); if( fast_pio && len > 3 ) { outsl(PIO_FIFO,request,len>>2); request += len & 0xfc; reqlen -= len & 0xfc; } else { while(len--) { outb(*request++, PIO_FIFO); reqlen--; } } restore_flags(flags); } } return 0; } #endif USE_PIO int NCR53c406a_detect(Scsi_Host_Template * tpnt){ struct Scsi_Host *shpnt; #ifndef PORT_BASE int i; #endif #if USE_BIOS int ii, jj; bios_base = 0; /* look for a valid signature */ for( ii=0; ii < ADDRESS_COUNT && !bios_base; ii++) for( jj=0; (jj < SIGNATURE_COUNT) && !bios_base; jj++) if(!memcmp((void *) addresses[ii]+signatures[jj].sig_offset, (void *) signatures[jj].signature, (int) signatures[jj].sig_length)) bios_base=addresses[ii]; if(!bios_base){ printk("NCR53c406a: BIOS signature not found\n"); return 0; } DEB(printk("NCR53c406a BIOS found at %X\n", (unsigned int) bios_base);); #endif USE_BIOS #ifdef PORT_BASE if (check_region(port_base, 0x10)) /* ports already snatched */ port_base = 0; #else /* autodetect */ if (port_base) { /* LILO override */ if (check_region(port_base, 0x10)) port_base = 0; } else { for(i=0; i<PORT_COUNT && !port_base; i++){ if(check_region(ports[i], 0x10)){ DEB(printk("NCR53c406a: port %x in use\n", ports[i])); } else { VDEB(printk("NCR53c406a: port %x available\n", ports[i])); outb(C5_IMG, ports[i] + 0x0d); /* reg set 1 */ if( (inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7 && (inb(ports[i] + 0x0e) ^ inb(ports[i] + 0x0e)) == 7 && (inb(ports[i] + 0x0e) & 0xf8) == 0x58 ) { VDEB(printk("NCR53c406a: Sig register valid\n")); VDEB(printk("port_base=%x\n", port_base)); port_base = ports[i]; } } } } #endif PORT_BASE if(!port_base){ /* no ports found */ printk("NCR53c406a: no available ports found\n"); return 0; } DEB(printk("NCR53c406a detected\n")); calc_port_addr(); chip_init(); #ifndef IRQ_LEV if (irq_level < 0) { /* LILO override if >= 0*/ irq_level=irq_probe(); if (irq_level < 0) { /* Trouble */ printk("NCR53c406a: IRQ problem, irq_level=%d, giving up\n", irq_level); return 0; } } #endif DEB(printk("NCR53c406a: using port_base %x\n", port_base)); request_region(port_base, 0x10, "NCR53c406a"); if(irq_level > 0) { if(request_irq(irq_level, NCR53c406a_intr, 0, "NCR53c406a", NULL)){ printk("NCR53c406a: unable to allocate IRQ %d\n", irq_level); return 0; } tpnt->can_queue = 1; DEB(printk("NCR53c406a: allocated IRQ %d\n", irq_level)); } else if (irq_level == 0) { tpnt->can_queue = 0; DEB(printk("NCR53c406a: No interrupts detected\n")); #if USE_DMA printk("NCR53c406a: No interrupts found and DMA mode defined. Giving up.\n"); return 0; #endif USE_DMA } else { DEB(printk("NCR53c406a: Shouldn't get here!\n")); return 0; } #if USE_DMA dma_chan = DMA_CHAN; if(request_dma(dma_chan, "NCR53c406a") != 0){ printk("NCR53c406a: unable to allocate DMA channel %d\n", dma_chan); return 0; } DEB(printk("Allocated DMA channel %d\n", dma_chan)); #endif USE_DMA tpnt->present = 1; tpnt->proc_dir = &proc_scsi_NCR53c406a; shpnt = scsi_register(tpnt, 0); shpnt->irq = irq_level; shpnt->io_port = port_base; shpnt->n_io_port = 0x10; #if USE_DMA shpnt->dma = dma_chan; #endif #if USE_DMA sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, DMA channel %d.", port_base, irq_level, dma_chan); #else sprintf(info_msg, "NCR53c406a at 0x%x, IRQ %d, %s PIO mode.", port_base, irq_level, fast_pio ? "fast" : "slow"); #endif return (tpnt->present); } /* called from init/main.c */ void NCR53c406a_setup(char *str, int *ints) { static size_t setup_idx = 0; size_t i; DEB(printk("NCR53c406a: Setup called\n");); if (setup_idx >= PORT_COUNT - 1) { printk("NCR53c406a: Setup called too many times. Bad LILO params?\n"); return; } if (ints[0] < 1 || ints[0] > 3) { printk("NCR53c406a: Malformed command line\n"); printk("NCR53c406a: Usage: ncr53c406a=<PORTBASE>[,<IRQ>[,<FASTPIO>]]\n"); return; } for (i = 0; i < PORT_COUNT && !port_base; i++) if (ports[i] == ints[1]) { port_base = ints[1]; DEB(printk("NCR53c406a: Specified port_base 0x%X\n", port_base);) } if (!port_base) { printk("NCR53c406a: Invalid PORTBASE 0x%X specified\n", ints[1]); return; } if (ints[0] > 1) { if (ints[2] == 0) { irq_level = 0; DEB(printk("NCR53c406a: Specified irq %d\n", irq_level);) } else for (i = 0; i < INTR_COUNT && irq_level < 0; i++) if (intrs[i] == ints[2]) { irq_level = ints[2]; DEB(printk("NCR53c406a: Specified irq %d\n", port_base);) } if (irq_level < 0) printk("NCR53c406a: Invalid IRQ %d specified\n", ints[2]); } if (ints[0] > 2) fast_pio = ints[3]; DEB(printk("NCR53c406a: port_base=0x%X, irq=%d, fast_pio=%d\n", port_base, irq_level, fast_pio);) } const char* NCR53c406a_info(struct Scsi_Host *SChost){ DEB(printk("NCR53c406a_info called\n")); return (info_msg); } static void internal_done(Scsi_Cmnd *SCpnt) { internal_done_errcode = SCpnt->result; ++internal_done_flag; } static void wait_intr() { int i = jiffies + WATCHDOG; while(i>jiffies && !(inb(STAT_REG)&0xe0)) /* wait for a pseudo-interrupt */ barrier(); if (i <= jiffies) { /* Timed out */ rtrc(0); current_SC->result = DID_TIME_OUT << 16; current_SC->SCp.phase = idle; current_SC->scsi_done(current_SC); return; } NCR53c406a_intr(0, NULL, NULL); } int NCR53c406a_command(Scsi_Cmnd *SCpnt){ DEB(printk("NCR53c406a_command called\n")); NCR53c406a_queue(SCpnt, internal_done); if(irq_level) while (!internal_done_flag); else /* interrupts not supported */ while (!internal_done_flag) wait_intr(); internal_done_flag = 0; return internal_done_errcode; } int NCR53c406a_queue(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)){ int i; unsigned long flags = 0; VDEB(printk("NCR53c406a_queue called\n")); DEB(printk("cmd=%02x, cmd_len=%02x, target=%02x, lun=%02x, bufflen=%d\n", SCpnt->cmnd[0], SCpnt->cmd_len, SCpnt->target, SCpnt->lun, SCpnt->request_bufflen)); #if 0 VDEB(for(i=0; i<SCpnt->cmd_len; i++) printk("cmd[%d]=%02x ", i, SCpnt->cmnd[i])); VDEB(printk("\n")); #endif current_SC = SCpnt; current_SC->scsi_done = done; current_SC->SCp.phase = command_ph; current_SC->SCp.Status = 0; current_SC->SCp.Message = 0; save_flags(flags); cli(); REG0; outb(SCpnt->target, DEST_ID); /* set destination */ outb(FLUSH_FIFO, CMD_REG); /* reset the fifos */ for(i=0; i<SCpnt->cmd_len; i++){ outb(SCpnt->cmnd[i], SCSI_FIFO); } outb(SELECT_NO_ATN, CMD_REG); restore_flags(flags); rtrc(1); return 0; } int NCR53c406a_abort(Scsi_Cmnd *SCpnt){ DEB(printk("NCR53c406a_abort called\n")); return SCSI_ABORT_SNOOZE; /* Don't know how to abort */ } int NCR53c406a_reset(Scsi_Cmnd *SCpnt, unsigned int flags){ DEB(printk("NCR53c406a_reset called\n")); outb(C4_IMG, CONFIG4); /* Select reg set 0 */ outb(CHIP_RESET, CMD_REG); outb(SCSI_NOP, CMD_REG); /* required after reset */ outb(SCSI_RESET, CMD_REG); chip_init(); rtrc(2); if (irq_level) return SCSI_RESET_PENDING; /* should get an interrupt */ else return SCSI_RESET_WAKEUP; /* won't get any interrupts */ } int NCR53c406a_biosparm(Scsi_Disk *disk, kdev_t dev, int* info_array){ int size; DEB(printk("NCR53c406a_biosparm called\n")); size = disk->capacity; info_array[0] = 64; /* heads */ info_array[1] = 32; /* sectors */ info_array[2] = size>>11; /* cylinders */ if (info_array[2] > 1024) { /* big disk */ info_array[0] = 255; info_array[1] = 63; info_array[2] = size / (255*63); } return 0; } static void NCR53c406a_intr(int unused, void *dev_id, struct pt_regs *regs){ DEB(unsigned char fifo_size;) DEB(unsigned char seq_reg;) unsigned char status, int_reg; unsigned long flags = 0; #if USE_PIO unsigned char pio_status; struct scatterlist *sglist; unsigned int sgcount; #endif VDEB(printk("NCR53c406a_intr called\n")); save_flags(flags); cli(); #if USE_PIO REG1; pio_status = inb(PIO_STATUS); #endif REG0; status = inb(STAT_REG); DEB(seq_reg = inb(SEQ_REG)); int_reg = inb(INT_REG); DEB(fifo_size = inb(FIFO_FLAGS) & 0x1f); restore_flags(flags); #if NCR53C406A_DEBUG printk("status=%02x, seq_reg=%02x, int_reg=%02x, fifo_size=%02x", status, seq_reg, int_reg, fifo_size); #if (USE_DMA) printk("\n"); #else printk(", pio=%02x\n", pio_status); #endif USE_DMA #endif NCR53C406A_DEBUG if(int_reg & 0x80){ /* SCSI reset intr */ rtrc(3); DEB(printk("NCR53c406a: reset intr received\n")); current_SC->SCp.phase = idle; current_SC->result = DID_RESET << 16; current_SC->scsi_done(current_SC); return; } #if USE_PIO if(pio_status & 0x80) { printk("NCR53C406A: Warning: PIO error!\n"); current_SC->SCp.phase = idle; current_SC->result = DID_ERROR << 16; current_SC->scsi_done(current_SC); return; } #endif USE_PIO if(status & 0x20) { /* Parity error */ printk("NCR53c406a: Warning: parity error!\n"); current_SC->SCp.phase = idle; current_SC->result = DID_PARITY << 16; current_SC->scsi_done(current_SC); return; } if(status & 0x40) { /* Gross error */ printk("NCR53c406a: Warning: gross error!\n"); current_SC->SCp.phase = idle; current_SC->result = DID_ERROR << 16; current_SC->scsi_done(current_SC); return; } if(int_reg & 0x20){ /* Disconnect */ DEB(printk("NCR53c406a: disconnect intr received\n")); if(current_SC->SCp.phase != message_in){ /* Unexpected disconnect */ current_SC->result = DID_NO_CONNECT << 16; } else{ /* Command complete, return status and message */ current_SC->result = (current_SC->SCp.Status & 0xff) | ((current_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16); } rtrc(0); current_SC->SCp.phase = idle; current_SC->scsi_done( current_SC ); return; } switch(status & 0x07){ /* scsi phase */ case 0x00: /* DATA-OUT */ if(int_reg & 0x10){ /* Target requesting info transfer */ rtrc(5); current_SC->SCp.phase = data_out; VDEB(printk("NCR53c406a: Data-Out phase\n")); outb(FLUSH_FIFO, CMD_REG); LOAD_DMA_COUNT(current_SC->request_bufflen); /* Max transfer size */ #if USE_DMA /* No s/g support for DMA */ NCR53c406a_dma_write(current_SC->request_buffer, current_SC->request_bufflen); #endif USE_DMA outb(TRANSFER_INFO | DMA_OP, CMD_REG); #if USE_PIO if (!current_SC->use_sg) /* Don't use scatter-gather */ NCR53c406a_pio_write(current_SC->request_buffer, current_SC->request_bufflen); else { /* use scatter-gather */ sgcount = current_SC->use_sg; sglist = current_SC->request_buffer; while( sgcount-- ) { NCR53c406a_pio_write(sglist->address, sglist->length); sglist++; } } REG0; #endif USE_PIO } break; case 0x01: /* DATA-IN */ if(int_reg & 0x10){ /* Target requesting info transfer */ rtrc(6); current_SC->SCp.phase = data_in; VDEB(printk("NCR53c406a: Data-In phase\n")); outb(FLUSH_FIFO, CMD_REG); LOAD_DMA_COUNT(current_SC->request_bufflen); /* Max transfer size */ #if USE_DMA /* No s/g support for DMA */ NCR53c406a_dma_read(current_SC->request_buffer, current_SC->request_bufflen); #endif USE_DMA outb(TRANSFER_INFO | DMA_OP, CMD_REG); #if USE_PIO if (!current_SC->use_sg) /* Don't use scatter-gather */ NCR53c406a_pio_read(current_SC->request_buffer, current_SC->request_bufflen); else { /* Use scatter-gather */ sgcount = current_SC->use_sg; sglist = current_SC->request_buffer; while( sgcount-- ) { NCR53c406a_pio_read(sglist->address, sglist->length); sglist++; } } REG0; #endif USE_PIO } break; case 0x02: /* COMMAND */ current_SC->SCp.phase = command_ph; printk("NCR53c406a: Warning: Unknown interrupt occurred in command phase!\n"); break; case 0x03: /* STATUS */ rtrc(7); current_SC->SCp.phase = status_ph; VDEB(printk("NCR53c406a: Status phase\n")); outb(FLUSH_FIFO, CMD_REG); outb(INIT_CMD_COMPLETE, CMD_REG); break; case 0x04: /* Reserved */ case 0x05: /* Reserved */ printk("NCR53c406a: WARNING: Reserved phase!!!\n"); break; case 0x06: /* MESSAGE-OUT */ DEB(printk("NCR53c406a: Message-Out phase\n")); current_SC->SCp.phase = message_out; outb(SET_ATN, CMD_REG); /* Reject the message */ outb(MSG_ACCEPT, CMD_REG); break; case 0x07: /* MESSAGE-IN */ rtrc(4); VDEB(printk("NCR53c406a: Message-In phase\n")); current_SC->SCp.phase = message_in; current_SC->SCp.Status = inb(SCSI_FIFO); current_SC->SCp.Message = inb(SCSI_FIFO); VDEB(printk("SCSI FIFO size=%d\n", inb(FIFO_FLAGS) & 0x1f)); DEB(printk("Status = %02x Message = %02x\n", current_SC->SCp.Status, current_SC->SCp.Message)); if(current_SC->SCp.Message == SAVE_POINTERS || current_SC->SCp.Message == DISCONNECT) { outb(SET_ATN, CMD_REG); /* Reject message */ DEB(printk("Discarding SAVE_POINTERS message\n")); } outb(MSG_ACCEPT, CMD_REG); break; } } #ifndef IRQ_LEV static int irq_probe() { int irqs, irq; int i; inb(INT_REG); /* clear the interrupt register */ sti(); irqs = probe_irq_on(); /* Invalid command will cause an interrupt */ REG0; outb(0xff, CMD_REG); /* Wait for the interrupt to occur */ i = jiffies + WATCHDOG; while(i > jiffies && !(inb(STAT_REG) & 0x80)) barrier(); if (i <= jiffies) { /* Timed out, must be hardware trouble */ probe_irq_off(irqs); return -1; } irq = probe_irq_off(irqs); /* Kick the chip */ outb(CHIP_RESET, CMD_REG); outb(SCSI_NOP, CMD_REG); chip_init(); return irq; } #endif IRQ_LEV static void chip_init() { REG1; #if USE_DMA outb(0x00, PIO_STATUS); #else /* USE_PIO */ outb(0x01, PIO_STATUS); #endif outb(0x00, PIO_FLAG); outb(C4_IMG, CONFIG4); /* REG0; */ outb(C3_IMG, CONFIG3); outb(C2_IMG, CONFIG2); outb(C1_IMG, CONFIG1); outb(0x05, CLKCONV); /* clock conversion factor */ outb(0x9C, SRTIMOUT); /* Selection timeout */ outb(0x05, SYNCPRD); /* Synchronous transfer period */ outb(SYNC_MODE, SYNCOFF); /* synchronous mode */ } void calc_port_addr() { /* Control Register Set 0 */ TC_LSB = (port_base+0x00); TC_MSB = (port_base+0x01); SCSI_FIFO = (port_base+0x02); CMD_REG = (port_base+0x03); STAT_REG = (port_base+0x04); DEST_ID = (port_base+0x04); INT_REG = (port_base+0x05); SRTIMOUT = (port_base+0x05); SEQ_REG = (port_base+0x06); SYNCPRD = (port_base+0x06); FIFO_FLAGS = (port_base+0x07); SYNCOFF = (port_base+0x07); CONFIG1 = (port_base+0x08); CLKCONV = (port_base+0x09); /* TESTREG = (port_base+0x0A); */ CONFIG2 = (port_base+0x0B); CONFIG3 = (port_base+0x0C); CONFIG4 = (port_base+0x0D); TC_HIGH = (port_base+0x0E); /* FIFO_BOTTOM = (port_base+0x0F); */ /* Control Register Set 1 */ /* JUMPER_SENSE = (port_base+0x00);*/ /* SRAM_PTR = (port_base+0x01);*/ /* SRAM_DATA = (port_base+0x02);*/ PIO_FIFO = (port_base+0x04); /* PIO_FIFO1 = (port_base+0x05);*/ /* PIO_FIFO2 = (port_base+0x06);*/ /* PIO_FIFO3 = (port_base+0x07);*/ PIO_STATUS = (port_base+0x08); /* ATA_CMD = (port_base+0x09);*/ /* ATA_ERR = (port_base+0x0A);*/ PIO_FLAG = (port_base+0x0B); CONFIG5 = (port_base+0x0D); /* SIGNATURE = (port_base+0x0E);*/ /* CONFIG6 = (port_base+0x0F);*/ } #ifdef MODULE /* Eventually this will go into an include file, but this will be later */ Scsi_Host_Template driver_template = NCR53c406a; #include "scsi_module.c" #endif /* * Overrides for Emacs so that we get a uniform tabbing style. * Emacs will notice this stuff at the end of the file and automatically * adjust the settings for this buffer only. This must remain at the end * of the file. * --------------------------------------------------------------------------- * Local variables: * c-indent-level: 4 * c-brace-imaginary-offset: 0 * c-brace-offset: -4 * c-argdecl-indent: 4 * c-label-offset: -4 * c-continued-statement-offset: 4 * c-continued-brace-offset: 0 * indent-tabs-mode: nil * tab-width: 8 * End: */